Powerspec G464 stuck on reboot LED cycle
Options
Just purchased a Powerspec G464 Jan 1. On reboot, no display shows up and LED on motherboard cycles through orange, red, white, over and over again. Lasted 20-30 minutes then finally windows started. How do I permanently fix this?
Joe H
Joe H
Comments
-
Hello @Joe_H51. When you get this reboot cycle, is it random or does it happen every time? Do you get any codes in event viewer?
-
Greetings,
The LED's you're seeing are CPU(Red), Memory(Yellow), Video(White). Basically it's going through the POST process over and over. This will normally fail and rollback to failsafes after a few tries. It shouldn't happen at all on a new Powerspec, and it certainly shouldn't take 30 minutes to boot properly.
Please install this program: https://download.cpuid.com/cpu-z/cpu-z_1.94-en.exe
I would ask you for screenshots of CPU, Mainboard, Memory and the SPD tabs.
Categories
- All Categories
- 1 The Blog
- 1 What's Trending
- 6.9K The Community
- 2.9K General Discussion
- 80 New Members
- 710 Consumer Tech
- 163 Prebuilt PCs and Laptops
- 148 Software
- 27 Audio/Visual
- 43 Networking & Security
- 3 Home Automation
- 5 Digital Photography
- 10 Content Creators
- 27 Hobby Boards & Projects
- 64 3D Printing
- 80 Retro Arcade/Gaming
- 55 All Other Tech
- 212 PowerSpec
- 2.4K Store Information and Policy
- 133 Off Topic
- 25 Community Ideas & Feedback
- 585 Your Completed Builds
- 3.4K Build-Your-Own PC
- 2.4K Help Choosing Parts
- 299 Graphics Cards
- 297 CPUs, Memory, and Motherboards
- 131 Cases and Power Supplies
- 49 Air and Liquid Cooling
- 42 Monitors and Displays
- 88 Peripherals
- 54 All Other Parts
- 55 Featured Categories
We love seeing what our customers build
Submit photos and a description of your PC to our build showcase
Submit NowLooking for a little inspiration?
See other custom PC builds and get some ideas for what can be done
View Build ShowcaseSAME DAY CUSTOM BUILD SERVICE
If You Can Dream it, We Can Build it.
Services starting at $149.99