-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. However, I was planning on getting the 3070 when it goes on sale instead of the 2060 I have selected https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=ce588152-366c-45c7-801f-53357ab80d26
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. I plan on using it for gaming and streaming! I'll mainly be using a capture card and I'll rarely play big games (aka Fortnite, COD, MMOs) on my PC. Just looking for advice on compatibility and if there's a cheaper route since this is my first PC build.…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=8e6a7fc6-199e-4cca-9a8a-805df993f8f9 I'm really just looking into what I'll want in a few months time, and I plan for the CPU to actually be a Ryzen 5950x. With that in mind, I was just…
-
New builder any tips to make my life run smooth once I build my first pc
https://pcpartpicker.com/list/w2bw68
-
Need Help Choosing Parts
I put this parts list together and am looking some opinions/advice. https://www.microcenter.com/site/content/custom-pc-builder-intel.aspx?load=e89cc34c-f706-4872-8c8f-52ccae5ad1e2
-
Need help choosing parts due to "possible" fitting compabilities
I have the full build link on pcpartpicker at https://pcpartpicker.com/list/YMgLJf because micro-center doesn't have every part I need, but I am questioning on whether I can front mount my AIO on the case, In addition, whats the maximum GPU dimensions on the case and is there any other fitting compatibilities I have to…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. I'm a graduate Architecture (Revit, Photoshop, Illustrator, SketchUp, Premiere Pro) student that games/streams on the side (COD,FIFA,LOL). Any advice/suggestions would be greatly appreciated. This is my first pc build and I don't want it to be too large but…
-
How to best utilize Kraken fans
First time PC build, and I am planning on usiing the Krakeb 240mm CPU cooler, inside the NXKT H510 Elite case, which has case fans. Where would be the best location to put the CPU fans? Here's the build: https://www.microcenter.com/site/content/custom-pc-builder-intel.aspx?load=daf1bed4-a97d-4c50-b31c-c72f24263f0e Thanks!
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. It's my first PC build, and hoping to stream/game. Looking for high performance. I'll also choose a Full tower. Thanks! https://www.microcenter.com/site/content/custom-pc-builder-intel.aspx?load=78206fee-6401-4a0f-bbf4-3aaed907f0a5
-
Need Help Choosing Parts
Hey I need a budget pc for around 300-400 dollars and this goes above the limit, I can do it for more but is this worth its price? Or are there any better parts I can get that are better/cheaper? CPU/GPU (comes with stock cooler) https://amzn.to/2XwxDvf Motherboard https://amzn.to/2zUh6eq RAM https://amzn.to/2VZuB4V…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=4a7aa7dd-3d3b-482a-9e17-4c8f458a0c82
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=34745850-49c5-4e9b-8b0d-1f1d1dff3b17
-
Trying to figure out what kind of watercooler i need
I am looking for a watercooler for a new CPU im gonna buy but idk what watercooler will fit in my Apevia Aura S-WH Mid Tower and be mounted on the top vented portion of the computer. Looking to get a 3800XT Cpu or a 3900.
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. Looking to build a PC instead of waiting for the PowerSpec prebuilts to come into stock. From what I can tell this is what I'm interested in building. Don't need an i9 as an i7 is plenty enough for me. Heard 3200-ram is the sweet spot in terms of ram speed.…
-
Don’t know if this everything I need
I don’t know If I have everything on this list, and all of these work together. If someone could check that would be awsome. Here’s the link: https://www.microcenter.com/site/content/custom-pc-builder-intel.aspx?load=f0447ab4-d87e-4ff5-9465-5e3a35a76c55
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=8ddb6298-2c0d-4a7c-837a-cfd7c7ffbbe3
-
im looking to buy a pc for 1k for streaming and gaming and regular school work plz help
Plz help I have been viewing and learning all-day about how they work.This is going to be my first pc and I was looking for a build that had a ryzen 5 3600 and 16 gb ram plz help I'm confused on the graphics card and the ssd/ harddrives. If someone can make me a build where I can buy everything at micro center it would…
-
Should I go with 3200Mhz or 3600Mhz?
I’m building a pc primarily for great VR performance on an Oculus Rift S and I’m going to be using an X570 mobo with a Ryzen 5 3600 CPU. My question is two fold, is the 3600x or even 3600xt CPU worth it and which would you recommend and then secondly for the Ram I am planning on 16Gb as I’ve been told 32Gb will be…
-
Need Help Choosing Parts
I am at a crossroads. I want to upgrade my pc but I don't know how. I am thinking that I just will do an aesthetic upgrade. I am open to switching platforms for my CPU my specs are as follows. r5 3600x 2060 gaming x 32gb cl18 3600mhz ram. I don't know how to upgrade please help me.
-
I want to build my pc but I would like someone to help me when I have a question
I want to build my own pc myself but I would like for someone to be able to help me if I need it. Can you do this? If so, how and how much does it cost?
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=eb511cce-7b2c-4c29-b22d-0b08b9a0a3e3
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=e31b0127-8ca1-4984-a5b2-a1fd18ff813f
-
R5 5600x vs. R7 3800x
Hi, I am upgrading my pc soon and was hoping for some feedback regarding which CPU I should buy... The new ryzen 5 does have more IPC but still has less cores. The ryzen 7 has more cores and threads, but has less IPC. I am using my computer for gaming, streaming, video editing, and homework. Any feedback would be…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=45c9abe6-3b92-4702-8f62-539349ea7f8c Looking to build my first pc. Looking for advice if I need to change anything. Budget is 2000-2500
-
Need feedback on the parts that I chose.
Hi, this is my first pc build and I am looking on some feedback on the parts that I chose. . https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=1cb99425-1e86-4990-9fe7-925a1b8f5f9a
-
Building My First Gaming Pc
I need Helping choosing the Correct Parts for my first gaming pc build. My budget is $1500
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=9c0ca4d9-e9da-42bf-822a-05ef26fe2a00
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-intel.aspx?load=c3eefc58-eb95-46e6-8cfd-e8499a5d7bc1
-
Picking parts for my new computer
Hi! I'm very new here and need help picking parts for a PC build that I would put together. I mainly need it to have the capacity to run video and music editing software, and have plenty of storage, ideally between $500-600. Here are the parts I have so far: https://pcpartpicker.com/list/FqwXmg. If anyone can help or has…
-
Help with PC Gaming System
Hi, We are needing help with gaming systems. Due to the pandemic and our family being high risk for COVID, our son can’t compete in person on his high school eSports team. We are due for a new PC for Microsoft Word/Works anyways, but wanted to set up a gaming system as good but cheap as possible as money is tight so he can…