PowerSpec I3 Mini - Can't level Bed

Options
nexusguy59
nexusguy59 ✭
Name Dropper First Comment
in General Discussion
Hello Everyone,
       I have had this printer for 2 years and everything has been fine. I have only printed a few times with but never had a problem. Yesterday I went to start a print and now I can't level the bed. I set the Z on it to 003.0 and is set but when I save setings and go back to level bed the nozzle/hotend/extruder pushes down on the bed. I have a video of this and it is driving me nuts I didn't do anything different than before. Can someone please help.

Thanks,
Michael
· Share on FacebookShare on Twitter

Comments

  • PowerSpec_MikeW
    PowerSpec_MikeW PowerSpec Engineer
    First Anniversary First Comment 5 Awesomes 5 Up Votes
    Options
    Greetings @nexusguy59

    Please provide a link to the video. Is the nozzle hitting at certain points across the bed? Or you're saying you level the bed, everything is fine, but the nozzle still contacts the bed? Is it damaging or making the bed surface, or are you just able to tell this from the prints?
    · Share on FacebookShare on Twitter
  • nexusguy59
    nexusguy59 ✭
    Name Dropper First Comment
    edited February 2021
    Options

    Sorry I didn't get this until now. In answer to your question yes the nozzle is pushing down on each corner when i try to level the bed it has never down that before. Any ideas.

    http://coopfire.com/images/Bed_not_Adjusting_Error1.mp4

    There is the link on what's it's doing. Thank you for looking.


    Michael

    · Share on FacebookShare on Twitter

Categories

We love seeing what our customers build

Submit photos and a description of your PC to our build showcase

Submit Now
Looking for a little inspiration?

See other custom PC builds and get some ideas for what can be done

View Build Showcase
View builds by:

SAME DAY CUSTOM BUILD SERVICE

If You Can Dream it, We Can Build it.

Services starting at $149.99

More Details

Micro Center Homepage

Service, Upgrades & Repairs