New Owner Questions

TubigLung
TubigLung ✭
First Comment Name Dropper
in PowerSpec

I recently purchased a Powerspec B737 to replace a 2011 Dell PC. After about a month of usage, I had some general questions:

  • Noticed that while browsing or using MS Office (otherwise minimal multi-tasking), the fans ramp up and down quickly (probably no more than 5s at the most) every now and then. The ramp ups don't seem to coincide with any particular increase in activity on my end. Is this normal behavior? Have heard this might be something with AMD processors?
  • In the Gigabyte Control Center, it lists several updates (including things like Norton antivirus). Any recommendations on if, or which, items I should prioritize updating? I know sometimes newer isn't necessary better as updates can introduce their own set of issues.
  • Trying to figure out what the below mesh-like material is. It's towards the front of the tower and runs pretty much from the top (behind the fan in the picture) to the bottom (blue outline). If it's some sort of dust cover/filter, is there an easy way to remove it for cleaning? 20250521_154227.jpg
· Share on FacebookShare on Twitter

Best Answers

  • PowerSpec_MikeW
    PowerSpec_MikeW PowerSpec Engineer
    Sixth Anniversary 2500 Comments 100 Answers 250 Likes
    Answer ✓

    @TubigLung

    • It's typical with background usage. Temp increases will cause this, the fan curves can be adjusted in the BIOS or GCC.
    • You don't need to touch the updates, it's just part of GCC. We push the drivers out automatically via Windows Update.
    • If you grip at the bottom front, you can pull the front bezel off entirely. The dust filter is under there. It's magnetic
    · Share on FacebookShare on Twitter
  • PowerSpec_MikeW
    PowerSpec_MikeW PowerSpec Engineer
    Sixth Anniversary 2500 Comments 100 Answers 250 Likes
    Answer ✓

    @TubigLung

    Only if the noise is annoying to you. You can flatten it out a bit.

    Yes, if you stick your hand under there, there's basically a hand hold you can grip. Just pull it towards the front and it'll pop off. They're plastic clips, it does require some force.

    · Share on FacebookShare on Twitter

Answers

  • TubigLung
    TubigLung ✭
    First Comment Name Dropper

    Thanks @PowerSpec_MikeW! Glad to hear the drivers are pushed automatically — one less thing to worry about.

    For a normal user, is there anything with the fan curves I would need to consider adjusting?

    By bottom front, I'm assuming you're referring to the small opening that's sort of behind the PowerSpec logo at the bottom front of the tower? Is that front bezel held in place via clips (just wondering how much force I would need to exert) or does it slide right off?

    · Share on FacebookShare on Twitter
  • TubigLung
    TubigLung ✭
    First Comment Name Dropper

    How do I get into BIOS? I tried pressing DEL when the PowerSpec splash screen loads up but it just goes straight into booting up Windows.

    · Share on FacebookShare on Twitter
  • PowerSpec_MikeW
    PowerSpec_MikeW PowerSpec Engineer
    Sixth Anniversary 2500 Comments 100 Answers 250 Likes

    @TubigLung

    That's the correct key. It may not be detecting your keyboard quick enough. From Windows:

    1. Right click start, select Terminal (Admin)
    2. Hit 'Yes' in the UAC box.
    3. Type: shutdown /r /fw /t 00
    4. If you see an error type the same command again.

    That will reboot and automatically enter the BIOS.

    · Share on FacebookShare on Twitter
  • TubigLung
    TubigLung ✭
    First Comment Name Dropper

    I gave it a few more tries and think I might have gotten it to work via the DEL key. I was pressing it when I saw the PowerSpec splash screen but every time I did that, it would just boot up to Windows. The one time it worked was when I started pressing the DEL key before I even saw the splash screen; once that screen came up, it blinked and brought me into BIOS.

    · Share on FacebookShare on Twitter
  • PowerSpec_MikeW
    PowerSpec_MikeW PowerSpec Engineer
    Sixth Anniversary 2500 Comments 100 Answers 250 Likes

    @TubigLung

    Yes, I would always spam the key after I turn the system on. There may be enough of a delay with the monitor to have missed the window by the time you see the splash.

    · Share on FacebookShare on Twitter

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories

We love seeing what our customers build

Submit photos and a description of your PC to our build showcase

Submit Now
Looking for a little inspiration?

See other custom PC builds and get some ideas for what can be done

View Build Showcase
View builds by:

SAME DAY CUSTOM BUILD SERVICE

If You Can Dream it, We Can Build it.

Services starting at $149.99

More Details

Micro Center Homepage

Service, Upgrades & Repairs