-
We're having trouble registering this email address. Please try using a different email address.
Getting this error when trying to change my email address. My old one works but will disappear in a few months. my new one has a .fish extension. There are over 16,000 domain extensions so not sure how many are also facing a problem but if you can add .fish that would be great. I don't want a gmail, outlook, etc so if you…
-
In-store pickup of products from an electronics distributor like DigiKey or Mouser
I think Micro Center should partner with a company like DigiKey or Mouser to offer in-store pickup of their selection of products. The use case vs purchasing from them directly is as follows: Let's say you have this DIY electronics project that you're working on. You put it together, test it, and realize that you forgot to…
-
Need Help Choosing Parts
Is it a good build, my budget is around 1800
-
Need Help Choosing Parts
Hello, I'm a long time World of Warcraft Player, whos looking to make a new build to play in 1440p at max settings, id say i don't play many graphic intensive games, i play WoW, CSGO, and i dabble in some warzone, fortnite here and there. i don't want to go overkill for my PC. i was thinking a 4070 paired with a 7800x3d ?…
-
Policy on Getting Coupons Back after Returning
Hello, I just bought something that used up all of a 25$ coupon, but then returned it because it turns out I got the wrong item. Does the coupon activate again after the item was returned, or did I just accidentally waste a coupon? If so, is there anything I can do to get the coupon back? Thank you
-
Ender 3 S1 Pro 3D Z Babystep adjustment with Octoprint
Hi, I just got my Ender 3 S1 Pro 3D and am using it with Octoprint. Is there a way to adjust the Z Babystep? Tapping on the screen while printing doesn't allow me to get to the menu for babystepping. Thanks, Darrell
-
Need Help Choosing Parts
Howdy, I'm looking into getting a custom PC made with Micro Center and would love to get some feedback on my current build list. I'm looking for something as close to $2000 as possible. For me, my biggest priorities are cooling, performance, and sound in that order. I've attached my listed below! Thank you in advance!
-
Need Help Choosing Bundle
Hello, I'm attempting to build my first pc and stumbled upon these bundles. I think I've decided on an AMD Ryzen 7 7800x3D bundle, but there are three different ones and I'd like some help deciding which one is best for me. Thank you in advance.
-
Help with partial upgrade of old gaming pc for non-gaming use
I gave my old gaming PC to my father when I got a new one and he really loved it since it was so much faster then the usual store bought desktops. however since he was forced to upgrade to windows 11 the computer started having problems since windows 11 is designed for post 8th generation CPU chip-sets. in order to get a…
-
How long will the $300 Micro Center gift card be bundled with the new Samsung S32GD80 31.5" 4k UHD?
-
When will the Sim Lab GT1 Evo 2 Rig be back in stock at the Indianapolis location?
I have been building a list of components for a sim rig and have been eyeing the Sim Lab GT1 Evo rig on the website. At the time of adding it to my list, it was in stock but I didn't have the funds to purchase at the time. Now that I have, I see that it is out of stock. I was wondering if there is any update/ETA on if/when…
-
Gambox - Micro Center Build
Gambox - Micro Center BuildGaming Rig Read the full story here
-
Need help. Have a pc has power but no boot.
Hi, I am looking for help, my friend built a pc for me but no boot, has power, what can I do?
-
10% off not applied to 7800x3d bundle in-store.
I purchased a 7800x3d bundle along with some other items at the Sharonville location on 5/10/24. I noticed while in-store that I was only receiving 5% off, so I asked to speak to somebody who could do an adjustment to the advertised 10% off. The manager on duty told me that he could not adjust the price in-store but that…
-
Need advice and help with choosing pc parts for first gaming pc.
It’s gonna be my first gaming pc and I wanted to know if this will allow me to play games without problems especially with modding games while having multiple tabs open while playing, as well as if I should change any parts and what monitor should I get along with it. $1,000~2,000.…
-
I need to cancel my Custom Build order.
How do I cancel my Custom Build order. My order # is 18199609.
-
i9-3900K Max Temp
I purchased a PowerSpec B940 from MicroCenter and have not made any changes in BIOS etc. I noticed that the max temp reached on several cores during the rendering of video is 100C. (Equal to Tj Max) Is this temperature OK if a rendering takes an hour or more? Is there a way to lower it a bit if I would like to have the CPU…
-
Any advice for this New Build? I have the MB, CPU and GPU...trying to fill in the gaps
CPU: AMD Ryzen 7 7800x3d CPU Cooler: Thermalright Phantom Spirt 120 SE ARGB Motherboard: AsRock B650E Taichi Lite Memory: TeamGroup T-Force Delta RGB 32 GB (2x16 GB) DDR5-6000 CL30 Storage: TeamGroup Cardea A440 1TB (Found from MB QVL) GPU: Gigabyte Gaming OC GeForce RTX 4070 Ti Super Case: TBD, looking at Lian Li LANCOOL…
-
Question about Changing Components on a Custom PC Build
I had a custom PC built at my local Microcenter last week. It was the Tier 3 build with the 3 year Complete System and Accidental Damage Protection Plan. After doing extra research, I found out that the AIO cooler I picked out has a manufacturing flaw that often causes the pump to fail prematurely. I would like to know…
-
Need Help Choosing Parts
I'm looking to build a decent computer for Star Citizen with around 2k to spend, I'm kinda lost on parts as it's my first computer. If I could get help on this, I would greatly appreciate it.
-
PC Won't Turn On After Wi-Fi Card Replacement
Hello all, I recently upgraded the Wi-Fi card on my ASRock B560M-ITX/AC motherboard to one with Wi-Fi 6E. Unfortunately, after disassembling and reassembling my PC it no longer turns on. The PSU works (I used the paperclip trick talked about online, and the fans spin up). I've tried reseating all the plugs, jumping it with…
-
My Gaming PC Build crashes when playing games on Steam
I have an Asus ROG Strix B450F with an upgrade on the CPU to a Ryzen 5600 12 Core Zen 3 CPU. 64 GB of Corsair RGB Vengeance Pro 3600 MHz. Asus RTX 2060 6 GB DDR5 GPU with Ray Tracing. M.2 WD 2TB NvME SSD system drive. Backup Crucial 2 TB SSD. 735 Watt RGB Raidmax PSU. Creative XBX Soundblaster PCI E card. I have another…
-
Need Help Choosing Parts
Interested if a (1) AMD Ryzen 5 5600GT Cezanne 3.6GHz 6-Core AM4 CPU, and (2) ASUS B550M-A Prime mother board, will support Windows 11 OS.
-
Copy of Receipt
This discussion was created from comments split from: Copy of receipt.
-
Lost fan settings after update bios Powerspec G474
I updated the bios of my Powerspec G474 to MSI version E7D25IMS.AG0 because the computer was turning off randomly. Seems okay now, but the fan is always on (loud) and the computer doesn't want to wake up. I found the setting to wake up the computer with USB, but I am worried about the fan settings. It didn't used to be…
-
Looking for Feedback on Proposed PC Build
With the help of some informed people, I made a PC build using the Micro Center Custom PC Builder and was hoping to get some feedback as I don't know much about building PCs. Here is the build: Sorry for posting images instead of a link. My account isn't old enough to post links here. My local Micro Center is in Yonkers,…
-
Motherboard BIOS
Hi - I recently updated my bios to the stock MSI bios in order to try to fix a display issue. I'm wondering if I should revert to the Powerspec bios in order to get the ideal settings for the PC back as put together by micro center, since switching I've been having bluetooth issues. Where could I find the most up to date…
-
10% Off With Insider Card Not Applied to 7800x3d Bundle In Store
So, family member recovering from surgery has been talking about a new pc and I thought I would help out by buying the 7800x3d bundle in preparation for 5000 series and giving away older am4 parts so they can use them. Anyways, hate to be a pest over a few bucks, but the micro center website said I would get a 10% discount…
-
Bambu A1 Printer Recall Question
There is currently a recall on Bambu A1 printers due to a faulty cable on the heating bed. I bought my printer through Microcenter and no longer have the box. Will the recall apply to me if I would like to return the printer, and possibly upgrade to a P1S? Can I return it to Microcenter and still receive the upgrade…
-
Can someone help me cancer my order?
I accidently placed a order (Order no. #18188439) when I didn't mean to. Could someone help me get it cancelled?
