Unusual Behavior from GPU
Hi all,
I recently reinstalled my 3060 GPU, RAM, and M.2 while switching out my SSD (it was difficult to install without moving things around) and made sure to ground my PC while doing so
However, before reinstalling these parts my pc at idle with only chrome and wallpaper engine ran at an expected <10% load, but after reinstalling a few parts, my GPU's load at idle is either at 35%-45% and clock speeds are rapidly oscillating between 250 MHz and 1800 MHz
This is my first build and I am unsure if I made a mistake or if this is something I can ignore..
Answers
-
I mean, I just took a look at my system and Chrome is currently utilizing more system resources for me than AutoCAD is, by a factor of 3.
-
It could be a couple things like your drivers being out of date or reseating the GPU on your motherboard.
-
I see. Should I just attempt to reseat the GPU again?
-
Good afternoon @theBatman360
Thank you for contacting micro center. I do apologize you are having issues with your system. For the computer you could try to reseat the video card itself. One thing i wanted to check was for your monitor, this is directly connected to the video card?
-
I would and before you reseat the GPU take a look at the contacts and see if there is any obvious damage to the contacts and then give the slot a dust with some canned air.
-
Yes, I have my monitor plugged into my GPU with a HDMI cable
-
Thank you for the help. I took a glance and nothing was obviously broken or anything like that
When I run my PC now I notice some new things now:
- My CPU clock and fan speed are now at max speeds although temps and loads are low
- My GPU load is still going back and forth between 1-25% at idle with temps remaining low
I am researching this problem online and have tried a few things like fast boot, stopping all nvidia tasks and checking task manager but am still stumped
-
- What CPU Cooler? Is it an AIO? Are the fans on the CPU header?
- What's actually utilizing the GPU in Task Manager to hit 25%?
-
- CPU Cooler is AIO. and plugged into AIO Pump on my mobo
- There is nothing in Task Manager higher than 225 MB running, which is by the Antimalware Service Executable, which I ended by turning off some settings in Windows.
-
Try: NVIDIA Control Panel → 3D Settings → Manage 3D settings → Global Settings → Click "Restore
My thought would be something is set that's causing dwm.exe to spool up the card continuously.
On the CPU. AIO fans connect to the CPU_FAN header, correct? What motherboard?
-
I restored to defaults with no change..
The AIO fans are connected to the CPY_FAN header. The mobo is an ASUS Rog Strix B550-A Gaming.
Assuming I didn't reassemble anything incorrectly and my PC is booting up just fine, I'm not sure what the problem could be.
Before reseating my GPU, and safely reseating a RAM card and m.2 ssd while the pc was grounded, my PC was running at 0-5% loads on idle for both CPU and GPU (only wallpaper engine running), temps around 30, and low clock speeds. What could have changed my CPU clock to max out and for my GPU clock to spike randomly and suddenly have high loads when idle?...
-
Either something is spiking with enough load to 'wake' them up constantly or a power saving feature is disabled. I'd load your factory defaults in your BIOS. Load DOCP as then save and exit.
Categories
- All Categories
- 1 The Blog
- 1 What's Trending
- 7.3K The Community
- 3K General Discussion
- 101 New Members
- 778 Consumer Tech
- 191 Prebuilt PCs and Laptops
- 152 Software
- 30 Audio/Visual
- 50 Networking & Security
- 4 Home Automation
- 5 Digital Photography
- 12 Content Creators
- 27 Hobby Boards & Projects
- 75 3D Printing
- 83 Retro Arcade/Gaming
- 59 All Other Tech
- 278 PowerSpec
- 2.5K Store Information and Policy
- 140 Off Topic
- 37 Community Ideas & Feedback
- 595 Your Completed Builds
- 3.6K Build-Your-Own PC
- 2.6K Help Choosing Parts
- 302 Graphics Cards
- 316 CPUs, Memory, and Motherboards
- 134 Cases and Power Supplies
- 50 Air and Liquid Cooling
- 46 Monitors and Displays
- 88 Peripherals
- 57 All Other Parts
- 60 Featured Categories
We love seeing what our customers build
Submit photos and a description of your PC to our build showcase
Submit NowLooking for a little inspiration?
See other custom PC builds and get some ideas for what can be done
View Build ShowcaseSAME DAY CUSTOM BUILD SERVICE
If You Can Dream it, We Can Build it.
Services starting at $149.99