-
How can I add a 3.5 hard disk drive to my B751?
I found where the drive lives, but am not sure where to plug in the data cable on the motherboard.
-
Bios Update supporting my CPU
I have a Ryzen 7 3700X and a Gigabyte x570 aorus elite and wanted to wanted to know what's the lastest bios update I can update too that still supports my CPU, I can see that gigabyte recently released Bios "F39" but had no clue if that bios update supports my CPU. Any answer would greatly help me out.
-
Mobo BIOS Firmware / G446
Seems the firmware on the powerspec BIOS does not really align with what is available for the retail board. Is there a source for the firmware or am I missing something obvious???? G446 Current BIos: Model: E7D251IZ1 version VA.MF On their site the version that gets downloaded is: E7D25IMS version: VA.H0 Model mismatch…
-
First Build (Budget <$850) should I go for higher graphics card and CPU?
CPU- AMD RYZEN 5500 MOTHERBOARD- ASUS PRIME B550M-A WIFI II MicroATX AM4 MEMORY- CORSAIR VENGEANCE LPX 16 GB STORAGE- WESTERN DIGITAL BLUE SN570 500 GB VIDEO CARD- POWERCOLOR FIGHTER RADEON RX 6500XT 4 GB CASE- LIAN LI LANCOOL 205M MESH MicroATX Mid Tower POWER SUPPLY- THERMALTAKE SMART 500W 80+ OPERATING SYSTEM- MICROSOFT…
-
How does this stack up?
I'm building my first PC and after my research, and a ton of youtube videos, I came up with this build. I'm trying to have a decent entry to mid build and to not spend more than 1.6k. From what I've seen I know that I want a 7700X for a CPU and a RX 7800 XT for my GPU. Everything else is still kind of foreign to me but I…
-
Merged: Micro center Charlotte
This discussion has been merged.
-
Merged: Charlotte Store opening !
This discussion has been merged.
-
Merged: I received an "Early Access" for the Charlotte store opening but ....
This discussion has been merged.
-
Merged: Excited about the NEW Charlotte, NC Store, BUT
This discussion has been merged.
-
Merged: Charlotte Nc
This discussion has been merged.
-
Arizona, when?
Please, y'all. Dying to get some love out here in AZ ever since before Fry's shuttered their doors.
-
Receipt Retreival
This discussion was created from comments split from: Old Receipt Retreival?.
-
Games won't fully load
I built my PC myself and I've been trying to play Rainbow Six Siege and Minecraft recently but every time the game starts to load then the game will stop loading and crash. Can anyone help? Thank you!
-
Open a Store in San Antonio...PLEASE
I registered just to post this. Just finished up at the Dallas location shopping for a few parts I needed while I was in town for 24 hours. For God's sake, PLEASE give us a Micro Center in San Antonio. I'm tired of only being able to experience the in-store magic that is Micro Center when I happen to be in Houston, Dallas,…
-
Question re: Lian Li ATX205 for PowerSpec G436 build
I purchased the G436 back in January 2021 and with a few modifications it's been a very good system for me. I would normally build my PC but as you may remember back during the height of Covid there were literally zero decent GPU's to be had on the open market and buying a pre-built was the only way to get ahold of the…
-
Need Help Choosing Parts
I would like to have microcenter Minneapolis build me a gaming rig in 2 weeks, it would be easies if all parts were sourced at microcenter. I currently play RDR2, Destiny 2, Horizon Zero Dawn, Hell divers 2. My old 1070 is dying in my current 6+ year old pc. I would like to keep the build at $2K (before the build fee). I…
-
Halot mage pro settings for inland water washable resin
I have had my halot mage pro for about a month now and my prints are ok but they could be better. I was wondering is there recomeded settings on the Halot mage pro for Inland water washable plus white resin? In particular I'm looking for print settings Thank you in advance
-
Need Help Choosing Parts
Hi- I took my son's preferences and built this computer. He is a gamer and will need a good computer for editing short films for school. I don't know what I'm looking at. Looking for mid-range gaming desktop. Important to my son- high FPS, attractive, ease of use.
-
Is it possible to bring in PC parts for Micro Center to test?
I recently bought a used 7800X3D and ram NOT at Micro Center, and was wondering if there was a service that allowed to me to see if these parts were fully functional.
-
Huntsville, AL - Suggested Store Location
Hi! I would like to suggest Huntsville AL for a new store location. We have a pretty tech-savvy town here with little options in terms of electronics stores. We are heavily growing with like the country's third highest technical workforce. Companies are swarming in. Micro Center would be a fantastic fit in Huntsville.
-
Ram stick
I have purchased a teamgroup delta ram in 2/24/2024 today one of the ram is not working is there any way will i get a exchange ? I dont have any plan
-
How to use the Dell Protection Plan (4 year)
We purchased a Dell in February but has recently started acting up. We received the marketing brochure with a QRC but turns out its to more marketing literature. How do we reach out to Dell to use the protection plan on this new PC?
-
PowerSpec G472 - random reboot from BugCheck
My computer worked flawlessly for 5 months. Then, 4 months ago, suddenly does random blue screen incidents and takes 7 minutes to reboot, whether it does it or I initiate the reboot. Done 2 Windows re-installs and several command prompts via chat by Microsoft. I'm still getting the random restarts, though now it reboots in…
-
Mayfield Heights Micro Center Staff Outing @ Top Golf
-
Redragon Buying Guide - High-Quality Peripherals, Budget-Friendly Prices
Written by Sean Mekinda Last year, we got to sit down with the Redragon Devarajas (Brown Switch) and were thoroughly impressed. Since then, Micro Center has vastly expanded our Redragon offerings, opening up a whole range of budget-friendly, high-quality peripherals. So, let's take a look at what you can do to upgrade your…
-
G443 seems broken with Hyper-V
Hello, I have a PowerSpec G443 and pretty much since buying it in October, I've been fighting nearly constant "soon after login" freezes for about two minutes, occasional full hard lockups, and CLOCK_WATCHDOG_TIMEOUT blue screens. I brought the machine in to the local Micro Center, and they ran a bunch of diagnostics and…
-
Logitech G502 Hero Mouse... the BEST Value Gaming Mouse We Carry
I understand that choosing a mouse is tricky sometimes. How it fits in your hand, how heavy/light it is, the feel of the buttons are all personal preference. But, The Logitech G502 Hero at $44.99 (on 8/31/2021) is the BEST feature for feature gaming mouse for the money we carry right now. I'm on my second one and purchased…
-
PowerSpec Warranty Question
If I have an issue with a PowerSpec prebuilt, is it necessary to bring the unit to the store? I have a bad DIMM. Was getting constant bluescreens. So I checked the memory. It tested bad on Memtest86, and when I swapped it out for another stick from one of my other machines, everything tested fine. I was told I need to take…
-
inland kb21 software
hi, does anybody have or know where i can find the inland kb21 software that is advertised in the manual? i looked at the pcb and used the microchip code and found another product called the nx-19 which the software did work but im unable to change the top row of keys. does anybody have the official inland software for it?
-
Powerspec G443 Bios update
Hello, I was updating drivers to the computer and also updated the BIOS to the current MSI version. I didn't realize Powerspec had a custom bios and would like to go back to this. I found a thread that had a similar issue (see below). But, when I download the bios from this thread, unzipped the file to a USB flash drive,…
