Consumer Tech

I have upgraded the GPU to a 5070TI & have 32 gb of ram. This prebuilt has the 5600x CPU & I get stutters in some games. I've read that the 5600X3d would probably fix it. I'm under the impression I need to update the BIOS version. What BIOS version do I need? I currently have version P1.40b.

Recently purchased the Inland Glass Top Gaming Desk. SKU:971465 Desk didn't come with any build instructions and there is no documentation online. Anyone able to help?

Hello, I’m trying to find the receipts for some purchases I made at Micro Center. I logged into my account and checked the Order History and FAQ, I see my orders, but there is no button send or email Could you please help me locate the receipts or resend them to my email? Thank you.

Recently bought the GM-98 and surprised to see the drivers for this mouse was included via a cd? I was instructed to ask around here for it hopefully

Hey all - I’m stuck on a new AM5 build and I’m trying to figure out if this points to a bad motherboard vs PSU. Parts: Ryzen 7 9800X3D, ASUS TUF GAMING B650E-E WIFI, Corsair RM1000x, RTX 3080 (tested with and without), Samsung 990 Pro 4TB, 32GB DDR5 (and I also tested a known-good DDR5 UDIMM from another PC). Setup: board…

I did not receive my order Transaction Date:8/17/2025; Reference Number:081-WO-16523997. Who do I contact?

Hello, Will Micro Center eventually carry the Ubiquiti UCG-Fiber device? I have a gift card I would like to use at Micro Center for this device, but I have not seen it in stock. Adam

Been waiting months for MC to stock this and only buy all my hardware from you and now im tired of waiting!!! Anyone here might have an answer when you might sell/Stock this item?? Thank you

Does anyone know how to get an update on your express build? I paid 250 for the build service, but I was not supplied a service order number, nor a contact number. I've received no contact from my store, this is in Patterson, NJ.

First of all i came to the store for advices, to buy a new notebook for work… specifically i needed one to have a thunderbolt ports… and since that is hard to know at first sight.. the tech that assisted me jumped and offered me one of the expensive notebooks wich by the USB-C port in the back .. claimed that it was a…

I have a PowerColor Red Devil AMD Radeon RX 6800XT. I have had a few minor problems over the years with it, but it has been mostly an amazing graphics card. However, within the last 6 months, my pc has started completely crashing while playing somewhat demanding games, or doing too much multi-tasking. This started with CS2…

I misclicked and ended up clicking purchase when I was look at the price after tax because my mouse is so sensitive. I can't find the live chat to cancel my order.

My PC won't power on. There is power coming in because if I press the button where the plug is I can get the fan to come on. Can anyone help me?

Hi, I'm planning to make my way to Microcenter for the first time in the next few days, and I have a few questions. For one, I want to ask if they can install parts I buy in the store into the PC I plan to buy, and I want to know if they can transfer data between hard drives for a smooth transition to the new PC. Are these…

I need two ender 3D printers put together, can your store do this?

Hello Community! I am wondering what size SD card is needed to insert in the Ender 3? Thanks!

Below is what I was thinking of using as a good portable ssd solution. For this price range. Is there a better idea? Is there one that would include a Thunderbolt port? Crucial P3 Plus 1TB 3D NAND Flash PCIe Gen 4 x4 NVMe M.2 Internal SSD $59.99 and Sabrent M.2 SSD [NGFF] to USB 3.0 Aluminum Enclosure $18.992 New in Stock…

Now that both the WD Readyview NVR and Internet Explorer are no longer being supported, and the Readyview NVR can only be viewed by PC through Internet Explorer, I would like to replace the Readyview NVR with another brand that can be viewed on a PC by using any major browser. Can anyone suggest a replacement NVR that…

Purchased a MacBook Pro from microcenter in December 2023. Been using it without any issues since then. I have the receipt. Added AppleCare+ the whole nine yards.. Randomly today, I was met with " This Mac is owned by XYZ,Corp" and I cannot use the device. Apple says nothing that they can do from their end, the only thing…

If anyone is looking at a new PC, I would strongly encourage you get an AM5 AMD system. Intel is changing sockets for the next gen desktop CPUs which means you will not be able to upgrade to new gens with a current gen motherboard. AM4 lasted 6 years ish, AM5 will give you plent of cheap upgrade options going forward, plus…

My work is halted right now, because my module installations and updates keep freezing. When i try to open Juypter notebook on my labby it freezes and then a prompt comes up saying….— -xfrozen modules=off When i input this, in all types of my command prompt it doesnt seems to understand what im writing.

I have a saved parts list but we already have the parts. I just want it built for me. How much do you charge?

Hello, I made a purchase of a lenovo Leagen 5 pro in January. Along the computer, I bought a Eset protection plan. However, I couldn't find my receipt where the activition code is located. Can I get a copy of my receipt?

Trying to connect Xbox one to Asus MZ27A Designo monitor. It says out of range. Is it a compatibility issue?

I love the Inland Pro MK 67K keyboard, but I've had a lot of issues with bluetooth connectivity and latency (it has ALWAYS been laggy). I have an Macbook Pro 2021 M1. I've also had issues where direct wired connection doesn't work, and also the using RF receiver needing to be unplugged and replugged back in for it to be…

I just bought a pair of the X real air AR glasses. I'm enjoying them for on the go productivity while I'm editing or content consumption on the go. Has anyone else tried them?

swapped out processors. swapped out memory, still no boot and doesn't get to post screen. Is it a short or nvme or what. I am not a first timer. But I haven't seen this before

I recently bought a pulsar x2h mouse from Microcenter, however, I am not satisfied with it and want to return it, but I have already switched out the stock feet for glass ones I also bought from Microcenter and the stock ones were damaged beyond repair. Will I still be able to return the mouse (or even the feet) despite…

Background: first PC build ever, I am trying to play a fair amount of games in 4k with over 60 fps. With the 4090 out of stock everywhere I have some time to wait so I wanted to see what other more experienced people thought. In general, my questions are what am I going overkill on and what am I not putting enough into…