-
Second gaming PC
Hi! I sold my first gaming setup because I moved countries, and now I'm looking for something alike, maybe more updated and oriented to 4k. My budget goes no further than $2.5K My first PC was: CPU: AMD Ryzen 7 7700X MB: Gigabyte X670 Aorus Elite AX VGA: Asus TUF Gaming GeForce RTX 4070 Ti OC Ram: Kingston Fury Beast 32GB…
-
Need Help Choosing Parts
https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=0f6b996c-6177-4ecf-b713-f31c2af82cf1
-
Need Help Choosing Parts
I'm thinking about making my first custom PC. Is there anything you would add or change to this build to make this a complete PC. I am wanting a 2K setup for gaming. Thank you for any advice! Here is the URL for my current build:…
-
Not quite sure what I'm doing, any suggestions?
I have a budget of around 1300-1400 and am looking for a pc that can run Minecraft and whatnot.
-
Need reasurance
These are my parts AMD Ryzen 9 9900X, MSI X870E MAG Tomahawk WiFi, G.Skill Flare X5 Series 32GB DDR5-6000 Kit, Computer Build Bundle Samsung - 990 EVO Plus 2TB Samsung V NAND TLC NAND PCIe Gen 4 x4 and PCIe Gen 5 x2 NVMe M.2 Internal SSD AMD Radeon RX 7600 XT Speedster SWFT210 Core Dual Fan 16GBLian Li - Lancool 207…
-
AMD Build for development
Hello, I'm a software engineer looking to build a PC. I'll be running Linux (Mint) as the OS. I do not do gaming. The biggest load the PC will experience is embedded Linux builds. These will usually utilize all available cores to parallelize the compile. These can last 1-2 hours (depends). I have some specs I know I need,…
-
Decent Build?
I've been wanting to build a pc for a while now and I am about to pull the trigger. I put this together, I'm in my budget but I'm not sure how well it will look and perform. I used the cheapest case the looked decent. I'm aware that there is no OS key, this is intentional because I am purchasing it somewhere else. If you…
-
Deciding between 2 systems
Looking to build between 2 new systems. Heading to microcenter this Sunday, so I'm giving them a shot at nearly every part. Thoughts or suggestions would be appreciated, I think I'm getting a bit overkill. There are 3 things I want this rig to do: 1) I want to stream roll20 and foundry games using discord and whatever web…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. 1) I want to stream roll20 and foundry games using discord and whatever web browser that day. 2) On other streams, I do painting, miniatures. 3) Lastly, I'd like to stream video games, I tend to the retro, but there's interest in new sometimes. The ONLY reason…
-
Why does it say "Compatibility Filters have been disabled for this item."
I was using the PC Builder and this alert shows up for the video card. Is there something wrong with my choices? This is the build I've put together so far: https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=e3e11e54-a276-413f-80f8-b727522b79e3
-
Need Help Verifying Parts
Hello! I am trying to build my own PC for the very first time, and was wondering if this build would be good for gaming and game dev. The games I play aren't too heavy usually, like Terraria or Satisfactory, but I do play games like Elden Ring occasionally and would like to run it with pretty good graphics and fps. Then…
-
Need Help Choosing Parts
I would like to build a pc and use it as a Minecraft server of 10 or less players. Would this work? https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=c0ab54d9-18f1-440c-ac64-af59cf6dc55a
-
Goal: Higher-end price-to-performance Build--Need Help Choosing Parts
Hello out there Micro Center Community, My goal is to go for a higher end price-to-performance build without getting too crazy with the absurd Nvidia GPU prices. Does this look like a pretty solid build to achieve this goal? I enjoy gaming, streaming, and want to get into music production in the near future. I'd like for…
-
4080, 4090, or 5080 for this? Hoping to use for VR and games like Cyberpunk at high/max settings
First build. Also want to do 4k video streaming/ movies (hence the disc drive). Overkill? I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=4ab95648-2900-43ea-8c7f-9affbecc885d
-
want to know if these components will work together or if I need to add anything
if you can help thanks
-
Gaming/3-D workstation sub $2K
Will this work?
-
Need Help Choosing Parts
looking to build my first PC with a $3,500 budget. Primarily will be used for gaming but also a little bit of work and files on the side. performance is most important! I am starting from the ground up and learning as I go so would need a complete list of everything I would need.
-
Need help choosing parts for a 50% productivity and 50% gaming pc
Hi guys, i'm building a pc that will be used 50% productivity and 50% gaming. Particularly programming, 3d modeling, and some video editing. Here is the build i've come up with so far. I've omitted a couple things like gpu and case I will likely be getting those used. GPU-wise, I am planning on buying a 3070 used, if you…
-
Building an AI Box
high-quality PSU (Corsair, EVGA, Seasonic, ASUS ROG) with: 1200W+ (80+ Platinum or Titanium rating) Overpower (PCIe 5.0) connector support Intel intei9-14900K (24 cores, 6GHz boost) DDR5 64GB NVIDIA RTX 4080 Super (20GB). If 5090 released liquid cooled 4 TB SSD for Mistral 7B
-
Potential AMD PC I Might Have You Guys Build
Does this look like a good prospective build?
-
Hi I would like some help building my first pc please. This is the build so far.
Configure Your PC: https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=d784cc30-fea3-4fa4-ace3-75951ad3a702CPU: (1) AMD Ryzen 7 7700X Raphael AM5 4.5GHz 8-Core Boxed Processor - Heatsink Not Included ($259.99 EACH)Motherboard: (1) MSI X670E Gaming Plus WiFi AMD AM5 ATX Motherboard ($279.99 EACH)RAM:…
-
help choosing parts to rebuild an old desktop
I am an amateur landscape and wildlife photographer and my computer needs are solely focused on that work. For awhile i have been using my laptop for all of my photo editing needs, but i recently found my old desktop in some of my old things when i was visiting my parents. It was about 10 years ago when i got that computer…
-
Need Help Choosing Parts
Hi I'm a first-time PC builder and I have chosen the Radeon 7800xt GPU, I'm not sure whether I should spend an extra 100$ on the 9 9900x or if I should go for the 7 9700x CPU. For that extra 100$ on the 9 9900x, the bundle also comes with a mobo that has wifi, whereas the 7 9700x comes with a mobo without wifi for 100$…
-
Need Help Choosing Parts
First-time pc build- no experience. Any recommendations appreciated. Trying to build under 1000$ https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=9c8c6ddf-7846-4518-9105-fcc74483bd6d
-
Need Help Choosing Parts
Ok so based off the very little I know, this is what I have for an upgrade from my very outdated PC right now, but im just not sure if this is the best I can do and just need some valid criticism if needed. (I'm going budget-wise btw) cpu: AMD - Ryzen 5 5500 Cezanne 3.6GHz 6-Core AM4 Boxed Processor motherboard: ASRock -…
-
Need Help with my build. Overkill in some areas? What am I missing?
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=ee03952f-c857-4559-9087-20bb67bac0f5
-
Need Help Choosing Parts
PhD in need of high-performing PC for quantitative research New build or upgrade? New build, I have never owned or built a PC before. (I'm a Mac user but I need to switch to PC because of my work needs, so any instructions on how to assemble the parts would be appreciated too!) Existing parts/monitors to reuse? (List with…
-
Am I Doing This Right?
Hi there. First-time builder, long-time admirer of the PC lifestyle. I've had a gaming laptop that I've had the pleasure of running into the ground since college and I'm ready to upgrade. I mainly use this machine (and the one I am going to build) for 2D animation, digital art, etc. and some games. I'm dying to play Marvel…
-
Need Help Choosing Parts for a $1350 PC
Hello with all of microcenters deals and all i thought i'd try getting some parts, the problem is i have no idea which parts even start to go together so i'd really appreciate some help (please)
-
Need Help Verifying if this PC is compatible
Hello Everyone! I am in the process of building my first PC and I want to make sure that I got parts that work with well with each other. I want to make sure that I bought pieces to get the most that I could from the build without breaking the bank. I have included the part list below. I am planning on taking this to…
