Ender 5 Plus 3D Printer X Axis Issue
Good Afternoon,
Whenever the printer goes to find its "home" position, the X axis engages the limit switch but the gantry does not stop. The stepper motors still try to drive the gantry (Which is NOT good). I have tested the limit switch and it works. Maybe the main board? Any ideas?
David
Whenever the printer goes to find its "home" position, the X axis engages the limit switch but the gantry does not stop. The stepper motors still try to drive the gantry (Which is NOT good). I have tested the limit switch and it works. Maybe the main board? Any ideas?
David
Categories
- All Categories
- 1 The Blog
- 1 What's Trending
- 7.5K The Community
- 3.1K General Discussion
- 112 New Members
- 799 Consumer Tech
- 200 Prebuilt PCs and Laptops
- 157 Software
- 30 Audio/Visual
- 50 Networking & Security
- 4 Home Automation
- 5 Digital Photography
- 12 Content Creators
- 28 Hobby Boards & Projects
- 76 3D Printing
- 83 Retro Arcade/Gaming
- 60 All Other Tech
- 301 PowerSpec
- 2.5K Store Information and Policy
- 143 Off Topic
- 43 Community Ideas & Feedback
- 599 Your Completed Builds
- 3.7K Build-Your-Own PC
- 2.7K Help Choosing Parts
- 318 Graphics Cards
- 330 CPUs, Memory, and Motherboards
- 135 Cases and Power Supplies
- 52 Air and Liquid Cooling
- 46 Monitors and Displays
- 89 Peripherals
- 59 All Other Parts
- 62 Featured Categories
We love seeing what our customers build
Submit photos and a description of your PC to our build showcase
Submit NowLooking for a little inspiration?
See other custom PC builds and get some ideas for what can be done
View Build ShowcaseSAME DAY CUSTOM BUILD SERVICE
If You Can Dream it, We Can Build it.
Services starting at $149.99