-
Need Help Choosing Parts
I am on a budget of around $700 max after taxes. I currently play on an original 6-year-old Nintendo Switch, and it is becoming almost unplayable for games like Fortnite. I don't need like crazy insane fps because I'm not planning on going competitive, but I do like for my game to have at least medium to high range…
-
Need Help Choosing Parts
What is the best CPU-GPU-MB combo for building a home/gaming desktop computer? Computer only used to play 1 game War thunder. Want a cpu-gpu that has the best bottleneck combination. I thought the Ryzen 5 7600X with Radeon RX 7600 or a newer duo of the i5-14400f with RTX 5060. Both are in the Power Spec line of Gaming…
-
Need Help Choosing Parts
I got the rough idea of the pc I want, but I want to know if theres things about the build I should change most espically being whether I should get the 9060xt or the 9070xt. I would be using a 1080p monitor but plan to upgrade to a 1440p later this year. I don't know if I should stick with the 9060xt at a lower cost or if…
-
Ongoing Capture Card and Audio Issues – Elgato 4K Not Detected, Sonar GG Crashing Windows
Hello everyone, I'm hoping someone here can help me make sense of the issues I'm experiencing. Specs: CPU: AMD Ryzen 9700X RAM: 32GB Motherboard: MSI Tomahawk GPU: RTX 5080 OS: Fresh Windows install with a brand new activation key Internet Security: Bitdefender Internet Security I recently bought a brand-new Elgato 4K…
-
New To Microcenter
Im looking to set up a client in MN, with 2 pcs, for pickup, but i want to buy the pc, then have some ram installed… is this possible at this location, how does one start this process?
-
NVIDIA GeForce RTX 5090 Graphics Card for Custom Build
I'm trying to create a custom build and NVIDIA GeForce RTX 5090 Graphics Card is not an option. Is it possible to custom build with a NVIDIA GeForce RTX 5090 Graphics Card?
-
Need Help Choosing Parts
https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=8f271a9d-d04e-4a74-9772-4f498c026408 Looking for opinions on this parts list. I'm looking to spend under $1k on a build, so please let me know if I should change it up entirely or what.
-
Can I upgrade to Windows11(PowerSpec G428)
ASRock Z270 Gaming K6 Micron_M600_MTFDDAY512MBF NVIDIA GeForce GTX 1080 Ti Intel Core i7-7700K CPU @4 .20GHz/ 1151 Please advise as what I can do now that Windows 10 end of service.
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=d4b4c356-854d-4dc4-b62a-e8030ad02833
-
Need Help Choosing Parts
I have a budget of around 1000 dollars I can go over or under, but I just want to play high end games at 60-120 FPS and also be able to develop my own game. My preferences are, AMD GPUs and CPUs, single color scheme (Preferably white but idc), I want plenty of airflow, and I don't have to have RGB, but it would be…
-
Are these parts good?
i am wondering if these are good parts for a midrange gaming pc. demanding games i will prob be playing are minecraft with heavy texture packs, msfs, maybe legends of zelda (idk if thats high end). i will discover and download more games as time goes on. here: : (1) AMD Ryzen 5 7600X Raphael AM5 4.7GHz 6-Core Boxed…
-
Need Help Choosing Parts
Hey I just wanted to see if anyone can see an issue with this build, thanks for the any help! https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=61a1f078-593c-4724-9bf8-7a755459a75b
-
Micro Center at 4531 E Thomas Rd, Phoenix, AZ?
I'm sure this question has been asked before, but is it true that there will be a future Micro Center at 4531 E Thomas Rd in Phoenix? There are multiple Reddit posts, a permit posted at the building mentioning Micro Center, and a pdf from the company behind that strip mall mentioning an upcoming location.
-
Need Help Choosing Parts
I'm wanting to start building my own PC and I need some advice. I'm new to all of this so I'm learning as I go. My biggest problem I'm running into is picking a GPU and CPU. I want to do some high level gaming and productivity, as well as stream in the future. I'm not looking to spend a ton of money on the both of them but…
-
New Location Recommendation: Lehigh Valley, PA
Micro Center was and still is my favorite store to just go browse and get deals on PC parts and just a place to go for a while and get away from life. Now I live somewhere where there isn't one, but there is a prime location very close by that I think should be considered. Check into: 955 Grape St Whitehall, PA 18052 This…
-
Store Location Request
Would like to request or submit a location for a store. Jonesboro, Arkansas. The closest we had was a BestBuy that was destroyed in a tornado and they didn’t rebuild. (Nobody in the center did) They averaged $45million. There are no competitors.
-
Pc build help
My friend gave me his old gtx 2070 super and I wanna build a pc around that. I mostly will play Rainbow Six Siege so if i can run that closer to over 200 fps that would be great. My budget would be around $600. Also if possible make the build to be able to run a new gpu if I wanna upgrade from the 2070 super.
-
Compatibility
Using PC Builder, the compatibility filter is limiting the use of Corsair - RM850x 850 Watt Cybenetics Gold ATX Fully Modular Power Supply - ATX 3.1 Compatible. I can not determine why there's a compatability issue after reviewing specifications. Link to PC Builder:…
-
Washington State Locations
You seriously need to open some locations in the PNW. I miss microcenter... Seattle, Spokane, Tacoma.....maybe one or two middle of the state. But we need more presence here for pc parts and electronics.
-
Need Help Choosing Parts
-
Need Help Choosing Parts
I’m looking to play CS2 at 1080p, maybe 1440 I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=0ece9a16-6d85-40df-8c88-44b657b997e2
-
Need Help Choosing Parts
Thinking its time to get a new PC. The link is what I have parted out. I didn't include a GPU because at this time, not sure if I am going to go with AMD or NVidia so I am holding out right now. Figure I would get the PC built and hopefully I will have my decision by August. It may be a Radeon RX 9070 XT or RTX 5080 I will…
-
Need Help Choosing Parts
Is there anything wrong with my build, and is there a better Gpu I can get with total maxing at $1600? https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=cc0e9085-9c5f-4c84-9767-0bcbd06ca877
-
Free USB Stick?
I signed up for the emails a while ago saying there's a free USB stick for those who sign up. Now that the store is open I haven't heard anything about it. No email or text came through. Any ideas?
-
Need Help Choosing Parts
i honestly dont know it this is a good build, im just starting 😭🙏 https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=3f95ad99-3b32-475c-8771-64cd7a3abb28
-
Work pc - Micro Center Build
Work pc - Micro Center BuildWe guarantee your satisfaction on every product we sell with a full refund in accordance with our return policy – no receipt needed if you have a Micro Center Insider Account. Read the full story here
-
Photo library - Micro Center Build
Photo library - Micro Center BuildWe guarantee your satisfaction on every product we sell with a full refund in accordance with our return policy – no receipt needed if you have a Micro Center Insider Account. Read the full story here
-
Be our guest - Micro Center Build
Be our guest - Micro Center BuildWe guarantee your satisfaction on every product we sell with a full refund in accordance with our return policy – no receipt needed if you have a Micro Center Insider Account. Read the full story here
-
I just wanna know if this is a decent build i made for almost less then 700 bucks
let me know if its decent or not😁
-
Is this a good part list?
Hello, I bought the Corsair Vengeance i7600, and I am not pleased with it due to constant crashing, freezing, and black screens. Before I return it, I am going to try and build a PC that is able to handle my needs, such as gaming, streaming, and video editing. I am unsure if this is all I need to replace my current PC. I…
