-
Options for dead spot using AT&T wireless router
We have AT&T's wireless modem/router combination with 300 gig AT&T Fiber as shown below. We also have a smaller older home with plaster walls. In a few of the rooms furthest from the router, we have week internet signal which is resulting in issues since one of these corners is where my wife has her office. I'm looking for…
-
New build: Restarts or freezes under load with 2 or more sticks of ram
Good morning! I put together a new WIN 11 PC with a TUF GAMING Z790-PLUS WIFI D4, Core i9 13900k CPU, 2 new G.Skill Ripjaws V 32GB (2 x 16GB) DDR4-3600 RAM sticks, 2 3 moth old G.Skill Ripjaws V 32GB (2 x 16GB) DDR4-3200 sticks and RTX 3060. The issue I'm having: when I first assembled the PC, including all 4 sticks of…
-
Micro Center's new Twotrees CNC 3018 Pro CNC Router Kit
Hell everyone, my name is Don and have been looking for a reasonably priced desktop 3018CNC. Over t he weekend I noticed that Micro Center id now selling one, so I picked it up over the weekend. The unit looks well made and everything assembled as per the instructions. I am impressed with its h eft and materials. This unit…
-
Pc loading straight into bios
Yesterday was going to jump on the pc, screen saver was frozen I restarted the Pc and went it came back on I takes me right into bios. Tried to exit from here and nothing. Any ideas?
-
Why does my PC turn on and off multiple times before eventually booting to bios on startup?
This just started happening about two months ago. Just before this, one of my RAM sticks died and I replaced it with one from a different company. Both RAM sticks that I have are DDR4 and 8gb but one is a gskill trident z and the other is a gskill ripjaw. Does having two different sticks of RAM cause my computer to…
-
Corsair Hydro X Cooling Kit Exchange
I bought the HX303i bundle back in June and the pump just died (XD3 pump reservoir combo). When I bought it I got the 2 year coverage so I know I can bring it in to get it replaced. Would I need to pull out the entire cooling setup, or can I exchange just the pump? Thanks for any help and insight.
-
When will you receive more raspberry pi's?
Any pi....is there a list I can get on? Its been over a year since I have seen one on a shelf. Ive even tried being added to adafruits email notification and they are gone before you can log in.
-
Looking for help is there anyway to connect an e-gpu to a laptop with no thunderbolt port?
I have a hp - pavilion 16.1" gaming laptop - intel core i5 - 8gb memory - it doesn't have a thunderbolt port. It has a nividia 1060. I just wanted to run games better but I can't afford a brand new system.
-
Star Wars Jedi: Survivor code
I just purchased a Ryzen bundle of 7700x, Motherboard, and Ram from Micro Center this Friday (Jan 20). I see now a few days later that the processor is coming with a code for Star Wars Jedi: Survivor (as of Jan 24). I spoke to chat this morning whether they would be able to issue me a code since I am still within the…
-
Z690-p RAM (ddr4 or ddr5)
Does the z690-p motherboard have to use ddr5 RAM or can I use my existing DDR 4
-
Cancel Online Order
how can i cancel my online order, can i get some help please !?
-
Help
Pc keep going to gigabyte screen
-
Several Things: Customer Service and a Listing of All Purchases
1) How does one call MicroCenter Customer Service? 2) How does one email MicroCenter Customer Service? 3) Given that I provide my telephone number for each purchase for which I am asked to verify my home address, email and telephone number, MicroCenter knows everything that I have purchased. Is there a way that a customer…
-
Question about Dell OptiPlex 7020
I am inquiring about this: Dell OptiPlex 7020 SFF Desktop Computer (Refurbished)Intel Core i5 4570 3.2GHz Processor; 32GB DDR3-1600 RAM; 512GB SSD; Intel HD Graphics 4600 It appears to have two expansion slots in the back. Is that correct? I have an old refurbished unit that I purchased in 2017. The Video is going out. I…
-
Ems Discount
Do you still offer a discount for paramedics?
-
Can yall help me figure out how much to sell my NZXT computer for please guys lol feel my pricing of
So a few years ago i won twitch stremer/youtuber NickMercs holiday pc giveaway came with his LOGO witch was sick and the PC is a beast but i need cash and i barley use it its built with 1.Intel i9-9900k 8core 3.7Ghz 2. Nzxt kraken water cooler X62 w/am4 3. G.skill TridentZ RGB 32gbs(4x8gb)288-pin 3600mhz 4. Asus Rog…
-
Motherboard coil whine driving me nuts
just before xmas i purchased 7700x (with free ram), mobo, cooler and 4080 to upgrade my pc and give my kid my 5800x/rtx3080 as his upgrade..... bla bla bla, you get the picture. I have cosair 850 power supply but forgot i needed one to upgrade his (wife had me in a rush), so i ordered one from evga b stock. they took 6…
-
New AMD non-x CPUs
Hi, I saw that AMD recently released the non-x variation of their 7000 series CPUs but so far I am not seeing them for sale in the stores. Do you know when you will start having them in stock and if you are going to offer a motherboard or memory bundle like with the x variants?
-
Creality CR-10 Smart not feeding filament.
I have a new CR-10 Smart that will not feed filament during a job. It will if I push it through but not automatically. Anyone else have this problem and how did you fix it? I feel like I have tried everything.
-
New monitor problems
I purchased a new AOC 27B2H monitor two days ago, followed set-up instructions, checked all connections, but it will not turn on. I rebooted my laptop, still nothing. Any suggestions?
-
Will Micro Center build custom PCs for a small business?
I am a systems administrator for a small business in need of new desktop workstations for our development and database teams. We will need a total of 12 identical systems and would prefer to pick our own parts. Ideally, I would like MC to assemble them so that we can also purchase 3-year protection on each one and not rely…
-
1st time overclocking "ram" p6x58D_E lga 1366 i7-950
getting ram fault led. cleared cmos, removed cmos battery, reset cmos button. no post. on the lga cpu's the memory controller is built into the cpu. there is a three pin jumper for increasing voltage on the ram. it was always on the default position pins 1 and 2( below 2.0 volts) never moved it to pins 2 and 3( above 2.0…
-
How to load Windows 11 on a new build?
New Build while loading windows 11 I'm stuck at the connect to internet page. What needs an update? I have no way of updating with windows as it hasn't fully loaded. ASUS Prime Z790 A WiFi how do I load drivers without Windows 11 ?
-
Micro Center AMD Ryzen 5 3600 and Gigabyte B450M DS3H WIFI bundle - not working
Hello, I have purchased the Micro Center bundle of a free motherboard with an AMD processor. I purchased the AMD Ryzen 5 3600 CPU with the Gigabyte B450M DS2H Wifi (Rev 1.2) motherboard. Unfortunately, neither seems to be working. I have gone through these debug steps so far: Assembled the CPU and motherboard with no other…
-
I want to know if I can return a new Creality Ender -7 printer
I am receiving the error thermal runaway. I have contacted the vendor and the alternatives are not acceptable with this new printer.
-
No Uncharted code with AMD cpu purchase
Hello, anybody got a amd reward code for uncharted games. how do i get one? thanks chris
-
How to get the Uncharted game bundle code for Ryzen 5600 purchase
Hello. Purchased a Ryzen 5600 on 12/29/2022 which is part of the Uncharted Game Bundle promoted on the Microcenter site at www.microcenter.com/site/content/amd-ryzen-5000-uncharted.aspx. At the AMD rewards site it says I am supposed to receive a game redemption coupon. The AMD page for the Uncharted bundle says it expires…
-
Do coupons stack?
I am planning to go in and buy a cpu + mobo combo. I have two coupons: $25 off an amd cpu and a $25 coupon for doing the "submit a build". Do either or both of these coupons stack with the cpu + mobo combo deal (-$50)?
-
Boot device doesn’t show after installing new CPU
Hello I recently upgraded from a ryzen 5 3600 to a ryzen 7 5800x my motherboard supports 5000 series but I forgot to update bios before install. I installed the chip and when I booted up the system it brought me to a screen that had me press y or n it was about ftpm I’m not very knowledgeable about that. I press y thinking…
-
Your recent survey on REFURB GPU sales.
Over the years I have come to trust Microcenter to carry good products and parts with decent warranties. If you jump on the bandwagon of helping GPU makers dump all the thrashed, worn out, mined to tatters gpu's that were recently dumped on them by unscrupulous miners. You are just going to create headaches for yourselves…
102 discussions
235 comments
Most recent: I need a copy of my receipt emailed to me by PaulL
December 20
