on new build and loading Windows 11 getting system dosn't meet requirements message

newbuild23

New build withASUS Z690-Plus motherboard, Inland Prime 1TB SSD NVMe PCIe Gen 3.0x4 M.2 card. whwn i try to load windows 11 home pro i get message that system don't meet requirements.

Any advise?

TSKevinG

If you still have issues with this you may want to check your motherboard manual as well on where the setting are in your bios as well.

TSKevinG

Good afternoon @newbuild23

If you have made the changes to the bios per the information from ASUS and Microsoft and it is still not working then may be best to bring it in so they can take a look at the system to see why the system is saying it is not supported. You may also want to try and speak with ASUS over the phone as well to see if they have any other suggestions for this. You would be able to reach them at (812)-282-2787

TSKevinG

Good afternoon @newbuild23

Thank you for contacting micro center. For the installation of windows 11 have you go in to the bios setting and made sure to enable secure boot along with tpm 2.0? with windows 11 this is required in order for windows 11 to work.

https://support.microsoft.com/en-us/windows/enable-tpm-2-0-on-your-pc-1fd5a332-360d-4f46-a1e7-ae6b0c90645c

newbuild23

Still no resolution to Windows 11 not meeting requirements.  I have made changes to Bios per manufacturer and Windows site referenced above with no better results.  Tried chat with Mirocenter was told they don’t support this on chat or phone.  I guess i will have to drive the hour to store for more assistance unless someone has more options to try.

newbuild23

Thanks for confirming that it is time to bring it in.  I have talked to ASUS this afternoon, very friendly but confirmed setting were correct and had me contact Microsoft who also said Bios was correct.

thanks for your quick follow up.