Consumer Tech — Micro Center

There is no button for resend receipt

mikemashchenko — Mon, 09 Mar 2026 18:56:30 +0000

Hello,

I’m trying to find the receipts for some purchases I made at Micro Center. I logged into my account and checked the Order History and FAQ, I see my orders, but there is no button send or email

Could you please help me locate the receipts or resend them to my email?

Thank you.

Looking for the Drivers for the Inland Gm-98

Catacombs — Wed, 31 Dec 2025 00:35:21 +0000

Recently bought the GM-98 and surprised to see the drivers for this mouse was included via a cd? I was instructed to ask around here for it hopefully

AM5 build won’t POST. No-RAM shows DRAM Q-LED, but any DDR5 installed = PSU click and dead

padams81 — Sat, 27 Dec 2025 18:04:58 +0000

Hey all - I’m stuck on a new AM5 build and I’m trying to figure out if this points to a bad motherboard vs PSU.

Parts: Ryzen 7 9800X3D,

ASUS TUF GAMING B650E-E WIFI,

Corsair RM1000x,

RTX 3080 (tested with and without),

Samsung 990 Pro 4TB,

32GB DDR5 (and I also tested a known-good DDR5 UDIMM from another PC).

Setup: board is on my desk (no case, and on the motherboard cardboard box), started by shorting PWR_SW pins. 24-pin ATX + CPU EPS 8-pin connected, CPU + cooler installed, one fan on CPU_FAN. Minimal config.

Behavior:

Standby power works (rear USB can charge phone)

With no RAM installed, board consistently shows yellow DRAM Q-LED (it knows that theres no memory in there)

With RAM installed (my kit or known-good DDR5), pressing power/shorting PWR_SW makes the PSU click but there are no LEDs, no fan twitch/spin, no Q-LEDs, nothing

Troubleshooting done: cleared CMOS multiple times, reseated CPU and inspected socket, tested single DIMM in A2/B2, tried known-good DDR5, updated BIOS via USB BIOS FlashBack (LED blinked then stopped)

Does this symptom pattern sound like a bad motherboard (memory power/init path), a PSU tripping, or something else I’m missing? Any last tests you’d recommend before I try to RMA the board or another component?

I did not receive my order

WildBlueMan — Sun, 24 Aug 2025 20:37:00 +0000

I did not receive my order Transaction Date:8/17/2025; Reference Number:081-WO-16523997. Who do I contact?

UCG-Fiber at Micro Center

whitewashed104 — Wed, 28 May 2025 02:45:04 +0000

Hello,

Will Micro Center eventually carry the Ubiquiti UCG-Fiber device?

I have a gift card I would like to use at Micro Center for this device, but I have not seen it in stock.

Adam

When will MC Stock the Ubiquiti UCG-Fiber Gateway??

newls1 — Wed, 16 Apr 2025 20:12:29 +0000

Been waiting months for MC to stock this and only buy all my hardware from you and now im tired of waiting!!! Anyone here might have an answer when you might sell/Stock this item?? Thank you

PC Build status update

elundor — Sun, 04 May 2025 17:11:08 +0000

Does anyone know how to get an update on your express build? I paid 250 for the build service, but I was not supplied a service order number, nor a contact number. I've received no contact from my store, this is in Patterson, NJ.

I AM FRUSTRATED. AND FELT LIKE A I BEEN MADE FUN OF.

manyinone — Sun, 16 Feb 2025 20:23:41 +0000

First of all i came to the store for advices, to buy a new notebook for work… specifically i needed one to have a thunderbolt ports… and since that is hard to know at first sight.. the tech that assisted me jumped and offered me one of the expensive notebooks wich by the USB-C port in the back .. claimed that it was a thunderbolt… i didn't know any better and whit out doubting his recommendations we proceeded with the order…. fast forwarding to the present time… (for personal reasons i had to pause my on going project there for I didn't use this notebook as a should have) i found out that this DELL ALIENWARE M15 R6 DOES NOT HAVE A THUNDERBOLT PORT. I'm hoping with this post that an EXECUTIVE SEES IT and could help me out .. i don't want to be on a lost of over a thousand dollars…. NOT FUNNY!!!

What do I do about high Hot Spot Temps?

PrettyTrash — Tue, 10 Dec 2024 09:26:24 +0000

I have a PowerColor Red Devil AMD Radeon RX 6800XT. I have had a few minor problems over the years with it, but it has been mostly an amazing graphics card. However, within the last 6 months, my pc has started completely crashing while playing somewhat demanding games, or doing too much multi-tasking. This started with CS2 shortly after I started playing it this year, but has since happened on other random games such as It Takes Two and Black Ops 6.

Most of the time it reboots automatically within a couple of seconds. Sometimes it is partially powered and does nothing when I press the power button. I end up having to toggle off the power supply, then back on and it will let me power on the rest of the pc.

The reason I pose the question is the graphics card's Hot Spot Temp, is because I started monitoring my components with my AMD monitoring app and noticed that during those demanding games, the hotspot exceeds 100 degrees C. It gets close to 110 but at that point, I'm not paying attention to the application and my computer crashes. Another factor to potentially consider is that I bought this 1000W PSU from the states, but I currently reside in Japan. The PSU states it can handle 100W 50Hz power, but my friend is adamant I should replace the PSU. Please give me any advice!

How do I cancel my order?

Benma924 — Mon, 20 Jan 2025 04:59:40 +0000

I misclicked and ended up clicking purchase when I was look at the price after tax because my mouse is so sensitive. I can't find the live chat to cancel my order.

Power Supply Issue

Dave44 — Thu, 02 Jan 2025 16:39:02 +0000

My PC won't power on. There is power coming in because if I press the button where the plug is I can get the fan to come on. Can anyone help me?

I have some questions on the services Microcenter may or may not provide.

Crouchjumper — Thu, 26 Dec 2024 05:59:22 +0000

Hi, I'm planning to make my way to Microcenter for the first time in the next few days, and I have a few questions. For one, I want to ask if they can install parts I buy in the store into the PC I plan to buy, and I want to know if they can transfer data between hard drives for a smooth transition to the new PC. Are these possible if I arrive with my old PC in tow?

3D PRINTERS

Camille1974 — Thu, 07 Nov 2024 22:26:02 +0000

I need two ender 3D printers put together, can your store do this?

ENDER 3 SD Card proper size?

Mvincent916 — Wed, 13 Nov 2024 14:53:37 +0000

Hello Community! I am wondering what size SD card is needed to insert in the Ender 3? Thanks!

Best USB or Thunderbolt portable ssd option

A_Feldman — Sat, 21 Sep 2024 19:04:55 +0000

Below is what I was thinking of using as a good portable ssd solution. For this price range. Is there a better idea? Is there one that would include a Thunderbolt port?

Crucial P3 Plus 1TB 3D NAND Flash PCIe Gen 4 x4 NVMe M.2 Internal SSD

$59.99

and

Sabrent M.2 SSD [NGFF] to USB 3.0 Aluminum Enclosure

$18.992 New in Stock

SKU: 788687

Replacement for WD Readyview NVR

dfelice — Thu, 01 Dec 2022 20:28:54 +0000

Now that both the WD Readyview NVR and Internet Explorer are no longer being supported, and the Readyview NVR can only be viewed by PC through Internet Explorer, I would like to replace the Readyview NVR with another brand that can be viewed on a PC by using any major browser. Can anyone suggest a replacement NVR that would be compatible with the Readyview 2MP and 4MP cameras?

MacBook Purchased From Microcenter Tustin LOCKED - Some Company Owns it Apparently!

dxfan227 — Thu, 18 Jul 2024 17:11:51 +0000

Purchased a MacBook Pro from microcenter in December 2023. Been using it without any issues since then. I have the receipt. Added AppleCare+ the whole nine yards..

Randomly today, I was met with " This Mac is owned by XYZ,Corp" and I cannot use the device. Apple says nothing that they can do from their end, the only thing I can try and do is reach out to the company to have them remove the lock? like what!? Why would microcenter sell me something like this?

Intel or AMD? I would argue AMD right now.

Karl612 — Mon, 13 May 2024 21:15:56 +0000

If anyone is looking at a new PC, I would strongly encourage you get an AM5 AMD system. Intel is changing sockets for the next gen desktop CPUs which means you will not be able to upgrade to new gens with a current gen motherboard. AM4 lasted 6 years ish, AM5 will give you plent of cheap upgrade options going forward, plus the X3D chips with the stacked/extra L3 cache are huge for 1080p and 1440p gaming.

Debug and module problems

tonyrcamp — Wed, 01 May 2024 22:54:13 +0000

My work is halted right now, because my module installations and updates keep freezing. When i try to open Juypter notebook on my labby it freezes and then a prompt comes up saying….— -xfrozen modules=off

When i input this, in all types of my command prompt it doesnt seems to understand what im writing.

How much do you charge to build my computer?

MyNameDiane — Tue, 26 Mar 2024 23:39:20 +0000

I have a saved parts list but we already have the parts. I just want it built for me. How much do you charge?

yes i made it water proof. other videos wont upload Raspberry pi 5

Kiodiekin — Wed, 06 Mar 2024 20:40:54 +0000

Can I get my receipt?

whereIsMyReceipt — Sat, 02 Mar 2024 05:08:13 +0000

Hello,

I made a purchase of a lenovo Leagen 5 pro in January. Along the computer, I bought a Eset protection plan. However, I couldn't find my receipt where the activition code is located. Can I get a copy of my receipt?

Asus monitor and Xbox 1

ARE2024 — Sat, 24 Feb 2024 15:28:01 +0000

Trying to connect Xbox one to Asus MZ27A Designo monitor. It says out of range. Is it a compatibility issue?

Inland Pro MK 67 Keyboard Bluetooth Latency / Lag

jp_in_ro — Mon, 08 Jan 2024 19:25:35 +0000

I love the Inland Pro MK 67K keyboard, but I've had a lot of issues with bluetooth connectivity and latency (it has ALWAYS been laggy). I have an Macbook Pro 2021 M1. I've also had issues where direct wired connection doesn't work, and also the using RF receiver needing to be unplugged and replugged back in for it to be recognized.

Maybe I got a lemon?

Update: I exchanged keyboard for another one (same model) and I had the same issue. I continued troubleshooting and discovered that when I turn off the backlighting on the Inland Pro MK67K keyboard, the typing lag disappears completely. Has anyone else experienced a similar issue? Other bluetooth keyboards with backlighting have not had this issue at all.

X real Air

TreBouncee — Sat, 30 Dec 2023 12:56:58 +0000

I just bought a pair of the X real air AR glasses. I'm enjoying them for on the go productivity while I'm editing or content consumption on the go. Has anyone else tried them?

Getting a red LED on MSI Tomahawk Z790

whitehat99 — Fri, 22 Dec 2023 00:01:54 +0000

swapped out processors. swapped out memory, still no boot and doesn't get to post screen. Is it a short or nvme or what. I am not a first timer. But I haven't seen this before

Can I still return a mouse when I replaced the feet with glass ones?

arandompcbuilder — Tue, 28 Nov 2023 00:42:07 +0000

I recently bought a pulsar x2h mouse from Microcenter, however, I am not satisfied with it and want to return it, but I have already switched out the stock feet for glass ones I also bought from Microcenter and the stock ones were damaged beyond repair. Will I still be able to return the mouse (or even the feet) despite the fact it would no longer have mouse feet?

My Build, looking for advice

Mojodjh — Fri, 24 Nov 2023 14:24:44 +0000

Background: first PC build ever, I am trying to play a fair amount of games in 4k with over 60 fps. With the 4090 out of stock everywhere I have some time to wait so I wanted to see what other more experienced people thought. In general, my questions are what am I going overkill on and what am I not putting enough into with this build? This is solely for gaming, no streaming or at home work currently so only working with one monitor currently. Money is not a huge issue although I would not like to go up more than what I currently have. I apologize if there is a spot for this I submitted my build elsewhere but it got rejected. Attached are 2 screenshots of my build parts. The thermal cooling is the kryonaut grease (didn't really know what to pick). One question I do have is I picked the air cooled build for 149.00 as opposed to the water AIO build. Is this an issue? Thanks for all the future feedback!

1.png

2.png

Does LG Slim Portable DVD Writer GP65NS60 work with Windows 11

pacliffe — Fri, 09 Dec 2022 17:42:31 +0000

Would this SSD be able to fit?

scan — Fri, 06 Oct 2023 20:31:41 +0000

I'm looking to replace the SSD in my Lenovo Thinkpad CarbonX1 Gen 9.

This was the SSD I was looking at, does anybody know if it would fit?

Also, it's currently on sale and I can't make it to my nearest microcenter for more than 3 days, does anyone know how long the sale will last?