-
Transmission distance value of inland filament
Hi! with the advent of Hueforge, could Inland please figure out and list their transmission distance for all their filament? Would help greatly for people wanting to use that application, which means more filament sales!
-
Ender 3 Pro Hotend Replacement?
Hello People I have an ender 3 pro and I'm trying to print with PC and ABS but the printer wnt let me get to those temps before releasing toxic chemicals. Does anyone have any recommendations on what type of hotend or trick I can use to print with ABS, PC, PETG?
-
Inland filament types and properties
PLA: Cheap, low temperature resistance, and relatively brittle, this material is a WONDERFUL all rounder with amazing dimensional accuracy and some of the highest tensile strength of most hobby materials most people start printing with this and stick to it because of its cost effectiveness and versatility PLA+: very…
-
Ender-6 isn't homed correctly
I have a Creality Ender-6. I can't get it set up correctly. When I am in the Aux Leveling screen it doesn't seem to know where the nozzle actually is. When I press "3" or "4" it positions the nozzle far to the left of where it should be. I expect the nozzle to be right of center on the Printing Platform but it isn't. If I…
-
Differences in New Inland Filaments
So I recently saw that microcenter now sells petg+ and lite pla but there isnt any clear indication how these new filaments vary from their regular petg, pla and pla+ aside from extruder temperature ranges. Does anyone know the actual differences with these new filaments?
-
Compatibility Auto bed leveler
Bought an Ender-3 V2 also bought a auto bed leveling sensor for the 3D printer however when the gift was open it was noted that the auto bed sensor which is a (BLTouch) was labeled for a use with a Creality V1 mainboard and not for a V2 main board is this sensor compatible with my Ender3-V2 or do I need to return and get…
-
Replacement 5x30 screws for Ender 5 assembly?
A few days ago I bought a Creality Ender 5 at Micro Center (Virginia). I managed to damage two of its 5x30 screws, causing their washers to be near the tip of the screw instead of near the head (photo below). Does anyone know where I can purchase replacements, or maybe how to fix the issue? In this form, I'm unable to…
-
3D Printer for gift
I am looking to buy a 3D printer under $300, this is for my maker wife who can build, program and fix about anything - normally I would go to your store and get recommendations but I am avoiding going into stores. I have done some research and see the Creality Pro is on sale and gets good reviews. Would this be what you…
-
new inland filament manufacturer?
I was buying the Natural Inland PLA, it came in a white box, and it was awesome. Now I just bought some natural PLA and it came in a grey box and it is different and is more brittle. The suggested temperature ranges are also different, so it seems like an entirely new formula. The white box says "new and improved formula"…
-
3D Printing a Retropie Handheld Case with Custom Icons
Recently I decided to print a case for my PiGrrl 2 with the
Atari logo on it. PiGrrl is a series of Raspberry Pi powered portable emulation
consoles produced by Adafruit. PiGrrl 2 is the most recent version to use a
full-sized Raspberry Pi, so it’s more powerful than the three other versions.
Here’s a picture of the…
-
3D Printing Face Shields
Micro Center has been working with hundreds of healthcare professionals and organizations to help make a difference in the fight against COVID-19. Our fleet of 3D printers have been busy printing face shields based on the open source design by PRUSA Research (who has already printed and donated over 35,000!) to support…
-
First time using the Creality Ender 5 Plus
Some friends bought me a ticket to a convention last minute, so I only a few days to cobble together an outfit. I decided to go as a Rebel Fleet Trooper from Star Wars, since I had some pants and a vest that worked. I bought a few shirts and stitched them together to make a bib. I also used craft pleather to sew together a…
-
The manufacturing reset was selected by mistake what can we do
This is a Powerspec made by wanhao I3 plus tried to flash the firmware but the second part of the flashing isn't work with the files I downloaded.
-
How does the warranty for the BambuLab P1S combo work?
I purchased my P1S combo (Bambulab printer + AMS) just under one year ago, and my AMS recently stopped being able to send filament to the printer. I'm 99% sure something is broken or wrong with the internal AMS motor, but BambuLab docs are telling me that I can only request warranty fulfillment through Microcenter, which…
-
Inland Clear Resin has a red/orange hue coming out of the printer
I have an Elegoo Saturn 4 Ultra (12k) and am trying printing in Inland Clear resin for the first time. The first 2 sets of prints have come out with a distinct reddish brown hue. It's noticeable coming from the printer, and more distinct after washing and curing. I cleaned the vat and the build plate thoroughly before…
-
Does MicroCenter work on 3D Printers?
Does MicroCenter work on 3D Printers? I have a multitude of 3D printer issues. I have two of them I can not get anything to print correctly. If not whom can I take them to get checked out?
-
Is the Charlotte Micro Center getting the new Elegoo Centauri Printer
I know the printers are not shipping until mid june but wanted to know if the Charlotte micro center would be getting any
-
Material Safety Data Sheets (MSDS / TDS)
I am wondering if there are any Material Safety Data Sheets (MSDS / TDS) available for your inland Filaments? I want to compare HDT (Heat Deflection Temperature) and Bending Modulus, but it's not available online.
-
Will Bambu P1S Combo be restocked soon?
Wondering if the P1S combo will be restocked soon in Denver, or if I need to bite the bullet and get the printer and AMS separately. Thanks!
-
Inland Filament
Hello! Not sure if this is the right place for this, but just a feature request on the cardboard spools. Please add a hole on the side of the spool indicating approximately how much kg is left on the spool like many other companies are doing! Thank you! 😁
-
Creality K2 PLUS with CFS
Just as the official launch of the Creality K2 Plus was just released yesterday, @MicroCenterOfficial , Will you be providing stock for this item as you did with the rest of the Creality 3D printing products? I've purchased the BambuLab X1 Carbon with AMS from you guys as it has been exceptional since. Would appreciate if…
-
LW-PLA on Bambu X1C
I understand that the Inland LW-PLA filament is prefoamed. I was wondering what settings people are using to print with the LW-PLA. I am looking to print RC-Airplanes with my material, but I am having a time finding the correct settings to use. It appears most of the settings I have found are for active foaming filaments.
-
Bambu Lab A1 Combo Extruder Issue
I just purchased a Bambu lab A1 combo and just finished putting it together. This is my 3rd printer but first Bambu one. It ran through all the initial self-tests, and I got to the home screen and the printer kept giving me an error message: "The toolhead is malfunctioning please restart the device." I scanned the QR code…
-
Why is PLA+ no longer available online?
Hi all, I want to reorder more Inland PLA+ online and was disappointed to see it's no longer shippable. Why did Microcenter do this and do you plan to sell it online again anytime soon? Nearest Microcenter to me is a 4 hour round trip. I prefer Inland filament and would like to continue to use it if possible. Hoping for a…
-
Inland PLA+ (PLA Plus) Safety Data Sheet
Hi! Are there SDSs available for the various Inland PLA+ filaments? And are there differences between the spool-less refills and the spooled versions of the PLA+ Gray, or between the colors? I have Yellow, Blue, Light Blue, Gray, White, and Black. (If you can't tell, I'm a big fan of Inland PLA+ haha. They're probably my…
-
Any idea when the A1 will be back in stock?
With Bambu Lab having the refactored A1s back in stock for shipment now, any idea when Micro Center will have stock on hand to purchase as well?
-
A1 RECALL
I filled out the form with my A1 serial number and have heard nothing since. Are the heat beds coming soon?
-
Halot mage pro settings for inland water washable resin
I have had my halot mage pro for about a month now and my prints are ok but they could be better. I was wondering is there recomeded settings on the Halot mage pro for Inland water washable plus white resin? In particular I'm looking for print settings Thank you in advance
-
3d printer
3d priter broke do i need to buy a new one
-
Inland PETG filament quality
Hello,
