Question about 4070ti (Asus Tuf and PNY models)

PastaSawce

Hey everyone, I have a question about if the 4070ti Asus tuf model (oc or non oc) or the PNY model would be able to fit inside my current rig.

CPU: AMD Ryzen 5 5600X

GPU: Asus Tuf 1650 super oc 4gb

RAM: G.Skill Trident Z RGB DDR4 3200xmp 32gb (x4 8gb)

Mobo: Aorus Pro-P B550M

PSU: Corsair RM750x 750 watts

CPU cooler: Cooler Master Hyper 212 black edition

Case: Phanteks Eclipse P350x Mid tower

I tried to do some measurements myself and it seems like it might, but it would be VERY close. I am also worried it will not be flush as well. On the case I have, towards the fans, is a section that rises out that looks like it would inhibit the card from actually being seated properly. I wanna upgrade my rig and I am looking at one of those to consider getting, but worried about if it would even fit.

Thanks in advance if you can answer :)

Ian

Greetings,

Per the manufacturer's site it supports cards up to 400mm, but that will vary a little based on front fan placement. You can take the specs from the card and measure it against your layout and it should give you the best idea on fit.

https://phanteks.com/Eclipse-P350X.html

PastaSawce

Thank you Ian. I was doing some checking, and it might fit. Based on your picture and the specs (I went to the manufacture website to find the specs since I don't remember what I did with the booklet I got with the case) and you are right that it should fit a 400mm size card. However, I am concerned if you look where the fans are and that back plate kind of rises out so I'm wondering now if it would even be flush. Thank you for your comment though, it was helpful. :)

Ian

https://community.microcenter.com/discussion/comment/48557#Comment_48557

You're welcome! If you have any other questions for us please let us know.

Aodhan_Gorman

According to Phanteck's website the internal dimensions of the case should accommodate GPUs of up to 400mm in length and CPU coolers up to 160mm (this is a good alternative when they do not specify GPU Width). So, unless your power cables coming out of the GPU are very stiff or thick making them push into the glass, you should be able to fit the 305 x 138 x 65 mm Tuf card inside this case. We unfortunately do not carry the P350x so I cannot verify these sizes in person, but the math checks out!

PastaSawce

Thank You all for your help!