-
Help! My Atari Fight Stick top is delaminating
it hasn't been used much since i bought it, but I pulled it out of the closet and the sticker is totally bubbling up on the top. Has this happened to anyone else? Any suggestions to fix it?
-
Internal Wiring Diagram ?
I love this thing. I have a 8 gig RPI4 coming and want to add a few extra buttons. 2 Pinball buttons. LT and RT, and cant find a wiring diagram to trace colors. Anyone have one ?
-
Atari Fightstick trackball not working on Mac
I have the Atari 2 player USB fightstick with trackball, using it with OpenEmu on the Mac. The buttons work great. The trackball is connected and controlling the mouse on my computer, but it does not control anything in the game (tried with Centipede and Missile Command). Is there anything I need to do to set up the…
-
Atari assistance
This discussion was created from comments split from: Atari Fightstick with AtartiVCS.
-
Replacement Shock for Ultimate Atari Fight Stick with Trackball?
Hi, my wife got me an Ultimate Atari Dual Fight Stick with Trackball for Christmas from Micro Center. I love it, been spending every minute since then configuring it to my preferences. However, I kept noticing when raising the lid that it would continually gradually drop down on its own. Upon further inspection I noticed…
-
RetroPie image no longer supported! Cannot update~
The supplied Raspberry Pi 3B+ with the Arcade Fight Stick is on Raspbian Stretch and RetroPie does not support that OS any longer. How do I get the new version of RetroPie? @NickBiederman
-
Transfer Atari Games to larger MicroSD Card?
For Christmas, I got the Ultimate dual Fight stick with trackball console which also included the Atari games MicroSD card. I'm pretty excited to start setting up and playing with this thing. Before I even start setting this up, I would like to upgrade to a larger size MicroSD card than the 32GB. Can someone point me to…
-
Having a problem with Atari Fight Stick on Mint 19.3
Hi Folks, I have a problem using my Atari Fight stick with trackball on Linux Mint 19.3. Im able to get the trackball to work but cant get the controller to work. Fight stick has a xm-10 controller . Any help will be greatly appreciated.
-
Atari Ultimate Arcade Fightstick w/ Raspberry Pi 4?
Hi, I'm a newb to these retro controller games and could use some help. I think I've concluded that I want to go with the MC/Atari Ultimate Arcade fightstick, but go with a Raspberry Pi 4 instead of the included Pi 3B+. Here are some question I have. I believe this controller can be purchased without the Pi 3B+, is that…
-
Atari SD Card
I purchased the Atari SD card but I only get a black screen at boot. Can you help me? https://www.microcenter.com/product/627545/atari-32gb-micro-sd
-
Atari Arcade Fight Stick with xbox one Mortal Kombat
https://www.youtube.com/watch?v=gdwfH_1DHxY
-
Micro Center Atari Arcade with an Xbox Using a Cronusmax
heres a new video I posted a followup to the atari cab i got from microcenter.
-
Atari SD 32Gb Card: How to exit a game.
I recently got the Atari 32 Gb SD Card and it is a joy!. One question though - we can exit games on another RetroPie install by hitting Select + Start twice in a row, but it does not work with our AtarI RetroPi - and we haven't found another way to exit a game and get back to the game list other than shutting of the…
-
How Do I add Roms To The MicroCenter Atari Card?
How Do I add Roms To The MicroCenter Atari Card?( Just Purchased The Atari Ultimate Fight Stick and also purchased an extra Atari card with the adapter) I am looking to add Frogger, PacMan, and Donkey Kong.
-
Configuring the Xinmotek Controller with Retropie
Configuring the Xinmotek
controller with RetroPie is very easy, especially if you are using our
distro from the Atari
Games Card. If you’re not using our image, skip the first 2 sections of
this article and complete section 3 before completing sections 1 and 2. If you
are using out distro you only need to worry about…
-
Atari dual flight stick w/ trackball fit with MC 27” arcade cabinet.
Will the Atari dual fight stick with trackball fit into the Micro Center 27 inch arcade cabinet? I’d like to use it instead Of wiring my own controls.
-
Atari Fightstick with AtartiVCS
I just purchased the new VCS from Atari, and decided to buy the fightstick to play the games. The Atari unit sees the USB controllers being connected/disconnected, but none of the joysticks or buttons register with the unit. Has this been tested yet? Given they are both Atari branded, I would hope they work together.…
-
Atari - Marble Madness
Wanted to post this in Retro Gaming, but no ( +Post ) button. Before I purchase 'Ultimate Arcade Dual Joystick with Trackball 2' is there a way to find/load in SD card - the game " MarbleMadness " ?
-
Help with Daphne.
Hello, I think I've finally got this all setup except for one thing...Daphne. I got the module installed and two games added and working fine however, Daphne doesn't use the select/start exit so once you are in the game you can't get out. I've been digging around the Retropi docs but I'm a little lost on how to change the…
-
Overscan on MicroCenter Flight Stick with TrackBall.
Hi, Trying to figure out how to turn off the overscan on the Emulation Station UI. It's cutting off the elements from the bottom of the screen. I'm trying to set this up as a gift for a friend and I don't want to make this overly complicated for them. Cheers and thanks.
-
New Atari Pi Package does not recognize FightStick
Hey all, I have a new Atari Pi package (the games, a gamepad, 3b, etc.) that works fine with the controller it came with. But I also purchased the Atari Fightstick with the two joysticks and the trackball. When I plug that device in, the Pi won't even recognize there is a device connected. Any ideas on where to start?…
-
Atari fight stick cabinet kit
Ok, I have a question... I have both Atari fight stick with trackball and one without trackball both with a raspberry pi 3/4. I'd love to get the arcade cabinet for both of them but sadly I no longer live near the micro center that sells them and sadly they don't ship them. Have anyone else had this issue with these and if…
-
Full size cabinet power switch
I noticed in the installation instructions, the front panel has a rectangle hole cut and it’s labeled as an optional power switch. does anyone know what switch fits in that hole? It has to have been cut for something specific.
-
Atari Fight Stick 4-way controller upgrade?
Really need one of the sticks to be 4-way. I have an old Ultimarc balltop J-Stick that is 4-way/8-way adjustable but I don't think the holes lineup perfectly for the four bolts. What's a good stick that would fit better? Yes, I've heard the 8-way that's on this thing plays OK but ... I'm a competitive DK player. I need a…
-
Empty Atari Card
Can an admin help me with this. {I bought the bartop arcade kit. But when I go to boot it wont boot with the atari sd card, just a blank screen. Is there an image I can download to reflash this?
-
Photo of the Fist Raspberry pi 4's to boot Retropie Purchased at Microcenter
I got these at microcenter after a few community members alerted me to there stock. Bought in june 2019 and first boot was july 2019 a few days later. The Supreme team and I worked hard to make it happen for the community.
-
Arcade Cabinet Builds!
Hey all. I'm the new buyer for the Arcade Cabinet parts. I'm working on some exciting things that will hopefully be in stores in the next month or two. Assuming price point and quality are the top two requests, what else are people looking for in terms of arcade cabinet builds? What functions, controls, setups etc. 3/4…
-
No Audio via HDMI on Atari Retro System
Hello, I am having difficulty get audio to work through the HDMI. I purchased an Atari Retro Arcade Kite. I made the suggested changes to /boot/config.txt to force audio through HDMI but it is not working. Any suggestions would be great. Thanks Ant
-
Retro Gaming Introduction
Hey everyone My name is Kiodiekin I've been using retropie since 2018. in 2019 I was one of the first to help get retropie working on the pi 4 and have been apart of all the latest advancements in the community since then, Pi marquee, vulkan drivers, redream, dolphin emulator etc. I was also the first to create a pi 4…
-
Resetting controls to default.
I have the lovely Atari dual fightstick with trackball and Rasperry Pi 3B+. I am an old DOS and Windows guy and have not entirely made my peace with Linux yet. I had things working pretty well, then I messed with it. I have re-installed a couple times, but I just can't seem to get the controls back to defaults. Perhaps I…
