Portable VFX PC Workstation for Virtual Production/VR
Options
Hi All,
I'm rolling into virtual production with motion capture suits and need a portable pc workstation asap! My budget for this build would ideally be under 5k, not including a monitor. Hoping to invest in a Cintiq to work as my monitor, but open to thoughts. I'd like a smaller case for the build to minimize overall bulk for easier mobility. Other than that I need this build to fit the following specs for my motion capture suit, software, and the use of UNREAL ENGINE for virtual production/VR.
The recommended specs I need for this pc build are as follows:
Video Output: HDMI 1.4, DisplayPort 1.2 or newer
USB PORT: 1x USB 2.0 or newer
***ALSO needs a DeckLink 8K Pro capture card from Black Magic Design
I'm open to suggestions all around. Thanks so much for your help!
I'm rolling into virtual production with motion capture suits and need a portable pc workstation asap! My budget for this build would ideally be under 5k, not including a monitor. Hoping to invest in a Cintiq to work as my monitor, but open to thoughts. I'd like a smaller case for the build to minimize overall bulk for easier mobility. Other than that I need this build to fit the following specs for my motion capture suit, software, and the use of UNREAL ENGINE for virtual production/VR.
The recommended specs I need for this pc build are as follows:
| Processor: | Intel Core i5-4590/AMD FX 8350 equivalent or better |
| GPU | : NVIDIA GeForce GTX 1060, AMD Radeon RX 480 equivalent or better |
| Memory | 4 GB RAM or more |
USB PORT: 1x USB 2.0 or newer
| Operating system: | Windows 7 SP1, Windows 8.1 or later, Windows 10 |
I'm open to suggestions all around. Thanks so much for your help!
Comments
-
Hello!
https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=3d31d845-afe0-44b1-a2a2-a392115bac11
Here is a build I drafted up using an mATX Case as ITX boards would not be able to fit your additional PCIe capture card. This build has an ElGato Capture Card inside it however that is just a place holder for your current one. I think the Ryzen 9 3900 is the best processor we can go with though you can upgrade to the 3950X for just a bit more power. This build goes to 1,765.90 so there is a lot of room to change for higher end parts, however your original list wasn't asking for super high end parts.
Categories
- All Categories
- 1 The Blog
- 1 What's Trending
- 6.9K The Community
- 2.9K General Discussion
- 80 New Members
- 709 Consumer Tech
- 161 Prebuilt PCs and Laptops
- 148 Software
- 27 Audio/Visual
- 43 Networking & Security
- 3 Home Automation
- 5 Digital Photography
- 10 Content Creators
- 27 Hobby Boards & Projects
- 65 3D Printing
- 80 Retro Arcade/Gaming
- 55 All Other Tech
- 217 PowerSpec
- 2.4K Store Information and Policy
- 133 Off Topic
- 26 Community Ideas & Feedback
- 585 Your Completed Builds
- 3.4K Build-Your-Own PC
- 2.4K Help Choosing Parts
- 299 Graphics Cards
- 297 CPUs, Memory, and Motherboards
- 131 Cases and Power Supplies
- 49 Air and Liquid Cooling
- 42 Monitors and Displays
- 88 Peripherals
- 54 All Other Parts
- 55 Featured Categories
We love seeing what our customers build
Submit photos and a description of your PC to our build showcase
Submit NowLooking for a little inspiration?
See other custom PC builds and get some ideas for what can be done
View Build ShowcaseSAME DAY CUSTOM BUILD SERVICE
If You Can Dream it, We Can Build it.
Services starting at $149.99