Why Not Have NVMe SATA Drives for Both System And Data?
Greetings! I hope this question won't betray too much of my lack of knowledge. 😏
With good quality 2 TB NVMe M.2 SSDs now available for $80, is there any reason NOT to use an NVMe M.2 SSD for both my system drive and my data drive? I ask because, both in pre-built PowerSpecs and in PC Builder, the second drive offered is typically a 2.5-inch SATA SSD.
Given the choice between a svelte 2280 form factor that sits directly on the PCIe bus and a klunky (by comparison) 2.5-inch drive that connects through cables and a SATA controller, why would someone choose the latter if they can have the former?
Thanks for your advice.
Best Answer
-
Nope, the biggest reason was price per GB. With SSDs getting cheaper, I'd strongly recommend using multiple SSDs if possible. That's what I do on my home system. Even for my dad's Plex server, I have a large SSD to create a block level cache on a RAID6 drive setup. A single 2TB SSD caching 16TB worth of spinners.
That said, SSDs do have the problem of finite write cycles, so if you are writing a ton of data at a time, traditional disks might still be beneficial assuming you buy one purpose built for your task. For most people though, they'll never exceed the write cycles of an SSD under normal everyday workloads.
Answers
-
Thanks for your reply.
"That said, SSDs do have the problem of finite write cycles, so if you are writing a ton of data at a time, traditional disks might still be beneficial assuming you buy one purpose built for your task."
For someone who commonly writes 'a ton of data at a time' I agree that an HDD might be a better choice. Absent that use case, it seems to me that any SSD is inherently more reliable, since there are no mechanical parts to fail.
-
Exactly. The finite writes in my opinion are a much easier compromise than traditional HDD's inherent weakness to vibration and shock. The last data server we made here was purely SSD based (NVME + U.2), definitely lightning fast and far more affordable now.
-
Well my motherboard only has two m.2 and four sata. So after I get two m.2 and needed more storage, what else besides get sata types. Seems pretty straightforward.
-
If you have spare PCIe lanes available, it's also worth considering a PCIe add-in card for more NVMe storage. My next project is to create a single system in the house to store all of my steam games so I can transfer them over the network instead of downloading from Steam directly. Hard part is justifying buying a 10gbit router to facilitate the transfer without bottlenecking the NVMe drives too much, lol.
-
All my Steam games go on the SATA type, which is plenty fast enough for gaming.
Categories
- All Categories
- 1 The Blog
- 1 What's Trending
- 8.1K The Community
- 3.2K General Discussion
- 149 New Members
- 885 Consumer Tech
- 240 Prebuilt PCs and Laptops
- 171 Software
- 33 Audio/Visual
- 54 Networking & Security
- 4 Home Automation
- 5 Digital Photography
- 14 Content Creators
- 30 Hobby Boards & Projects
- 84 3D Printing
- 84 Retro Arcade/Gaming
- 63 All Other Tech
- 482 PowerSpec
- 2.7K Store Information and Policy
- 154 Off Topic
- 67 Community Ideas & Feedback
- 620 Your Completed Builds
- 4.1K Build-Your-Own PC
- 3K Help Choosing Parts
- 329 Graphics Cards
- 338 CPUs, Memory, and Motherboards
- 146 Cases and Power Supplies
- 54 Air and Liquid Cooling
- 51 Monitors and Displays
- 94 Peripherals
- 71 All Other Parts
- 65 Featured Categories
We love seeing what our customers build
Submit photos and a description of your PC to our build showcase
Submit NowLooking for a little inspiration?
See other custom PC builds and get some ideas for what can be done
View Build ShowcaseSAME DAY CUSTOM BUILD SERVICE
If You Can Dream it, We Can Build it.
Services starting at $149.99