Full size cabinet power switch

Options
I noticed in the installation instructions, the front panel has a rectangle hole cut and it’s labeled as an optional power switch.
does anyone know what switch fits in that hole? It has to have been cut for something specific.

Comments

  • PowerSpec_MikeW
    PowerSpec_MikeW
    Seventh Anniversary 2500 Comments 100 Answers 250 Likes
    PowerSpec Engineer
    Options
    Greetings @fl3030

    I assume you're referring to our full sized arcade cabinet, correct?
  • fl3030
    Options
    Hi @TSMikeW Sorry, Yes i'm talking about the full sized arcade cabinet. The front panel has a round hole that's labeled for an optional USB port and the rectangle is labeled as an optional power switch. I'm wondering what switch that hole was cut out for.
  • PowerSpec_MikeW
    PowerSpec_MikeW
    Seventh Anniversary 2500 Comments 100 Answers 250 Likes
    PowerSpec Engineer
    Options
    @fl3030

    Thanks for clarifying. I'll look into it and see what we can find out.
  • @fl3030
    It's designed for a fused switched IEC inlet like this one:

    https://www.amazon.com/dp/B06XNMT3WL/ref=cm_sw_r_cp_api_glt_fabc_VVS4KG6RXVV09Z6B2DD6

    Wiring this would require working with 120v, so it's not something you should do unless you feel comfortable with that.

  • Kalk
    Options

    Could I bump this up? It's pretty weird having the two holes in the front of the cabinet with nothing to fill them... the rectangle is too big for a rectangular push button to cover, even.

    Strange for Micro Center to sell the kit with those holes and not sell anything that would be used to fill them.

  • Kalk
    Options

    Or does anyone know where I (we) could source a black plastic plug for it? I'm even thinking about having something 3D printed as a last resort.

    FYI - the product pictures do not show the holes cut out, so I'm not sure if this is a new revision or perhaps by accident?

  • fl3030
    Options

    Here is what I ended up doing.

    I grabbed a cheap USB extension and power button from Amazon. Cut a small piece of plastic mounted the button to that then mounted the plastic to the back of the board. it look a little it of wiring to get the computer's motherboard but it works perfect.


    IMG-5001.jpg


We love seeing what our customers build

Submit photos and a description of your PC to our build showcase

Submit Now
Looking for a little inspiration?

See other custom PC builds and get some ideas for what can be done

View Build Showcase

SAME DAY CUSTOM BUILD SERVICE

If You Can Dream it, We Can Build it.

Services starting at $149.99