-
PowerSpec G438 Drivers
The driver lookup is not finding drivers for the G438 and the PowerSpec website does not have drivers. This system is only about 4 years old. Outside of looking up each component individually, whats the best way to find drivers?
-
CPU upgrade recommendation
I have an old PC (https://pcpartpicker.com/list/g48jwg) which is finally starting to slow down after over 6 years of use. I am assuming the CPU is the main culprit and am looking to upgrade. I have the following questions: Is it sufficient to upgrade the CPU or should I look into replacing the motherboard and/or graphics…
-
FYI - Some microcenter.com emails failing DMARC and being blocked
microcenter.com has a REJECT policy on it's DMARC. I seem to get most of them, but the ones that have the subject of "Thanks for your recent purchase" fail DMARC. These seem to be sent out through Amazon AWS SES service. You might want to forward this to your internal IT folks to sort out.
-
Bring back mix and match on bundles
Up until last week, on the website you were able to change the motherboard or ram in the microcenter bundles while keeping the discount on the cpu. Around the time of Labor Day, apparently this got changed (according to comments on the unofficial subreddit). I'm going to be moving for college in 1.5 weeks and I'll be near…
-
POWERSPEC G470 Status_access_violation on all browsers.
Started getting these errors on all browsers. I've reinstalled windows, reinstalled applications, reset cache. Any other ideas? Reddit seems to think that its CPU related. Here's an LTT thread - I don't have the artifacting though:…
-
Wire too tight
Bought a prebuilt from microcenter and the wire connected to the graphics card is too tight. When I push the clip, there's no room to wiggle it to come out. Along with trying to unclip it from the motherboard. I need to do this so I can add storage. Will microcenter repair this, since it's their mistake?
-
Has Microcenter looked into opening a Tampa Store?
I mean it's long overdue opening a store in Florida but in Miami at the moment is a long haul from Tampa. It's disappointing that the only option on the West Coast of Florida is a Bestbuy and their options are slim and limited. The only options outside of Bestbuy is Amazon or Mom and Pops shops.
-
Toshiba laptop battery
I'm looking for a replacement battery PA3534U-1BRS
-
Gigabyte B650 Gaming X AX v2 won't post
I just bought AMD Ryzen 7 7700X, Gigabyte B650 Gaming X AX v2, G.Skill Flare X5 Series 32GB DDR5-6000 Kit, Computer Build Bundle. The motherboard doesn't post no matter what I've tried. I've tried to unplug and replug everything. I've tried to switch ram slots. I don't know what to do. I'm thinking of returning the whole…
-
Need Help Choosing Parts
What is the current landscape regarding running 4 sticks of on current setup? (I am running up to return window. Currently only have one pair of the memory installed) AMD Ryzen™ 9 7900X3D X670E AORUS PRO X (2) TEAMGROUP T-Force Delta RGB DDR5 Ram 32GB (2x16GB) 6000MHz PC5-48000 CL30 Intel XMP 3.0 & AMD Expo White…
-
Amd rewards
I recently purchased the ryzen 7 7700x bunbundle with the gigabyte b650 and the rest of my pc build. I was just wondering why I didn't get the codes for the amd rewards?
-
Amd rewards?
I purchased a ryzen 7 7700x bundle with a few other items on saturday, it's currently monday.Monday. I'm wondering if you are participating currently? And if so, wwhy I didn't recieve a coupon code, and how we could maybe rectify that?
-
Trying to build PC for 1080p 144hz
Is this build overkill for 1080p any recommendations? https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=73254a48-c99a-4006-a480-1ce7662dd1af
-
Crashing with NVME SSD
I recently purchased an Inland 2tb Performance Plus NVME M.2 SSD from Micro Center. I installed Windows 11 on it and it kept crashing. The crash would be a sudden cut to black (no BSOD). After the cut to black, the PC wouldn’t turn back on until I cycle the power supply. This happens repeatedly. I reinstalled Windows 11 4…
-
Advice on Ram Upgrade & SSD addition
Hi Looking for some advice I haven't been keeping up on the tech stuff lately but I am looking to Upgrade my Ram and maybe add another SSD. I am mostly a gamer and aspiring Game Dev I just don't know what Ram my mother board supports and could use some help. I currently have: MSI X470 Gaming Plus MAX ATX Ryzen Motherboard…
-
ATSC 3.0 ( New digital on-the air ) standard inside Sony SKU: 732982 Mfr Part#: XR75X90CL (TV)
The title is the question. Is the tuner of the Sony SKU: 732982 ATSC 3.0 capable, or do I need to order another tuner as recommended by NextGen? Thanks, Jon jkliv01@att.net preferred, as latest gig involves driving to garages delivering auto parts- not usually allowed to answer phone…. Yes, I used to hold…
-
Need help for replacement CMOS battery on B500M-C MoBo
The battery is sealed and wired onto the motherboard by a plug. Is this a standard CR2032 battery, and does anyone know where I can get a replacement? Also, do I have to be concerned with passwords or other issues when changing out the battery? Thanks, Dave G.
-
Obtaining old receipt/invoice
I am suffering from Raptor lake CPU issues, attempting to file an RMA with intel but they are requesting proof of purchase. Unfortunately I did not save the receipt or order it online. Is there a way to get the receipt based on the serial number of the CPU?
-
Build submission pending for a week
Hi Micro Center, I have submitted a build showcase on Sept 1. Here is the preview link: https://www.microcenter.com/buildpost/46550/more-rgb-=-120-performance-gain-lolll?preview=yes It has been under pending for a week. Can you help to take a look? Thanks!
-
Add ReadyView cameras to HomeKit via Homebridge
I like the cameras and recording of the ReadyView NVR, but the iPhone app is not great, and the iPad app doesn't work at all. I hate to abandon the hardware so... I added the cameras to HomeKit using HomeBridge running on a Raspberry Pi 4. Info on setting up HomeBridge is available at homebridge.io and you need the…
-
AMD rx 7800xt free games
I bought an RX 7800 XT and it says there's a promotion to get two free games, I've requested my receipt as well as hit the button that request a resend of the voucher but i haven't received anything in my email
-
Why is my PC not working?
Hi! So I just built my first ever PC, but when I turn it, it doesn't give any signal to my monitor. The fans and LED's work great, but the fans on the graphics card don't spin. I've tried resetting the CMOS, but it didn't help with anything. I've also tried using only 1 stick of RAM, and cleaning the graphics card. Are…
-
Bambu Lab A1 Combo Extruder Issue
I just purchased a Bambu lab A1 combo and just finished putting it together. This is my 3rd printer but first Bambu one. It ran through all the initial self-tests, and I got to the home screen and the printer kept giving me an error message: "The toolhead is malfunctioning please restart the device." I scanned the QR code…
-
Master Key for Intel gaming days
Hello! I bought an Intel ARC GPU recently - but I can’t find the master key that Intel needs for me to qualify for the gaming days promo to get Assassins creed. Not sure how to get help with this. Thanks!
-
how do I make a new button profile for the Inland gm98 software
I cant find a user manual online and the software lets me set up the 12 button layout but i want to make another profile, the website says it can have 3 profiles but i dont see a way to make a new profile without overwriting the buttons i already set up… any help is appreciated, thanks.
-
Copy of receipt
Is it possible to get a copy of my receipt if I didn’t have an account at the time of purchase. I have the bank statement of the amount and date of purchase. I need it for my case’s manufacturer warranty.
-
Why is my ESET Activision code not working
Hi, I bought a Victus gaming laptop from Micro Center. When I turned it on I logged into my ESET Home. When I put my license key in it said that the license Key or retail Code I entered could not be found in the system. I've inserted all of my information numerous times and it still says the same thing. Help would be…
-
Need Help Choosing Parts - New to this
Im new to this. how do these parts look? https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=a1e00e39-f451-4d2d-b876-42db2a96b22e
-
Status of pc build tier 3 no service order given
Hello, I picked up parts yesterday, and changed my mind to have micro center build my pc instead of someone else But they never gave me a service number.. I have the tier 3 build on my recept for $250 Any help is appreciated It's unfortunate you guys do not have a call phone number for support.
-
Where is the AMD 2 free games Space Marine 2 and Unknown9 code?
I recently purchase a 7800x3d from Microcenter and can't find the code for the 2 free games. Usually the code is sent by email or on the reciept. It was advertised on the item that games come with the purchase.
