-
Case Fan Question
I only have one spot in my case(92mm) where I can put a case fan, so is it better to have one intake case fan at the back, or a exhaust fan at the back? (my pc is ASUS ROG Strix GA15DK Gaming PC and changed the case fan from the default to a "be quiet PURE WINGS 2 Rifle Bearing 92mm Case Fan" that can be found in…
-
will certain parts would work in a new case?
So I have a prebuilt pc it is a acer predator orion 3000 and the cooling system is not the best on this computer. I was wondering if I could upgrade to a bigger case but i found out my mother board is a micro atx and I want a full tower case so I need to get a normal atx motherboard to fit the bigger case I have the two…
-
I just built my third computer and it doesnt boot
any idea how i can trouble shoot this because i have tried everything i can think off and nothing happens. The motherboard rgb lights up but nothing else turns on when the power button is held down.
-
Wiring Diagram and Example code for RPI 4-Channel Relay Shield
I just bought the "Inland RPI 4-Channel Relay 5V Shield for Raspberry Pi/ CE Certification" from Houston branch recently. It is a nice relay board to use on my Pi 3B+ and 4 following the reviewer code from one of the product review. But this HAT occupied all 40-pin without exhausting every GPIO pin. I would like to…
-
Rgb fans not working properly powerspec g470
I'm having an issue with my back and front fans rgb not working properly, the cooler works fine just nothing else. If anyone's had a similar problem or could provide some ideas I would appreciate it.
-
Room RGB
Just wanted to get an idea on what folks are using for room RGB control and sync. I saw COrsair touting Nanoleaf control with iCue and it made me curious what combinations are working for people out there.
-
Building Custom PC with own parts with Micro Center
Hello, If I purchase ALL of my components outside of Micro Center and bring them in myself, will Micro Center still be able to build the PC for me?
-
intel Logo Intel Core i7
do you have the free ASUS Z590-PLUS TUF Gaming WiFi Intel LGA 1200 ATX Motherboard with the purchase of intel core i7 ?
-
Latest Lian Li firmware update troubleshooting
Hi all, I just finished a build for a customer, and wanted to pass along something I found that you may run into if you haven't already. A recent Lian Li Uni fans controller update may show signs of not working after the update, you may get a message stating that the controller cannot be found. I was able to narrow this…
-
Need help locating this part. Lenovo PF37N48F ideapad 3-15ITL6 Laptop - Type 82H8 Machine Type: 82H8
This is for my monitor 40 Pin connector. Any help would be welcome
-
Can I get Specs & Warranty info for an Inland Professional 512 GB SATA SSD?
I have an Inland Professional 512 GB SSD installed in my computer in June of 2020. Serial # shows in System Info as 0C604C23. It's working fine. I just do not have the technical specs or warranty information. I'm trying to evaluate the health of that drive given power on hours of 6394 and annualized workload of 28.68 TB/yr…
-
ferrite beads, EMI chokes, etc.
Anyone know if Microcenter (St. David's) carries "ferrite beads", also known as "EMI choke"? Used to reduce high frequency electromagnetics, I want to power a motor with AC and need to run the cable through one of these things to knock out spikes. Thanks, Henry (username Raymondvillain)
-
How often does microcenter tend to restock there items?
I was hoping to buy an NZXT RGB and fan controller but there all sold out! I bought the last one but when we went to go pick it up and got home, it was already out of the box!
-
Need best quality modem/router for a 1 Gb internet service.
I've searched the internet and YouTube for the best quality modem/router for a 1 Gb internet service. What is the best and who has it?
-
Installation Of Home Fiber Optics Network
I need a qualified person with references to install a fiber optics and CAT6 network in my house. I need both wirings to be encased in electrical conduit under my house wooden floor. I live in the area of Pasadena, California. If you are someone who is capable of this or you know of a business that does this please reply.
-
Need help getting old IDE drives to show up in Windows 10
Hoping someone here can help / provide a missing piece of the puzzle for me. I have a lot of old IDE hard drives that I would like to copy the information off of (if there is any because TBH I have no idea what's on most of these drives any more). I purchased a Fideco USB3.0 to SATA or IDE adapter converter (because it…
-
Is the Realtek 8125B LAN interface incompatible with TrueNAS?
Checked with the expert desk before buying a MSI B560M PRO-VDH motherboard for a TrueNAS CORE (ver 12.0-U8.1) , but it looks like either they didn't know the integrated Realtek 8125B LAN interface is incompatible with TrueNAS --OR-- the MSI motherboard is defective (yes, I did check the BIOS to make sure the LAN interface…
-
Trying to find another one of these adapters I have at work.
I have this VGA to USB-B and it connects a Cognex Camera through the VGA and is also powered through the VGA with the USB-B cable to my computer. I really like to find another one.
-
Purchase more NZXT AER RGB Fan Connection Cable
Does anyone know where I can get more NZXT AER RGB Fan Connection Cables? I reached out to NZXT but they haven't gotten back to me. I can't find them online.
-
add a wireless network adaptor
can I add a wireless network adaptor to an older Dell Inspiron 537 computer for faster internet speed?
-
Looking for maximum ram for Toshiba Portege R500-S5100X
A friend gave me a Toshiba Portege R500-S5100X which is in perfect condition. Trying to decide if it is worth upgrading to keep. I know I can add an SSD but would need more RAM to make it work properly with Windows 10. It currently has 1 GB DDR2. Anyone know where I can find out how much RAM can be installed?
-
Cloning ASUS Small SSD to Larger SSD
Greetings, and Thanks in Advance for any assistance. Photographer and gamer, my SSD is full. All of my programs are not even installed because there isn't enough space. Decided to clone the SSD to a larger SSD. I cloned sector by sector using Macrium Reflect 8 Pro. The clone is reading in the bios as Windows Bootable…
-
External enclosures: NAS or RAID
Background: I'm moving from a MacPro workstation that has 4 internal drives. These are independent and I use Carbon Clone backup software. So...Drive 1: Mac OS, Drive 2: Mac OS Backup, Drive 3: my files, Drive 4: Back up of Drive 3. And yes, a large partitioned external for offsite backup. 3...2...1 plan. I'm moving to a…
-
pc wont boot
hello, I bought a full built yesterday and it wont boot. not light up nothing. 'm not sure what i did wrong cause I followed manuals and videos. I built it myself. should I take it back to micro center and have them fix it or is that not an option?? im confused cause im new to this
-
I bought the retail windows 10 USB key, however when I try to use it, it gets stuck on splash screen
I'm not sure if there is a reason for this or not, and This is my first build and do not have any other back up USB's I also do not have a monitor yet lol
-
I Want to get windows for my first PC build, but do not have a computer and dont want to buy it
I do not know any other methods, and I do have a big enough flash drive, I just don't know how i should get it via another method, is there a way that I can?
-
Cannot Format or Santatize NVMe SSD
I purchase an Inland Professional 2TB NVMe SSD to mount as a storage drive for my new Linux server build. I am using an ASRock DeskMini with a pair of 4 TB SATA SSD Drives in RAID1 for my build. I have installed Debian Testing (Bookworm) and the system is working fine. I have installed the NVMe SSD in the M.2 slot and it…
-
Inland Platinum 1TB SSD NVMe Speeds
Hi all, I was running a system performance test and got a notice saying my hard drive (C:) was performing well below expected. I have 2 identical Inland Platinum 1TB drives running as C: and D: I ran CrystalDisk on both drives and am including the results here. I'm not exactly sure how to read these results but it…
-
Creality CR200B parts
Do you have or can you order CR200b Heater block with down tube, heater and temperature sensor
-
Inland Height-Adjustable Gaming Desk Manuals
Inland Motorized Height-Adjustable Gaming Desk ET223-US63 - SKU # 010561 Inland Ergonomic Height Adjustable Gaming Desk HT811 - SKU # 445015 Inland Manual Height Adjustable Gaming Desk N02-22D-GB - SKU # 126920
