-
Please Build A Micro Center In Omaha, NE
I think that you should build a Micro Center In Omaha, Nebraska because of these reasons: 1. The only place to get parts for computers in Omaha Is Best Buy and they only have 3 kinds of GPU's. 2. I know that a lot of people will go there to get pc parts, tech repair, etc. 3. Please don't take this as a bribe and I will be…
-
Need Help Choosing Parts
https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=b3b1be04-ec17-4ce8-8027-597d8b9d5cb2 Hi all, looking for some advice on this build. I've only ever built 1 PC and that was half a decade ago. I am pretty set on the GPU and wanting 64 GB of ram, but I'm unsure about all the other parts. I enjoy playing a…
-
AIO PUMP reading in Bios reading >8000RPM ASUS Prebuilt
Hello, I recently bought an asus prebuilt from microcenter a month ago. ASUS ROG Strix G16CHR-MS776S Gaming PCIntel Core i7 14th Gen 14700KF 2.5GHz Processor; NVIDIA GeForce RTX 4070 Super Dual 12GB GDDR6X; 32GB DDR5-4800 RAM; 1TB Solid State Drive However, when i go to my bios setting. I saw that my AIO Pump speed is more…
-
Need Help Choosing Parts
I want to use AMD CPU/GPU and I want to stay air cooled. These are the parts on the list: Ryzen5 7600X —— RX 7900 XT — Gigabyte B650 Aourus Elite AX ——- Gskill Trident Z5 32 GB —— Crucial 4TB drive —— Thermalright Peerless assassin 120SE MSI Mag A750 BE 80+ Bronze ATX Semi Modular
-
Powerspec g722 cannot turn off lights
I have literally tried everything. MSI center and mystic light, scanning and M button holds and cycles, I even downloaded Open RGB and it wouldn’t detect anything. How on earth can I turn these things off. Even checked the BIOS to see if there were any settings and that just had an LED control toggle. I’ve tried praying to…
-
Atari RetroPie Image
Greetings, Somehow my Atari image became corrupt and I can no longer access it or the original image to restore it. Is there any chance for someone to resend me the download link so I can reimage my SD card? Thanks in advance! Brian
-
Installing the latest RetroPie image with the Atari Games Card
A new Atari game image for our Atari Games SD card and Atari Raspberry Pi Kit went live this week,
so those of you who have already built a system with our card can now install
the new image. This particular image adds about 30 new games, including several from the
Atari 5200 library. As future updates become available…
-
Atari 32GB SD Card and Atari Fight Sticks
Oh hi, TL;DR; Thinking of doing a community project to support the lack of support from MicroCenter. I recently inherited an Atari Fight Stick (no trackball) and decided I would finally pick up a Raspberry Pi 3+ to install into my Atari Fight Stick with Trackball and while in the process of setting it up when I decided to…
-
I was wondering if i could ask for a location?
I would really love a location in Tempe/Phoenix Arizona. Fry’s is gone and always wanted a micro center. I would really appreciate it. I’m in Tempe so would love a location here. North Phoenix is so far from me so would love to have one down here! Ive been wanting this location for so long. Thank you so much!
-
Micro Center at 4531 E Thomas Rd, Phoenix, AZ?
I'm sure this question has been asked before, but is it true that there will be a future Micro Center at 4531 E Thomas Rd in Phoenix? There are multiple Reddit posts, a permit posted at the building mentioning Micro Center, and a pdf from the company behind that strip mall mentioning an upcoming location.
-
Can someone fix some issues on the "Inland Parts Pack Components Kit" document?
I graduated with EE in 2012 and have done software since then. I've wanted to get back into electronics. So I bought a RPi 5 and the Inland Parts Pack Components Kit to get my breadboard skills back up. I've since realized that kit's instructions are for Arduino etc, but shrug, they're pretty easy to adapt so far. There…
-
Can Someone Make Me A 5090 Gaming Pc Part List (All Parts From Microcenter)
List The Parts
-
Need Help Choosing Parts
Hi. How does this look? Would you change anything? Thanks! https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=ded88f37-651e-4864-9514-92aeeff64e58
-
Microcenter sucks
I paid for them to set up my computer. They couldn't do it. They did install windows 11 on the computer and used the cord that came with the hp laptop. But, they did not return the cord to the box before sending me home with the computer. I'm just trying to get my Microsoft account set up on this. They made up an email…
-
Micro Center Sucks
I paid for them to set up my computer. They couldn't do it. They did install windows 11 on the computer and used the cord that came with the hp laptop. But, they did not return the cord to the box before sending me home with the computer. I'm just trying to get my Microsoft account set up on this. They made up an email…
-
PowerSpec CG237 Chassis
How to install 2.5 SSD drive: Things you’ll need: SATA data cable Four M3 screws Phillips screw driver (Sizes 0-2) Make sure the system is powered off before adding SSD Get the SATA data cable from the accessory kit. 2. Unscrew the two screws on the back-side panel and slide panel off. 3. Locate a SATA power cable that is…
-
never received the 24 dollar coupon after submitting my pc build
I submitted my pc build in the community forum but never received the 24 dollar coupon promised. please help https://www.microcenter.com/site/content/build-dashboard.aspxError
-
Game freezes at 42% RAM usage...
Recently while playing Destiny 2 (Microsoft PC version), I discovered my computer doesn’t appear to be utilizing all its RAM. The game freezes consistently at 41% usage. Here is my build: i5 12600 Gigabyte B760M Aorus Elite AX Corsair Vengeance 32GB (2X16GB) 5600MHz DDR5 (I realize my chip supports 4800MHz) Corsair RM750…
-
Santa Clara Micro Center opening schedule?
I saw some others note that the Santa Clara Micro Center had an early access opening this week and people have been able to go inside and buy things for the last few days. I'm hoping to swing by tomorrow but it's not clear to me if it will be open and there is no phone number to call the store. Anyone with information on…
-
Help building desk workstation
For the sake of minimalism and functionality, i wanted to make a dual-chamber desk PC using the Lian Li Dk-07x and the case. I saw it has the space to fit 2 microATX motherboards. I wanted one for gaming and the other for streaming/content creation. Thats as far as my knowledge goes, can I ask for help on what parts I need…
-
Need Help Choosing Parts
Just wondering if there are any issues with this build and maybe compatibility issues. Not familiar with PSUs or AIO radiators. But I have attached what my current build would look like.
-
Nashville for a store
Nashville is one of the fastest growing markets in the country. Many tech companies are using this area as a primary or backup operations site to avoid coastal target cities. Several broadcast networks have relocated to here. Facebook has a datacenter in Gallatin. There are other datacenters being built around here. When…
-
The AMD Radeon RX 7600 Launch - 1080p Gaming Starting at $269!
Written by Sean Mekinda The next graphics card in AMD's 7000 Series lineup is here! The Radeon RX 7600 is designed with 1080p gaming in mind, delivering 100+ FPS in top esports titles at max settings. It even supports 60+ FPS in AAA titles at high settings, making it a fantastic option for anyone looking to build or…
-
Early Access - Santa Clara Grand Opening
I received a text that the Santa Clara location is doing “Early Access” on 5/28, two days prior to opening day. I clicked on the link but did not see a registration to complete. Is the early access for all or is there a registration to complete?
-
UCG-Fiber at Micro Center
Hello, Will Micro Center eventually carry the Ubiquiti UCG-Fiber device? I have a gift card I would like to use at Micro Center for this device, but I have not seen it in stock. Adam
-
When will MC Stock the Ubiquiti UCG-Fiber Gateway??
Been waiting months for MC to stock this and only buy all my hardware from you and now im tired of waiting!!! Anyone here might have an answer when you might sell/Stock this item?? Thank you
-
Powerspec G434 - Glass Slider Shattered
I dropped the sliding glass cover (only about 3 inch drop 🤦♂️) and it shattered. How can I order a new one? Thanks!
-
Need Help Choosing Parts and Compatibility
So I'm trying to rebuild a pc, i bought an Alienware PC back in 2020. Is called Alienware Aurora Ryzen Edition R10. But I'm trying to dissemble it and get a new case, CPU cooler, new motherboard, and maybe more ram…I'm trying to reuse the AMD Ryzen 9 5900 and RTX 3080 that it comes on the PC, it also comes with a 1000w…
-
PowerSpec BIOS Requests and Questions - Intel
Greetings, This a thread for our customers to request BIOS updates, or at least ask questions about BIOS updates and if new features may improve them system performance and reliability. Please post here with all questions and requests. We'll add the BIOS updates to this thread as they become available.
-
Need Help Choosing Parts and Compatibility
Hello, I just need to know if all these parts are compatible and if there are any recommended changes GPU Probably a 5070 or 5080 haven't decided yet CPU AMD - Ryzen 7 9800X3D Granite Ridge AM5 4.70GHz 8-Core Motherboard ASUS - X870E-E ROG Strix Gaming WiFi AMD AM5 ATX Motherboard RAM G.Skill - Flare X5 Series 32GB (2 x…
