Add another SSD to PowerSpec G439?

Keeria

I would like to add an additional SSD to my powerspec G349.

1. Is this possible?
2. What form factor SSD do I need to purchase?
3. Do I need any additional hardware, brackets, or cables?

Thanks

PowerSpec_MikeW

@Keeria

You have a lot of options then.

4x M.2 of which 3 are available. M.2_2 and M.2_4 are Gen4. M.2_3 is Gen3, so avoid that slot if you buy a Gen4 drive. Screws or tool-less latches are preinstalled.

2x2.5" Drives - You will need the standard M3 screws to secure it and a SATA data cable if you don't have the cables included with the system.

2x3.5" Drives - You just need SATA data cables, these bays are tool-less.

Here's our guide with installation instructions:

https://community.microcenter.com/discussion/14123/powerspec-atx-205-chassis

PowerSpec_MikeW

@Keeria

Sorry, did you mean G439?

Keeria

Oh yeah, G439. Totally typoed that one.

Sorry.

Keeria

Okay.

I went up to the Bethel Road MicroCenter and got a 2TB Inland SSD. I had a little trouble moving the tiny screw from the inner to the outer post so the ssd would fit properly but it's all done and formatted now.

Thanks for the help