I purchased this motherboard and this cable to install on the Lancool 2 white mesh case but I dont see a connector on the motherboard for this cable. Am I missing something or is it not compatible?
Hello @Mrvictor
Are you referring to the case I/O connector, it appears the manual states it is on the right side of the motherboard. Figure 10. Which is just below the ATXPWR1 connector. Figure 9
More information about the motherboard connectors can be found on Page 8 of the motherboard manual.
https://download.asrock.com/Manual/B550%20Pro4.pdf
@Mrvictor just chiming in. That should be your USB 3.0 header connector. So the first picture has the usb end that should go into your usb front panel and then you should have a blue usb 3.0 20 pin connector, and it should connect to the USB3_7_8 port on the motherboard. See the link below on page 13, the motherboard layout. USB3_7_8 is item #10.
Motherboard LInk
Here's a video to.
https://www.youtube.com/watch?v=SOW7KeoWLgY
@Mrvictor Ahh, you're referring to a USB 3.1, Gen 2, 10Gb, Type-C header. I don't see that your motherboard has the appropriate header for this connector.
I don't see that we carry this currently, but you're looking for a USB 3.1, Gen 2, 10Gb, Type-C header to internal IDC 20 Pin.
I noticed you already have a 20pin connected to your USB header on your motherboard so I'd recommend using a Y splitter to accommodate having the two connection types.
I hope this helps, but let me know if you have questions.
Submit photos and a description of your PC to our build showcase
See other custom PC builds and get some ideas for what can be done
Services starting at $149.99
