Motherboard wont boot to Windows 10
I have a new install, ROG STRIX X570, updated bios, installed windows 10 to M.2 1TB drive. Reset bios to defaults and made M.2 master boot. On reboot it stops and says F1 to setup, go back to drive F8, then reboot to windows. Question how to make switch on go straight to OS ?
Comments
-
Greetings @nige4554
Fresh Windows 10 install on this system should be an EFI boot. Try disabling CSM(Support Compatibility Module) in the BIOS under the "Boot", then save and exit. See if it boots normally. -
Resolved, CPU fan error, change in bios to ignore now boots straight to windows
-
@nige4554
Glad you were able to resolve it. Are using an All in One/Custom Loop Liquid Cooling? I have seen it where the system won't boot if the CPU_Fan was plugged in even if the PUMP was plugged in, thinking this may be the case here.
Categories
- All Categories
- 1 The Blog
- 1 What's Trending
- 7.6K The Community
- 3.1K General Discussion
- 118 New Members
- 810 Consumer Tech
- 204 Prebuilt PCs and Laptops
- 158 Software
- 31 Audio/Visual
- 50 Networking & Security
- 4 Home Automation
- 5 Digital Photography
- 13 Content Creators
- 28 Hobby Boards & Projects
- 79 3D Printing
- 83 Retro Arcade/Gaming
- 60 All Other Tech
- 319 PowerSpec
- 2.6K Store Information and Policy
- 145 Off Topic
- 47 Community Ideas & Feedback
- 601 Your Completed Builds
- 3.8K Build-Your-Own PC
- 2.7K Help Choosing Parts
- 321 Graphics Cards
- 332 CPUs, Memory, and Motherboards
- 139 Cases and Power Supplies
- 53 Air and Liquid Cooling
- 46 Monitors and Displays
- 89 Peripherals
- 60 All Other Parts
- 62 Featured Categories
We love seeing what our customers build
Submit photos and a description of your PC to our build showcase
Submit NowLooking for a little inspiration?
See other custom PC builds and get some ideas for what can be done
View Build ShowcaseSAME DAY CUSTOM BUILD SERVICE
If You Can Dream it, We Can Build it.

Services starting at $149.99