-
Welcome - Please Read Before Asking About Your PC
Welcome to the Micro Center Community. If you're looking to build or upgrade a PC, feel free to post questions and one of technical experts, or our savvy customers will help guide you in the right direction. Please don't forget to include relevant info to allow us to help you quicker, such as:* Budget * The games or…
-
Need Help Choosing Parts
First-time pc build- no experience. Any recommendations appreciated. Trying to build under 1000$ https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=9c8c6ddf-7846-4518-9105-fcc74483bd6d
-
Need Help Choosing Parts
Ok so based off the very little I know, this is what I have for an upgrade from my very outdated PC right now, but im just not sure if this is the best I can do and just need some valid criticism if needed. (I'm going budget-wise btw) cpu: AMD - Ryzen 5 5500 Cezanne 3.6GHz 6-Core AM4 Boxed Processor motherboard: ASRock -…
-
Need Help with my build. Overkill in some areas? What am I missing?
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=ee03952f-c857-4559-9087-20bb67bac0f5
-
Need Help Choosing Parts
PhD in need of high-performing PC for quantitative research New build or upgrade? New build, I have never owned or built a PC before. (I'm a Mac user but I need to switch to PC because of my work needs, so any instructions on how to assemble the parts would be appreciated too!) Existing parts/monitors to reuse? (List with…
-
Am I Doing This Right?
Hi there. First-time builder, long-time admirer of the PC lifestyle. I've had a gaming laptop that I've had the pleasure of running into the ground since college and I'm ready to upgrade. I mainly use this machine (and the one I am going to build) for 2D animation, digital art, etc. and some games. I'm dying to play Marvel…
-
Need Help Choosing Parts for a $1350 PC
Hello with all of microcenters deals and all i thought i'd try getting some parts, the problem is i have no idea which parts even start to go together so i'd really appreciate some help (please)
-
Need Help Verifying if this PC is compatible
Hello Everyone! I am in the process of building my first PC and I want to make sure that I got parts that work with well with each other. I want to make sure that I bought pieces to get the most that I could from the build without breaking the bank. I have included the part list below. I am planning on taking this to…
-
Need Help Choosing Parts
what do you think
-
Need Help Choosing Parts
Podcast editor building a PC for the first time. I've gotten by with my pre-build for the last 5 yrs doing mainly virtual recordings. We're moving towards working only with clients with who record in person, multi-cam, 4k video with large files that are going to absolutely destroy the pre-build. Hence, me building a PC.…
-
Need Help Choosing Parts for my first ever DIY computer build
hi awesome people of this galaxy, I want to build a NAS which can run maximum 2 virtual machines, must back up the data so act as NAS and if possible do some plex things too. This is what I have selected as of now. So couple of questions, Is this built good enough for me? Which os I should use, Unraid or truenas for my…
-
Need Help Choosing Parts
-
Need Help Choosing Parts
So right now, I am looking at starting a new/first build. I don't want to break the bank as much as possible but I do want quality gameplay. With the pc, I want to play games more like CSGO, R6, and other similar games. I have an Xbox series S and game-pass to play most triple-A games. Since I am new I don't know exactly…
-
Need Help Choosing Parts
Yo I build this but idk if I can use my full capacity of my ram sticks https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=0c7235fb-b8b0-4df0-a665-5c46c540b0fc
-
Need Help Choosing Parts for my girlfriends pc
I'm trying to build a new computer for my gf and want to make something she can stream the isle on. Trying to stay at a decent price range. This is that i have right now from what's available at my local microcenter: https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=eb62a980-3a0c-4fac-a205-97c80fb3f1e0…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. This is my first pc, I am on a budget and it is kinda flexible and what I have picked is not to expensive, if any one has any tips or anything I would appreciate it.…
-
Need Help Choosing Parts. I have never built a pc before and I need to know what parts I should pick
https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=f3cb6963-a756-47d6-834d-91188c53dc78 Is this good?
-
Need Help Choosing Parts
Good Day, I'm looking to upgrade my PC after a couple years, current gen games are finally showing its age, and I put together something with the PC builder and was hoping for some advice. My current goal is to get something able to run Monster Hunter Wilds without blinking and to stand up for the next few years without…
-
Starting a new build - Advice?
Is this a good combination to start a new AMD build? MSI - B550 MPG Gaming Plus AMD AM4 ATX Motherboard AMD - Ryzen 9 5900XT Vermeer AM4 3.30GHz 16-Core Boxed Processor - Heatsink Not Included Corsair - Vengeance LPX 64GB (2 x 32GB) DDR4-3200 PC4-25600 CL16 Dual Channel Desktop Memory Kit CMK64GX4M2E3200C16 - Black
-
Need Help Choosing Parts
Hey everyone, I'm putting together a build and need advice on making it more budget-friendly without sacrificing too much performance. I want to run League of Legends, Baldur’s Gate, Red Dead, Valo, Fortnite,i.e., at good settings while keeping costs as low as possible. Here’s what I currently have in mind: CPU: AMD Ryzen…
-
Need Help Choosing Parts
I'm trying to make a new gaming build with PowerColor's Hellhound RX 7800 XT + R5 7600x- budget of $1500 (Including 2+ year warranties), mainly for CS2, but for other FPS games as well. I dont have any requirements for compatibility, just need help to make the build the best I can! I need help trying to figure out if this…
-
display port cable 3 feet certified no locks Asus 790 - v WIFI prime Intel LGA Prime+ monitor=S9LMDW
Micro center built the PC for me but the display port has locks on one end and it's upside down. With the information given could you please recommend about a three foot display port that is certified and has no locks on it.
-
Need Help Choosing Parts
I was wondering if all of these parts were compatible with each other? I'm probably going to buy each and bring it to microcenter for them to build it. https://pcpartpicker.com/list/84qjJn
-
Need Help Choosing Parts
want a pretty high end build using the new 5070 and a bundle from micro center. budget is 2k-2.2k with all peripherals including superlight gpro 2 and wooting 80he. on my profile is the build i want to do (in the about me section). pls helpp
-
Building First PC to replace last two
So I need a new PC. My last two died, one from a DIGITAL STORM and one that a "Friend" built for me. The first one burned out, and the second one kept restarting. https://www.microcenter.com/product/669855/powerspec-g717-gaming-pc-platinum-collection I found this one but it sold out the parts were excellent and the price…
-
Can somebody double check if I have the right idea here?
Hi! I'm a first time PC builder, with little to no knowledge about parts and performance. I'm looking to get the most performance for about $2000. Upgradability is a must as well. If anybody has suggestions or comments, please!
-
Need Help Choosing Parts
Hey all, Boston native. I just had a roomate that built a computer and hes got me into the hobby. I know little to nothing but learning everyday. Im trying to build out my first PC. I mainly want for Microsoft Flight simulator, Stock trading, and gopro/drone editing. I am a commercial pilot and love how MFS has become so…
-
Building around my 4070, need help to make sure list is complete
I currently already have a 4070. I want to build around getting a 5080 at some point. I know some of these parts are overkill. I do a lot of FPS and Sim Racing running triple monitors. I want to be able to run games maxed out in 1440 How do this build look?…
-
Need Help Choosing Parts
Hello everyone! I have the opportunity to get a free ASUS ROG Strix GeForce RTX 4070 Ti SUPER, so I decided to build myself a full-fledged computer. I'll clarify right away that I want the Intel version. Tell me what are the shortcomings in the assembly?…
-
ASUS ProArt Z790 Motherboard
hi - I have been working on a new PC build for a couple of years but never got around to pulling the trigger. Over this holiday season I tried doing some stuff on my old computer and it failed. Time to pull the trigger on a new build. The system I had put together using the PC Builder App used an ASUS ProArt Creator WiFi…
-
Need Help Choosing Parts
New to PC building Been piecing together my first build and I don't know if this can work?? Also what cables/cords would be needed here? https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=c3a48fca-edae-45f2-8410-1934a2e58494
