Need technical specs and manuals for Inland ESP32 and ESP-01S boards

jim_st

There are no standards specified to match these boards.  Need schematics and also initial code base loaded into the part to be able to restore as-shipped state after using these.
Also there is no information on the ESP-01S as to how it works and there is a danger of damage and nothing on the packaging or the net to warn of that.

jim_st

A reviewer made the following template of the pinout for this board.
https://github.com/natedogg2020/Inland_ESP32-Supplements
The board is supposedly the same as the expresstif ESP32 devkit board.  Schematic here.
https://dl.espressif.com/dl/schematics/esp32_devkitc_v4-sch-20180607a.pdf

JS_MC

Hello @jim_st

I've was able to find this schematic for the ESP32, however, I do not see anything for the ESP-01 at this time. I'm enquiring with our buyers about this to see if there is one available!

Please see attached.

AlexPasseno

https://wiki.keyestudio.com/KS0388_Keyestudio_USB_to_ESP-01S_Wifi_Module_Serial_Port_Shield Here is the documentation for the esp-01s/ usb programmer

https://wiki.keyestudio.com/KS0413_keyestudio_ESP32_Core_Board And here is the documentation for the esp32 board!