-
PowerSpec CG237 Chassis
How to remove the side panel: Things you’ll need: Phillips screw driver (Sizes 0-2) Pull up on the handle on the back of the top panel to take the panel off. 2. Once the panel is off locate the screw holding the glass panel on and unscrew it. 3. Carefully pull up on the glass panel to take it off. 4. When putting the glass…
-
PowerSpec Dashboard
Greetings, This is our initial release: https://apps.microsoft.com/detail/9MT4RC4TPKMM Please provide your feedback on the UI and what you'd like to see. We plan to upgrade and improve this app over time.
-
Fortnite Crashing on AMD CPU's after 33.10
Greetings, This is an issue on the AGESA firmware p to 1.2.0.2A. If you are having this issue, let me know. We will get an updated BIOS out. G719: https://us.v-cdn.net/6031942/uploads/3ZL2KWQOKGJZ/b650m-c3-20-ms02.zip
-
PowerSpec PSU Selection - Manufacturer Recommendations
I'd like to discuss our power supply qualification process and how we decide if a PSU is adequate for a configuration. We measure power at the wall and on the system. When we qualify any PSU used on a PowerSpec, we run it, assuming it's gold rated, 10% above the rated output at the wall and we expect the PSU to survive…
-
Firmware Issues with WD NVMe drives and 24H2
Greetings, Be advised there is a known issue with some WD and Sandisk NVMe drives that can cause instability and OS corruption with the 24H2 update. See this article for more information: https://support-en.sandisk.com/app/answers/detailweb/a_id/51469 Impacted Drives and required firmware versions: WD_BLACK SN770 NVMe SSD…
-
PowerSpec BIOS - Intel Default Settings - 8/23
Greetings, In this thread we'll be providing BIOS updates for our Intel Z690/790 boards that provide the Intel Default Power Settings as an option in the BIOS. I'll list by board, rather than model and provide instructions on determining the board. What does these BIOS updates address? Premature degradation issues with the…
-
PowerSpec General Questions
Greetings, We'd like to hear your questions regarding our PowerSpec PC's. Please ask anything you would like. Pre-sales and post-sales. Questions about the testing and qualification process internally. Really, anything you would like and we'll answer as soon as possible. Our intent is to compile the data gathered into an…
-
PowerSpec Micro ATX 205 Chassis
How to install 2.5 SSD drive: Things you’ll need: SATA data cable Four M3 screws Phillips screw driver (Sizes 0-2) Make sure system is powered off before adding SSD Get the SATA data cable from the accessory kit Unscrew the two screws on the back-side panel and slide panel off Locate the SATA power cable that is connected…
-
PowerSpec BIOS Requests and Questions - AMD
Greetings, This a thread for our customers to request BIOS updates, or at least ask questions about BIOS updates and if new features may improve them system performance and reliability. Please post here with all questions and requests. We'll add the BIOS updates to this thread as they become available.
-
PowerSpec BIOS Requests and Questions - Intel
Greetings, This a thread for our customers to request BIOS updates, or at least ask questions about BIOS updates and if new features may improve them system performance and reliability. Please post here with all questions and requests. We'll add the BIOS updates to this thread as they become available.
-
PowerSpec ATX 206 Chassis
Greetings, This is a guide explaining the chassis buttons. Power – This button turns the system on. If you hold the power button it will turn the system off Inner Ring – Inner RGB ring Color – This button cycles through the colors for the inner ring on the case fans Mode – This button cycles through the inner ring fan…
-
PowerSpec ATX 205 Chassis
Greetings, This is a guide explaining the chassis buttons. Power – This button turns the system on. If you hold the power button it will turn the system off Color – This button cycles through the colors for the case fans Mode – This button cycles through the fan effects How to install 2.5 SSD drive: Things you’ll need: ·…
-
Attention: PowerSpec G516 (& Other Radeon RX 6000 Series Systems) GPU Driver Issue
We've received reports from some users that their PowerSpec G516 does not wake from sleep using certain monitor configurations. While we have not been able to replicate this in our lab, we have found plenty of reports online that seem to point towards a GPU driver issue on the Radeon Adrenaline drivers from version 23 and…
-
Attention: PowerSpec G714 - Potential Instability
Greetings, Some users have reported experiencing memory instability on their PowerSpec G714. We have determined this to be a memory controller binning issue that effects a relatively small number of the 7800X3D processors used on this system. The issue stems from the VDDP voltage set when the XMP is loaded. We have…
-
PowerSpec AM5 - AGESA 1.0.0.7b+ (Optional)
Greetings, The AGESA 1.0.0.7b is showing substantial improvements in memory compatibility and we've been able to push much higher frequencies than previously such as 7200+ in certain configurations with manual overclocking. We're going to work through our AM5 boards and offer optional BIOS updates that include this AGESA…
-
MSI Motherboard Bios Update Issue
I need to update my MSI BIOS and I download the file off of MSI's site to do that but when I go into the BIOS and update, and reboot into the M-Flash update utility it doesn't see the file I downloaded. I have the MAG x870E Tomahawk wifi board and the serial number starts with 07e5920.. so it seems like I had the correct…
-
power spec g707 (older model no longer sold) keeps making strange noise on start up
Hello recently my powerspec g707 has started making this strange revving like noise on start up. It happens for several seconds and after a bit stops. Then its fine for the rest of the time it's on. The stranger thing is that I can't seem to replicate it consistently. Usually only happens when turning on my PC for the…
-
PowerSpec G527 RGB Issues
Editing original post as I performed a system restore to get Mystic Light Lite back. Hi, I recently purchased a PowerSpec G527 and it came with Mystic Light Lite which is not working when I want to change my RGB settings. Currently only the CPU fan RGB is on and looks like it's at the default setting (rainbow). The front…
-
Msi x870e tomahawk
Seems I am having and issue with the x16 graohics card slot not runing at gen 5 on this board. Runs at @x16 1.1. I updated the bios from the shipped A02 bios to newest one from msi. I am requesting the A02 bios for the g914 with msi x870e tomahawk to roll back and see if that fixed the x16 slot speed. Please send Thanks
-
PowerSpec G911 - Request For Updated BIOS & BSOD Question
Hey PowerSpec, 1. Is there an updated BIOS for the G911? I haven't seen an update for it in a while. I have been using the MSI BIOS update but I just read about that PowerSpec computers are not supposed to be using that? 2. I've also been getting the DRIVER POWER STATE FAILURE BSOD since I've had the computer. I'll post a…
-
Powerspec G760 - How to sync fan ARGB with RAM ARGB?
Hello, All ARGB was in sync out of the box, but after playing around with the BIOS Aura settings (Stealth mode, Aura only, etc.) they are no longer in sync. Only the fans are in sync and the RAM is not lit up. I've also installed the g. skill trident software to turn on RAM ARGB but it is not in sync with ARGB. Is there…
-
PowerSpec G914 Software Issue
Hey, I think I posted this in the wrong section yesterday, sorry about that! I recently purchased a PowerSpec G914 and it came with a standalone / OEM version of the Mystic Light Lite app which was very efficient and worked perfectly! After doing a fresh install of windows, I realized I couldn’t find a link to the…
-
PowerSpec G442 Top Panel USB-C Port Specs?
I bought my G442 back in 2023. The top panel has 2 x USB 3.1 (Gen 1 Type-A) ports, and a USB-C port. The system specs that I saved a webpage screenshot of doesn't mention this port at all. I do know the motherboard back panel features a red USB 3.2 (Gen 2 10GB Typе-А) and a USB 3.2 (Gen 2x2 20GB Type C) ports. But what are…
-
How do I create recovery media for PowerSpec G457
I want to make recovery medium for my new PowerSpec G457 that was built on 12/12/2025. I think if I jsut make a Windows recovery medium I might now have all the drivers for the motherboard and graphics card and lighting. I don't want to make a system image since I am logged in with an account, and it has my files on it.…
-
Issues with Fan Lights
Hello, I recently purchased a prebuilt PowerSpec G757 (98X3D/32/2/5080/H) and have been loving it so far. I’m not very experienced with the physical setup of PCs, but I’ve run into a persistent lighting issue. When I first bought the system a couple of months ago, the three fan RGB lights worked perfectly and I was able to…
-
PowerSpec Gaming Laptop Freezes/Restarts When Plugging in External Monitor
Hi everyone. This is my first post, Im new to the forum. Ive been researching this issue for a couple weeks and cant seem to find a fix. When I plug in an HDMI external monitor or television the laptop will see it and run it fine for a few minutes. As soon as I move an app to the monitor it starts freezing and after about…
-
pc crashing
Hello i hope all of ya are doing okay so look i bought a powerspec pc at first it never crashed never had any problems took it to get the ssd replaced and ever since that my pc has been crashing and freezing on fortnite and roblox i can be on fortnite and my whole pc just freezes can't even move the cursor or nothing…
-
PowerSpec G757 9800X3D very hot
Hi, I purchased my G757 in November 2025. I have been playing Path of Exile 2 recently, and I have noticed my 9800X3D gets very hot while playing PoE2. Today it hit a max of 92.8C. Is this normal? It seems quite high. Is there any way to lower the temperature? The case fans are also working very hard, and the PC is very…
-
Device Driver for G913: questions, issues, and solutions
With the large number of posts I'm seeing across numerous forums, for Device drivers people can't find, I'm starting a topic for requesting and posting driver issues that have proven difficult to resolve. So whether you're having issues with a system-build, a device you've upgraded or added to your system, or have recently…
-
PowerSpec G728 won’t let me play steam games without pop ups
Over the holiday break, I decided to buy a prebuilt desktop PC from Micro Center because my gaming laptop was starting to feel outdated. It overheated often, slowed down during games, and could not keep up with newer titles. I was excited to finally upgrade to a stronger system that could handle gaming without constant…
-
updated bios for powerspec G482
Hi, Currently on my G482 (I 285K/5090) powerspec workstation using it's original BIOS F9c. I am trying to fix some noise Linux is complaining about related to ACPI while booting. I tried to update to F18 from gigabyte but got an error of "OemId Mismatch" from the Q-Flash and booting and running flash from a USB stick went…
-
New G758 Freezes with high bandwidth
G758 Purchased on Saturday 12/20. Soon after setting up Windows 11, I tried to run a speed test in Edge. About 3 seconds in the screen freezes and is completely unresponsive. Only a hard boot will fix. Since then, I’ve tried speed tests in Chrome to the same result. And have had it freeze soon after starting a Twitch…
-
Need help with PowerSpec G729 RAM running at 4800
How can I get my RAM to run at 6000?
-
Asrock b450m/ac Bios update, Powerspec G163
Hello, I've recently purchased a Ryzen 7 5700x, upgrading from Ryzen 5 3600, and Id liked to update my bios prior to installing. My instant flash option wont work no matter what I do when downloading the bios files from asrock. My prebuilt was a powerspec G163 purchased in 2020, is there a bios file from powerspec that…
-
PowerSpec B737 SSD
I purchased a B737, at the same time the technician sold me a 2TB SSD (SATA) to replace an older data drive I had on my previous computer. Along with the SSD he sold me a cable to connect the drive to the mother board. Where do I plug this into the mother board? I don't see a SATA power cable coming from the power supply.
-
PowerSpec G365: Updating Drivers for Windows 11 24H2 Update
Hi. I bought my PowerSpec G365 a few years back. Said machine is on Windows 11 Pro 23H2, and I would like to update all of the necessary drivers so I can update my system to 24H2. I've already updated my graphics driver, but I have some questions about what else I need to do. I've been to my product site…
-
Location for Downloads and Support for PowerSpec G484
Where is the location for support and downloads (e.g. BIOS, drivers) for the PowerSpec G484? I don't see that model listed here, and the PowerSpec dashboard reports "Model is not currently supported, please let us know and we'll add it."
-
PowerSpec G759 Led buttons on top on case don't do anything
I just purchased a G759 powerspec computer and the 4 led buttons don't do anything to control the led fan lighting. I am wondering if they forgot to attach the led controller buttons to the motherboard? I downloaded a program from ASrock called ASRRGBLED which does control the fan led lights.
-
Powerspec G527 frequent Hard crash / reboots
There was an error rendering this rich post.
-
"Not supported" items.
My motherboard and gpu are not supported. I'd like to know if this is causing the error screens im seeing costantly on my brand new prebuilt.
-
Powerspec G472 windows disk errors
I have tried replacing m.2 as well as using sata drive and they immediately report disk errors in windows. Driver updates have been applied. Any idea how to resolve this?
-
Powerspec g914 Bluetooth not working
I have tried using Bluetooth and it is not working, I have tried updating it but it says no suitable drivers. Looked for it in device manager and it’s not in there. Checked my antenna and it’s connected it just snaps in. Any chance some one had the same issue how did you fix it?
-
How to make Num Lock on by default on bootup?
I recently bought a Powerspec B736 with Win 11 Pro and can't get Num Lock to be permanently on at bootup. I've tried RegEdit, and tried a VBS script that only seemed to toggle the Num Lock, not keep it on. My keyboard has a number pad and I use it often, so I really don't want to have to enable Num Lock each time. Can…
-
replacement cables for power spec power supply
I Purchased a power spec power supply a year ago open box But it didn't have the 16 pin gpu cable At the time I didn't mind it because my GPU didn't use it but I just upgraded it and now I need it is there any way I can purchase the cable that i need
-
Powerspec G757 Noise Questions
I recently purchased a powerspec g757. When I put the PC to sleep, I always hear an audible "click" or "switch" noise. Is this normal? Also, whenever I try to switch my fan curve to "manual" on the Gigabyte Control Center, it has an audible coil whine like sound. The noise goes away once I switch it back to the "silent"…
