Making high end pc with no budget concerned about bottlenecks or incompatible parts

Jobama

Looking to have this PC for about 5 years without needing many upgrades

Mainly concerned about the SSD being compatible since it would only show up once I searched it

Are there any bottlenecks, cooling issues , or incompatible parts I'm still unsure even with the compatibility filter on and checking myself

Went for 4080 since 4090's are sold out

Parts down here

Core i9-13900K Raptor Lake 3.0GHz Twenty Four-Core LGA 1700 Boxed Processor - Heatsink Not Included

Trident Z5 RGB Series 64GB (2 x 32GB) DDR5-6000 PC5-48000 CL30 Dual Channel Desktop Memory Kit F5-6000J3040G32GX2-TZ5RK - Black

O11 Dynamic XL ROG Tempered Glass eATX Full Tower Computer Case - Black

RMx SHIFT Series RM1000x 1000 Watt 80 PLUS Gold Fully Modular ATX Power Supply

NVIDIA GeForce RTX 4080 AERO Overclocked Triple Fan 16GB GDDR6X PCIe 4.0 Graphics Card

Two | 980 Pro SSD 2TB M.2 NVMe Interface PCIe Gen 4x4 Internal Solid State Drive with V-NAND 3 bit MLC Technology (MZ-V8P2T0B/AM)

FireCuda 8TB 7200 RPM SATA III 6Gb/s 3.5" Internal CMR Hard Drive

Two | BarraCuda 2TB 7200 RPM SATA III 6Gb/s 3.5" Internal SMR Hard Drive

Kryonaut Thermal Grease Paste - 5.55 Grams

Galahad 360mm RGB Water Cooling Kit - White

UNI Fan SL Infinity Fluid Dynamic Bearing 120mm Case Fan - 3 Pack Black

Ian

You don't have a motherboard picked out, so you're going to need one that supports LGA 1700 and the amount of m.2's and SATA drives you'd want at bare minimum.

Jobama

Z790 MPG Edge WiFi Intel LGA 1700 ATX Motherboard

I forgot to put it in the list

Ian

That all should be just fine. The motherboard has the necessary slots for the drives you are looking to have.