Need Help with ASUS Prime Pro (RGB, Fans, & Strimer Plus)

SWSturm

So I'm going to be building in a Lian Li 011 Dynamic Mini Snow Edition and looking to hook up a total of 9 Lian Li Uni fans (120mm). 3 on top (daisy chained), 3 on bottom (daisy chained), 2 on AIO (daisy chained), and 1 on rear. I'd also like to use Lian Li strimer plus 24 and 8 pin, if possible.

Everything else I seem to have a handle on when it comes to putting together this PC except for hooking these up correctly.

Any help from someone with experience with using the ASUS X570 Prime Pro would be greatly appreciated.

TSPhillipT

Hello @SWSturm

Thank you for posting on the Micro Center Community!

So your Lian Li Strimer comes with a controller that you can plug your 24 Pin to and connect your Daisy Chained Lian Li Fans to

SWSturm

Thanks for replying. Okay, just to clarify, so you're saying I can connect the three sets of daisy chained fans (3-3-2) plus the 9th fan AND the 24 pin and 8 pin strimer plus to the one ARGB header via the controller?

TSTDavey

@SWSturm Just chiming in. Yes that is correct? Here's a video.

https://www.youtube.com/watch?v=vj6ZfXUfoAU

SWSturm

So it should work like this: 3 splitters into the hub. 1 splitter = 3 bottom and 2 AIO fans, 1 splitter = 3 top and 1 side fan, and 1 splitter = both 24 and 8 pin Strimer plus. Am I correct in my thinking?

TSTDavey

@SWSturm Yes that concept should work. You should only have 1 AIO cooler. What 2 AIO cooler Fans are you describing?

SWSturm

I'm replacing the 2 fans on the Lian Li 240 Galahad AIO with 2 SL 120 Uni fans.

TSTDavey

@SWSturm oh okay, their just chainable case fans. Okay gotchu.