Inland UNO PLUS Development Board Contents 1. Description 2. Specification 3. Interfaces Description 4. Specialized Functions of Some Pins 5. Install Arduino IDE and Driver 5.1 Download the Arduino IDE 5.2 Installing driver 5.3 Arduino IDE Setting 5.4 Start first program 6. MAC System 6.1 Install Arduino IDE on MAC System…
Inland 3D LCD screen blue Description This is a 3D 12864 LCD screen intelligent controller; When in use, two FC cables are used to connect the intelligent controller with the ramps 1.4 motherboard. Board and connect the smart controller to the RAMPS 1.4 main board with two FC cables. Pay attention please to connection that…
Inland HM-10 Bluetooth-4.0 V3 Compatible with HC-06 Pins Description Bluetooth technology is a wireless standard technology that enables short-distance data exchange between fixed devices, mobile devices, and building personal area networks (using UHF radio waves in the ISM band of 2.4 to 2.485 GHz). The inland HM-10…
Inland Special Power Module for Bread Board Introduction This breadboard power supply module is compatible with 5V and 3.3V, which can be applied to MB102 breadboard. The module contains two channels of independent control, powered by the USB all the way. The output voltage is constant for the DC5V, and another way is…
PRO MICRO 5V 16MHZ Development Board Content 1. Description 2. Specification 3. Pin Interfaces 4. Specialized Functions of Pins 5. Download the Arduino IDE Step 1 Installing Driver Step 2 Set Boards Manager Step 3 Arduino IDE Setting 4 Hello World! 6. Package List 1. Description The processor core of Keyestudio PRO MICRO…
Inland ESP32 Core Board (Black and Eco-friendly) Content Guide Description Technical Details Element and Interfaces Detailed Using Method as follows Step 1 | Install the Arduino IDE Step 2 | Installing the Driver Step 3 | Building ESP32 Environment Step 4 | Arduino IDE Setting and Toolbar Step 5 | Upload the Code Resource…
Inland Arduino Compatible Basic Starter kit Attached below is a .PDF that will walk you through some great projects for all the different components that are included in this kit. Here are some examples of what projects are featured! Flame sensor LED chasing effect Traffic light Pulse width modulation (PWM) Blinking LED…
Inland RPI TFT 3.5" LCD Touchscreen Shield Introduction It is the cutest, little display for the Raspberry Pi. It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay. It supports any revision of Raspberry Pi (directly-pluggable). Description Connection Diagram This will have to be the…
1602 I2C Module Introduction 1602 I2C module is a 16 character by 2 line LCD display with Blue background and White backlight. The original 1602 LCD needs 7 IO ports to be up and running, but ours is built with Arduino IIC/I2C interface, saving you 5 IO ports. This LCD is ready-to-use because it is compatible with the…
Inland CCS811 Carbon Dioxide/Air Quality Sensor Description CCS811 carbon dioxide/air quality sensor mainly uses the CCS811 chip. It is an ultra-low-power miniature digital gas sensor that can detect a wide range of volatile organic compounds (TVOCs), including equivalent carbon dioxide (eCO2) and metal oxide (MOX) levels.…