I recently bought a Power Spec G446, but it only turns on every other time (the second time).

User1

After shutting down my PC, when I turn it on again there is no signal to my monitor. Even though the fans and RGB works perfectly fine and the GPU fans spins too, it shows no signal on my monitor. Then, when I shut it down again and turn it on again, there is signal. How can I fix it so that I don't have to boot my computer twice to get signal on my monitor.

User1

How do I fix it? I already tried some of the videos online telling me to turn of quick start setting.

PowerSpec_MikeW

@User1

There are debug LED's on the top right of the board, by the 24 pin. The next time you do this, watch those LED's and let me know what they're doing.

User1

@PowerSpec_MikeW
The red lights up for a brief second, then the orange one for a brief second, next, the white one lights up for about 10 seconds. The white light eventually turns off too. 

PowerSpec_MikeW

@User1

Normal POST, board is telling you it's coming back up without an issue. When it's doing this, toggle your num or caps lock and see if the light will toggle on and off. If it does, it's a display output issue.