HDMI/DisplayPort no signal
Best Answer
-
Greetings @Aeric
First, please verify you're connecting to the lower set of ports on the video card, and not the integrated graphics. This is disabled by default due to the presence of a discrete graphics card.
If that's not the issue, look on the bottom middle of the board. Between the chassis fan and USB 3 header there's a set of debug LED's. Which one is lit?
Answers
-
My PC is a PowerSpec G361
-
I am plugging into the lower set of ports. There is no LED lit. When I do plug my HDMI into the top HDMI port it does display on my monitor.
-
All good here, got it figured out.
-
Glad to hear you got that sorted out. Please let us know if you have any other questions.
-
I'm experiencing a similar issue. I purchased this G164 GAMING COMPUTER in January 2021 and have been using it with no problems until the other day (November 2022) , when suddenly, one of the monitors (the one which came with the computer) no longer was receiving a HDMI signal. I tried the monitor and the HDMI cable on a different computer and these worked fine then. So, it's the HDMI connection on the computer itself. What would make this happen?
-
Have you verified the options as Mike posted above? It should apply to help us figure out the issue!
First, please verify you're connecting to the lower set of ports on the video card, and not the integrated graphics. This is disabled by default due to the presence of a discrete graphics card.
If that's not the issue, look on the bottom middle of the board. Between the chassis fan and USB 3 header there's a set of debug LED's. Which one is lit?
-
Thanks for responding, Ian. I didn't realize until just now that you had.
Yes, I had the connections correct. It had been working fine for a year and ten months.
I do not see ANY debug LEDs. Anywhere. At all. 😐️
-
No debug LED's on the G164 to help us out here. There's a few things we can key on. First, power the system on and let it sit for a minute or so. Does the "Cap lock" key respond if you tap it? Spam the shift key rapidly, do you hear a warning tone? That can help us figure out if it's a No POST or no video.
You can also look at the CPU fan, it's hard to tell without LEDs, but watch it and see if the speed is consistent. If the system POST's, you'll see it change when the motherboard takes over thermal control.
Categories
- All Categories
- 1 The Blog
- 1 What's Trending
- 7.4K The Community
- 3K General Discussion
- 102 New Members
- 789 Consumer Tech
- 197 Prebuilt PCs and Laptops
- 154 Software
- 30 Audio/Visual
- 50 Networking & Security
- 4 Home Automation
- 5 Digital Photography
- 12 Content Creators
- 28 Hobby Boards & Projects
- 75 3D Printing
- 83 Retro Arcade/Gaming
- 60 All Other Tech
- 287 PowerSpec
- 2.5K Store Information and Policy
- 140 Off Topic
- 40 Community Ideas & Feedback
- 596 Your Completed Builds
- 3.6K Build-Your-Own PC
- 2.6K Help Choosing Parts
- 303 Graphics Cards
- 324 CPUs, Memory, and Motherboards
- 134 Cases and Power Supplies
- 50 Air and Liquid Cooling
- 46 Monitors and Displays
- 88 Peripherals
- 57 All Other Parts
- 62 Featured Categories
We love seeing what our customers build
Submit photos and a description of your PC to our build showcase
Submit NowLooking for a little inspiration?
See other custom PC builds and get some ideas for what can be done
View Build ShowcaseSAME DAY CUSTOM BUILD SERVICE
If You Can Dream it, We Can Build it.
Services starting at $149.99