Question for anyone who pops by here, how many fans does the Cooler Master NR600 MasterBox have? link: https://www.microcenter.com/product/606985/cooler-master-nr600-masterbox-tempered-glass-atx-mid-tower-computer-case---black
At the end of the summer, roughly, Ill be heading off to a new state for school. I currently have a build that is a little out of date and showing it's age, but more importantly it is in one of the older Corsair obsidian 950D cases. The big ones thats like fifty pounds before you put a PC in it. So I'm looking to make a…
Hi all,I'm in the process of planning to move/build a computer in a kitchen cabinet. I plan to cut holes (with a hole saw) in the side of the cabinet to allow fans to move fresh air through the cabinet. I had the idea to use the power supply as one of the intakes so I can get away with one less fan. Does this sound like a…
Silverstone site said US stores should get them last week or this week anyone if they drop yet or when will microcenter drop ?
Does anybody know if MC sells just the glass panel? In case accidents happen.
I recently took my PC to another place to put in a new liquid cooling unit, and they're telling me that my current cooling fan/unit is stuck to my motherboard and they don't want to try to remove it for fear they will damage my motherboard. What should I do?!
Hello, i'm planning a new build and thus looking at new cases and trying to balance good airflow and hopefully quiet fans. my goal is to have quieter case compared to my current case and have been looking at the lancool 2 mesh performance or the phantek p500a (if i can even find them anywhere) but my main concern is how…
I have an EVGA RTX 2080 Super, and it's been getting really hot, and hovering around 85°C (in games only, e.g. Red Dead Redemption 2). I have to keep the fan speed cranked really high to keep it in check. I'd like to know what the best cooler available is. If you have suggestions please let me know! You can also PM me on…
My powerspec 850 W Gold is making a loud whining noise. Is there anything that can be done about this?
I’m considering of getting my first new pc case with some fans to go with it. I’m hoping for some kind of discount on the Lian Li o11 dynamic (white). It’s the same price all over the internet.
Hi folks,Do I have to have a 8 pin and 4 pin cpu power connectors from the psu to run a R5 3600 with PBO and XMP enabled?The hope is to eventually upgrade cpu and gpu. From what I've been able to find a 650w psu should be able to handle the load. However, the mobo may require the added 4 pin cpu power. Thanks for your help.
I am in the process of choosing a case. I want good airflow because I don't plan on using water cooled. I have decided on either the Be Quire 500dx or the Lain Li Lancool II Mesh. Which would be a better choice? Is the one that may be better?CPU will be Ryzen 7 3700 and the GPU for now either 1660 super or RX 5700
So, I'm building a new PC, and I have every part other than the CPU (which I'm hoping to get on the 5th with the new Ryzen launch), and I've started trying to put some thought into how to set up cooling on it. My case is a Phanteks Enthoo Pro - http://www.phanteks.com/Enthoo-Pro.html The case, in the layout I'm using it…
Hello, all. First time builder here, and I have a question on fan/radiator config. I like the look of the three 120mm RGB fans on the front of my Lancool II Mesh case and would like to keep them there, but for the AIO cooling, my MC rep suggested I go with the NZXT Kracken X73, which has a 360mm radiator that wont fit on…
Looking for information thanks.
Hi guys, Im wondering push/pull config will have more cooling effect and should I use the same fans series for my radiator?
Hello,I've been planning a custom PC build for a long time but I need a couple of small, custom aluminum brackets -- strips really -- for mounting a liquid reservoir, powder coated white, bent to insert into a slot, etc., etc.Problem is, I can't really make them myself. Does anyone know of a place in the Denver metro (or…
I think I have to take notebook apart to replace battery. is this correct?
Hi yall, right now i have a 850w psu gold+ and im planning to build a water cooling loop cpu and probably gpu if i can get RTX3080 soon. So will it be enough and a bit of head room of my 850w or it need more? I might OC. Please help i need your help asap
bought a powerspec psu less than a year ago. After about 8-9 months of use i came home one day to find out my computer wouldn't boot. Did the paperclip trick to see if it was still functional. It wasn't. Ended up buying a new corsair psu. Noticed it had a 1 year return policy written on the box. Can i just take it to my…
Have an "older" powerspec case build, G428. Going to be upgrading the GPU in the somewhat near future and wanted to get the temps down to reasonable levels first. I have new fans on the way, but does anyone know if these cases can mount a radiator up top for an AIO? It looks to have a large top vent. Thanks!
Planning on building a PC inside a Lian Li Lancool II Mesh, and noticed the price jumped from 89.99 to 99.99. As I am going next week, it might go back down, but I am wondering if they could price match it back down when I buy it. Anyone have any insight onto if I can do that?
Hi guys, do you guys have any idea about rgb or led or lightning psu cables that good on the market?
Suffering from "paralysis by analysis" when choosing a new case for my upcoming PC. My current PC does not have enough "horsepower" for the new Star Wars Squadrons game. My old rig is powered by i7-6700k with no overclocking since I could only find a B250 motherboard because my old power supply fried z170 motherboard. Here…
Does Microcenter carry molex mini-fit jr terminals. Needing to make some cables but can't find them on the website. Specifically molex part # 39-00-0038 Been calling the store for 2 days but can never get anyone to answer the phone. -thx
Just wondering if the third PCIe slot typically located at the bottom of ATX motherboard can be populated in the Lian Li Lancool II?
Hey, I was wonder how the built-in NZXT h510 case fans connect to a Molex connecter on the power supply. I'm confused because the case fans have 3 pronged plugs for each fan, but the power supply has two Molex connectors.
This is my psu- https://www.microcenter.com/product/485311/powerspec-550-watt-80-plus-bronze-atx-non-modular-power-supply I was on a LinusTechTips forum and they were saying how the psu I bought was a cheap d tier psu that can potentially wear down and take my components with them as well as cause some degradation to them.…
Hi, I have a question. Does Micro Center happen to have the NZXT Z63 Liquid Cooler in stock right now? Thanks!
Rog Ryuo 240 radiator ok for an i9 10850k/Rog z490-e gaming board?
Submit photos and a description of your PC to our build showcase
See other custom PC builds and get some ideas for what can be done
Services starting at $149.99
