-
Inland Performance Plus 2TB 3D TLC NAND PCIe Gen 4 Firmware update ?
I've been seeing "recently" that the phison e18 controllers on these NVME's might have a bug in the firmware that slows down read speeds for older files. My performance plus drive is on M31.6 firmware revision, does anyone know if a new firmware revision is available? My results are definitely trending downwards for older…
-
Need Help Choosing Parts
$1200 Budget AMD Preferred White Build 1440p Gaming, mostly games like Marvel Rivals, Apex Legends, etc. That's mostly it, thank you if you help out <3
-
Need Help Choosing Parts
am i missing anything in this build? https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=8d40659d-6c0a-4eb6-888c-209f97a53e12
-
Installing the latest RetroPie image with the Atari Games Card
A new Atari game image for our Atari Games SD card and Atari Raspberry Pi Kit went live this week,
so those of you who have already built a system with our card can now install
the new image. This particular image adds about 30 new games, including several from the
Atari 5200 library. As future updates become available…
-
Introducing the Ultimate Atari Fight Stick and Ultimate Atari Fight Stick with Trackball
Today we launched the newest additions to our retro gaming
lineup: the Ultimate Atari Fight Stick and Ultimate Atari Fight Stick with
Trackball. We’ve been offering a USB 2
player Atari Fight Stick and 2
player Atari Fight Stick with Track ball for a while now, but the USB
versions only provide the controller. They need to…
-
Atari 32GB SD Card and Atari Fight Sticks
Oh hi, TL;DR; Thinking of doing a community project to support the lack of support from MicroCenter. I recently inherited an Atari Fight Stick (no trackball) and decided I would finally pick up a Raspberry Pi 3+ to install into my Atari Fight Stick with Trackball and while in the process of setting it up when I decided to…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=1d705460-75a6-4f15-a4c5-a5c34e3042cb
-
SD card appears to be corrupt in new Atari Fight Stick
Hello, I just came home with the Atari Fight Stick and I am not getting any video output from the pi3b. Within the fight stick, the PI simply lights up with a red LED but there's no output through HDMI. I used another sd card with a known good image for the 3b and it confirms that the pi is functioning properly with video…
-
New Ultimate Fightstick won't boot
I recently received an Atari Ultimate Arcade Fighstick as a gift. When I went to boot it up, I got nothing except the rainbow screen. I create a backup image, then installed RetroPie on the SD card, and the cabinet booted up just fine (of course, I didn't have any games and I'm not sure what controller files I should have…
-
Is there anyway to apply part-time for any upcoming positions at the store location in phoenix.
-
Need Help Choosing Parts
I'm looking for a decent build right now as I am running a 2060 currently. Here is the build: https://www.microcenter.com/site/content/custom-pc-builder.aspx/?load=c8109d84-210d-4b79-aa20-eaf392ebd84c
-
How to add P.O. Box?
Ok, I just recently ordered a webcam, and did see an option for a P.O. box. I am in college, so that's why I need to give the P.O. box number. I only realized the possible problem after I ordered. So I tried calling customer service. Though I didn't get a call because they were too busy. My problem with the customer…
-
G521 monitior and booting issues
After i reboot pc or shutoff or shutoff moniors (4)...the pc shows black screens. windows ctl shift b doesnt do anything. if i hold down power button and shutoff and turn back on pc works. any ideas? i tried bios and nvidia update and still issues.
-
Inland Clear Resin has a red/orange hue coming out of the printer
I have an Elegoo Saturn 4 Ultra (12k) and am trying printing in Inland Clear resin for the first time. The first 2 sets of prints have come out with a distinct reddish brown hue. It's noticeable coming from the printer, and more distinct after washing and curing. I cleaned the vat and the build plate thoroughly before…
-
How do I turn off these hideous fan lights?
I've spent many thousands of dollars and untold numbers of hours trying to create a beautiful home. Then one day the husband comes home with a new computer for me, except it's completely hideous and is the polar opposite style to my carefully curated decor. It's PowerSpec's G441. Surely there is a way to disable these…
-
Need Help Choosing Parts for Updated Gaming Build
Wanting to try an all white build after getting my first job, upgrading from a Ryzen 5600X, RTX 3060Ti, 32 GB RAM. I've got a 144Hz 1080p monitor currently, and I play mostly shooters (Valorant, Fortnite, Apex Legends), so consistent framerate is pretty important to me. I've gotten to consistent high (120-144) frames by…
-
B650M C V2 (rev. 1.0)
Latest Driver please. Thanks
-
how to add sata drives to powerspec g443
Just bought a G443, hooked it up and everything runs fine, I need to add the two HDD drives from my old PC into this one, however, I cannot access where the HDDs install. Removed the upper left side panel and the right side panel, can see from slots from the right side but cannot install the drives from the right side.…
-
Need Help Choosing Parts
I am curious why this message is appearing for the GPU. Is it not compatible with the other components? Thanks.
-
How to add 3.5" hdd to PowerSpec G912
Never mind, found another post with similar question.
-
Just a moment...
Just a moment... Read the full story here
-
Huntsville, AL - Suggested Store Location
Hi! I would like to suggest Huntsville AL for a new store location. We have a pretty tech-savvy town here with little options in terms of electronics stores. We are heavily growing with like the country's third highest technical workforce. Companies are swarming in. Micro Center would be a fantastic fit in Huntsville.
-
What are the differences between an Open Box and Refurbished Motherboards from MICROCENTER?
I see the same motherboard listed as an Open box but also have a refurbished one available what's the difference?
-
Powerspec B940 multiple random BSODs
Hello Team, I'm at my wits' end. Since November 2022 I have a Powerspec B940 (to which I added a GTX 4080, a better PSU and a couple of SSDs/HDDs) and it's been running smooth, stable and always fully updated until recently. For the past couple of weeks I've been getting BSODs of all sorts, mostly when running applications…
-
Need help on PC Building.
I'm planning to build a PC and purchase everything from Microcenter or online if it's cheaper, but I'm not sure which parts to choose. I already have an AMD Radeon RX 6800 XT and a 1TB Samsung 990 Pro. I'm aiming for a standard white ATX build without RGB parts unless they're more affordable. I’m considering the ASUS…
-
Micro Center at 4531 E Thomas Rd, Phoenix, AZ?
I'm sure this question has been asked before, but is it true that there will be a future Micro Center at 4531 E Thomas Rd in Phoenix? There are multiple Reddit posts, a permit posted at the building mentioning Micro Center, and a pdf from the company behind that strip mall mentioning an upcoming location.
-
Need Help Choosing Parts
https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=47e276b0-dad6-4a31-b8ef-e613ab4a2106 Hello all, New to the community here. I'm looking to build my first PC and am looking for any advice I can get on the current build I have going. I'm looking to build a mid-tier AMD build primarily for gaming but also…
-
How can I complete a non-profit tax exempt purchase of computers for my church?
I have on hold a couple of computers that I want to pick up in store and then purchase tax exempt. What do I need to bring to the store?
-
i have no idea if this will work
pls tell me how to make it cheaper without losing performance/whether these parts are compatible
-
Parts list
Good morning , I’ll be in Charlotte nc soon for work and wanted to get some new computer parts . Was thinking about this build , any suggestions or cpu ram motherboard combos or changes you recommend ? Wanting to spent 2500 cant post urls yet but this is the build link just remove the space pcpartpicker. com/list/BqPkNz
