-
Inland RPI TFT 3.5" LCD Touchscreen Shield
Inland RPI TFT 3.5" LCD Touchscreen Shield Introduction It is the cutest, little display for the Raspberry Pi. It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay. It supports any revision of Raspberry Pi (directly-pluggable). Description Connection Diagram This will have to be the…
-
Inland 1602 I2C Module
1602 I2C Module Introduction 1602 I2C module is a 16 character by 2 line LCD display with Blue background and White backlight. The original 1602 LCD needs 7 IO ports to be up and running, but ours is built with Arduino IIC/I2C interface, saving you 5 IO ports. This LCD is ready-to-use because it is compatible with the…
-
Inland CCS811 Carbon Dioxide/Air Quality Sensor
Inland CCS811 Carbon Dioxide/Air Quality Sensor Description CCS811 carbon dioxide/air quality sensor mainly uses the CCS811 chip. It is an ultra-low-power miniature digital gas sensor that can detect a wide range of volatile organic compounds (TVOCs), including equivalent carbon dioxide (eCO2) and metal oxide (MOX) levels.…
-
Inland CAN-BUS Shield (blue and Eco-friendly)
CAN-BUS Shield (blue and Eco-friendly) Introduction: CAN-BUS Shield is particularly designed for Arduino controllers. The onboard MCP2515 control chip can realize the data control on the CAN bus and data communication between devices. It is compatible with the Arduino UNO standard interface; can be perfectly adapted to the…
-
Inland LCD1602 Expansion Shield
Introduction The LCD shield integrates 1602 LCD display and six buttons into one piece, which is fully compatible with UNO R3 control board. It is very simple and convenient for you to stack it onto UNO board. There are two communication methods for 1602 LCD display and UNO R3 board, separately the 8-Bit connection and…
-
Inland 4-channel Relay Module
Introduction Relay Shield employs high quality relay with four channels input and output. It can be connected to 250V/10A AC element or 24V/10A DC element to the maximum, therefore, it can be used to control lights, motors, etc. The modularized design makes it easy to connect to Arduino expansion board. The output state of…
-
Inland UNO R3 Main Control Board
Inland UNO R3 Main Control Board Introduction: Inland UNO R3 Main Control Board is a microcontroller board based on the ATmega328P datasheet, fully compatible with ARDUINO UNO REV3. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a…
-
Inland ESP32-IO Shield (Black and Eco-friendly)
Inland ESP32-IO Shield (Black and Eco-friendly) Introduction The ESP32-IO shield is compatible with the ESP32 Core board. It expanses the pins of ESP32 core board with the 2.54mm pin headers. It also has two rows of pin headers for connecting sensors and modules. In addition, to supply power for ESP32 board, you only need…
-
Inland NANO Shield (Blue and Eco-friendly)
Inland NANO Shield (Blue and Eco-friendly) Overview Nano is a tiny control board based on Arduino platform, which is deeply popular. However, if want to connect several sensor modules to Nano , and connect external power, we need to use breadboard and a bunch of jumper wires, which is pretty inconvenient. We specially…
-
Inland Breadboard Power Module+400-Hole Solderless Breadboard+65 Jumper Wires Package
Inland Breadboard Power Module+400-Hole Solderless Breadboard+65 Jumper Wires Package Introduction This package includes a 830-hole breadboard, a breadboard power module and breadboard jumper wire pack of 65. You can freely add other components on the breadboard to design your own circuit. Breadboard power module is…
