RTX 2070 Super and Ryzen 5 3600 not producing desired FPS on Destiny 2

Options
NateDZD
NateDZD ✭✭
First Anniversary First Comment Name Dropper Photogenic
edited December 2020 in General Discussion

I can’t seem to figure out what’s going on. According to GPU Check, I should be getting around 158 FPS at 1440p with the graphics set to “Ultra,” but I’m only getting 80-90 FPS in quieter zones and around 50-60 FPS when the action picks up. I had initially set the framerate cap to 144 (since my monitor’s refresh rate is 144 Hz), but I removed the cap just to check, and there was no change. I applied a small overclock (+115 MHz on the core and +10 MHz on the memory), but that didn’t do anything.

I'm getting 150-160 FPS in menus and loading screens.

Here are my complete system specs:

  • CPU: Ryzen 5 3600
  • GPU: RTX 2070 Super, 8GB GDDR6
  • Mobo: B550 Tomahawk
  • SSD: 1TB NVMe Gen 3
  • HDD: 4TB 7200 RPM
  • Memory: 32GB DDR4 3600
  • Monitor: AOC 1440p 144 Hz FreeSync, G-Sync compatible

Comments

  • AdamL
    Options
    Destiny 2 is a notoriously difficult game to run unfortunately. Your frame rates are pretty accurate for 1440p and ultra settings. Just fiddling with the Anti-Aliasing. Turn that down a notch, and make sure V/G-Sync is off haha. Something else to maybe check out, have you enabled XMP on your RAM in the BIOS? That usually gives a few extra FPS. And you can also overclock that memory a bit farther if you want. Pretty solid overclock on that core though! Let me know if this helped!
We love seeing what our customers build

Submit photos and a description of your PC to our build showcase

Submit Now
Looking for a little inspiration?

See other custom PC builds and get some ideas for what can be done

View Build Showcase

SAME DAY CUSTOM BUILD SERVICE

If You Can Dream it, We Can Build it.

Services starting at $149.99