-
CAN-BUS Shield
(blue and Eco-friendly) Introduction: CAN-BUS Shield is particularly designed for Arduino controllers. The onboard MCP2515 control chip can realize the data control on the CAN bus and data communication between devices. It is compatible with the Arduino UNO standard interface; can be perfectly adapted to the main control…
-
Breadboard Power Module+400-Hole Solderless Breadboard+65 Jumper Wires Package
Introduction This package includes a 830-hole breadboard, a breadboard power module and breadboard jumper wire pack of 65. You can freely add other components on the breadboard to design your own circuit. breadboard power module is compatible with 5V and 3.3V, suitable for MB102 breadboard. This module includes dual…
-
Inland 1.3" 128x64 OLED Graphic Display
Introduction OLED is short for organic light emitting diode. On the microscopic level, an OLED display is a matrix of organic LEDs that light up when they emit energy. Old LCD (Liquid Crystal Display) technology uses electronically controlled polarizers to change the way light passes or does not pass through them. This…
-
Inland 3D Printer DRV8825 Kit (5PCS)
Introduction: This stepper motor driver is powered by DRV8825. This driver has a same pin and interface as our A4988 stepper motor driver, so it can replace the A4988 driver. It is a high-powered stepper motor driver. DRV8825 has adjustable current limits, over-current and over-heat protection, six micro resolution (down…
-
Inland Special power module for bread board
Introduction This breadboard power supply module is compatible with 5V and 3.3V, which can be applied to MB102 breadboard. The module contains two channels of independent control, powered by the USB all the way. + The output voltage is constant for the DC5V, and another way is powered by DC6.5-12V, output controlled by the…
-
inland 3D 12864 LCD screen blue
Description This is a 3D 12864 LCD screen intelligent controller; When in use, two FC cables are used to connect the intelligent controller with the ramps 1.4 motherboard. board and connect the smart controller to the RAMPS 1.4 main board with two FC cables. Pay attention please to connection that EXP1 of smart controller…
-
Rotary Encoder Module
Introduction The rotary encoder can count the pulse outputting times during the process of rotation in positive and reverse direction by rotating. This rotating counting is unlimited, not like potential counting. It can be restored to initial state to count from 0. Specification l Power Supply: 5V l Interface: Digital…
-
1m/3m/5m 60 LEDs – LED Strip
Main Features ● Intelligent reverse connection protection, the power supply reverse connection will not damage the IC. ● The IC control circuit uses a power source with the LED point light source. ● The control circuit is integrated with the RGB chip in a 5050 package element, forming a complete external control pixel…
-
PIR Motion Sensor
Description: The Pyroelectric infrared motion sensor can detect infrared signals from a moving person or moving animal, and output switching signals. It can be applied to a variety of occasions to detect the movement of human body. Conventional pyroelectric infrared sensors are much more bigger, with complex circuit and…
-
LM2596S-ADJ DC-DC Adjustable Step-down Voltage Regulator Power Module
Description This is a general DC-DC power supply module, which mainly uses the LM2596S-ADJ chip and can step down and regulate voltage. When using it, we only need to input the corresponding voltage at the IN+ (positive) and IN- (negative) terminals, and then the corresponding output voltage can be obtained at the OUT+…
