-
Need help picking the right parts.
Hello, I am working on a gaming PC build. I need some advice as to which products I should be looking at. I only play competitive shooters, like Modern Warfare and Halo. I plan on only using this PC for gaming and nothing else. I would like to play games at 1440 p at 144 hz. I have already purchased the below. If you could…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. Looking for it to be a medium gaming/ editing pc and wondered if the parts selected would be ok. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=71f03215-9e03-4c41-9a4d-9280c671069d
-
Is this a decent entry level build?
Hi, looking for advice, even though not all of the parts are at the microcenter. Would you change anything? Trying to keep it under $1100. TIA! AMD Ryzen 5 3600 MSI MAG B550 TOMAHAWK ATX AM4 Motherboard Team T-Force Delta RGB 16 GB (2 x 8 GB) DDR4-3200 CL16
Memory Western Digital Blue SN550 1 TB M.2-2280 NVME Solid…
-
Need Help Choosing Parts
I'm looking for some feedback on this machine. This will be the first build I've done in over 20 years, and looking forward to getting back into it. I'm looking for longevity, and upgradability down the line though I think with this build I won't need to worry about it for a long time to come. Thanks!…
-
Need Help Choosing Parts for a video editor (no 4K)
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=b129aaeb-c1e0-4f56-9af3-d4e8cc7ba3ce
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=11868eea-3828-4a36-b91f-ae4c7c393c57
-
YouTube Live Streaming Dedicated PC
hello, I was just curious, what is your opinion on this issue? I am trying to live stream pre-recorded 3 minute videos. I use Open Broadcast Software to loop the video for hours. but the video itself is about 3-4 minutes long. I was just curious what would you recommend as far as hardware like what kind of computer…
-
PC Building Question
I plan to go to a local Micro Center to help choose parts for them to build a PC. However, given the difficulty of finding the right video card I plan to reserve it online and buy it first and then go in. That should be the hardest part to get, correct? With that in mind, will the name in front of the video card (same…
-
First pc build
Well I am new to building a PC. I do have a current PC which is an HP pavilion which is a dinosaur and I’m toying with the idea of using parts from that. The parts that I would use would be the storage which has a 1 TB hard drive the memory but I don’t know the manufacture but it is 2x8 gb sticks and the Optical drive. I…
-
Need Help Choosing Parts
I put this parts list together (I am a beginner) and am looking for some advice. My use for this build is for game design and gaming https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=6040eb66-06a8-4503-af75-fa05bd8b79c6
-
General Home Desktop Parts
Hi all, I am working on picking out parts to use for an everyday desktop. There won't be much games ever played on it, more working on documents and online teaching. Here are the parts I currently have picked out: CPU: i5-9600K Fan: Noctua NH-L9i Motherboard: ASUS B360 PRIME Memory: 2x8 GB G. Skill Ripjaws 5 Case: Lian Li…
-
First Build
This is going to be my first computer that I have built and a friend has helped me get started by gifting me a RTX 2060 to get started. I have about $1000 for everything else but I do not know where to really start. I am hoping to play racing sim games because after I build the pc I am going to get a wheel for it, and I…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=c394b5d5-bd08-43c9-9751-69ca21c5aafc
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. Is it good? https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=db972bd3-411f-4f96-8b84-923b380fd8d0
-
Need Help Choosing Parts
I'm trying to build a gaming pc for around $1,000 and need help choosing the parts
-
Help w/ 1st build MoBo
I have received a Ryzen 5 3600 CPU as a basis for my 1st build. I will be targeting $1000 - $1250 for the budget (computer only). I will primarily be using it to game. I play Destiny and will soon complete most of it's story line. I will then move to CoD WWII. I currently play via PS 4 & I'm very much looking fwd to PC…
-
hello guys, I'm building my first computer and I need tips and ideas and help regarding setting up
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=122daa54-d208-4484-baff-74693c9b79f7
-
Need Help Choosing Parts
I'm new to building computers and I don't have a very big budget about $700. I was just wondering if someone out there could help me make this build cheaper or if there are any unnecessary parts that I could remove to make it cheaper.…
-
Need Help Choosing Parts
.Hey guys and Merry Christmas! So i want to build a pc mostly for coding...and for personal use, I'm not really into games, for the moment at least...I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=93332111-dfd4-422c-a080-689b3dc3f610
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=74d60b02-ecab-4694-ba6c-2c86e4a9424e
-
2000 Dollar Build?
I am looking for a Gaming Build for me to build for my cousins Birthday on Feb 1. With the 3700x / 5600x, and a 3070, which I also need help picking. He just does gaming. He gave me 2000 dollars to work with, and wants quite a bit of RGB. (Edited) - He wants an AIO for his PC, because he is doing 3D design. A 240-360 mil…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-intel.aspx?load=e3beff8e-31eb-4b03-b96c-0d577d03764f
-
Workstation for 3-D Design and Rendering
Here's the build I'm considering: https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=81754fda-1306-44be-aca7-69d91c75db95 Base Program Requirements - Specifications Reference Developers Website: These are the most taxing programs I'd run on this workstation. Lumion10: * A GPU scoring a G3DMark of…
-
Need help building a mini pc tower
Hello, I need help to build a mini pc tower, I built a pc at micro center at the beginning of this year, but it was a mid-tower. I want to know if these components will fit in a mini pc and also what mini pc tower can you recommend to me. My current pc parts are the following: If you want to change something, I am open to…
-
Architecture Workstation
Hello all. This is my first attempt at building a workstation for myself. I dabble in gaming but this is by far a machine for process data intensive programs. I know I'll need a powerful CPU and GPU to run programs like Rhino6 w/Grasshopper, Revit w/Dynamo, Autocad, Adobe Photoshop, Illustrator, Indesign, Lumion, V-Ray.…
-
Will microcenter trade/buy a brand new item I have?
I got a brand new mother still in the box, but I dont need it now. Will micro center trade it for other items/credit or buy it?
-
Need help. First time PC build!
I want to build a gaming pc, but I have little to no knowledge on the subject. I will also use this computer for my everyday life (work, browsing, etc.). I'm doing my best to research and learn but wanted to reach out to the professionals. My budget is around $500-$700; I'm looking for something basic and simple that will…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=e8846707-906c-4b8b-a70e-9726c1d16b39
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-intel.aspx?load=0e8c46a4-e2b3-4eb2-80aa-a11eb6b618c8
-
Beginner build
I put this build together for my 1st PC and was wanting to get some tips on possibly reducing cost and if this is a pretty coherent build. Thanks https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=3fcf18bc-155c-4654-a27b-158f22f143ed
