PowerSpec B670 RAID 1 Driver Selection

EvilDadGuy

I have a Micro Center PowerSpec B670 desktop and I am doing an ISO installation of Windows7.

The motherboard is a H67H2-CM with four SATA ports, and there are 2 x 1TB SATA HDDs installed. I want to reload the system with RAID 1. BIOS is configured for RAID, but I need to know which Intel driver (downloaded from Micro Center website) to select during an F6 install.

 The choices for the embedded AHCI Controller are:

   - Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller

   - Intel(R) Mobile Express Chipset SATA AHCI Controller

   - Intel(R) 5 Series/3400 Series SATA AHCI Controller

   - Intel(R) 5 Series 4 Port SATA AHCI Controller

   - Intel(R) 5 Series 6 Port SATA AHCI Controller

   - Intel(R) ICH10D/DO SATA AHCI Controller

   - Intel(R) ICH10R SATA AHCI Controller

   - Intel(R) EP80579 SATA AHCI Controller

   - Intel(R) ICH9M-E/M SATA AHCI Controller

   - Intel(R) ICH9R/DO/DH SATA AHCI Controller

   - Intel(R) ICH8M-E/M SATA AHCI Controller

   - Intel(R) ICH8R/DH/DO SATA AHCI Controller

   - Intel(R) ESB2 SATA AHCI Controller

   - Intel(R) ICH7M/MDH SATA AHCI Controller

   - Intel(R) ICH7R/DH SATA AHCI Controller

 Best guess I can make are either #1 or #4.

 Thanks,

Steve

PowerSpec_MikeW

@EvilDadGuy

Download this file: http://powerspec.com/support/files/psdriver_10k.exe

Default extract path, this is the folder you'll need for the F6 driver: C:\drivers\chipset\Intel\f6flpy64

Copy the F6flpy64 folder to a flash drive. Select the folder, install the iaStor.inf. Drive should appear.

EvilDadGuy

Thank you very much! The system is reloading and I there appears to be no issues.