-
First ITX Build
Hello everyone! This is my first post here and was just looking for some advice on what case to build in for my first ITX build! I want to go as small as possible without causing too much headache. I haven’t sourced any parts internally yet, and will do that once I have chosen a case to build in! Any help/advice is…
-
Is a PC Build Under 1,000 Possible
Mfee to play games and run VR. I want a new system and my options are to buy a laptop or rig fully assembled,or build my own. I love to build my own, and this is no exception. Doesn't need the latest graphics but prefer extra processing power to run newer games.
-
Can you use both an Nvidia GPU and Intel GPU in the same system to split loads?
Specifically with Intel ARC's AV1 encoder, I was wondering if it's possible to slot in an A770 below a RTX 3070 and dedicate the A770 to OBS?
-
Issue w SSD enclosure/compatibility
I have a Lenovo X1 Carbon 10th gen using Win 10. I have an external SSD (Samsung SSD 980) that I used with the previous Lenovo laptop (9th gen). With the current computer, the SSD enclosure shows that it has power but the computer does not recognize the connection/drive. I called Lenovo and they told me that it's likely…
-
Is this is good build? Thoughts?...Is this where I show off my build for the $500 giftcard giveaway?
https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=dedda7df-e1b8-4c6f-a515-b321d128eb3e Ive picked the 13100 because its the best 4 core on the market and its under $200 I've picked parts based on price and aesthetics I did not base it on price to performance at all I based it on looks and mid tier…
-
Gaming and photo editing PC under $2000, be nice to not have to upgrade for a while.
Hello. I'm trying to put together a machine (though most likely I'll have Microcenter assemble it). Main goals are gaming and some light photo editing. I'd like to keep the machine under $2000. Secondary goals are to not have to upgrade it for 5 years, and keeping it quiet but I think that's impossible these days. If…
-
Lenovo AIO 520 Ram upgrade
I have Lenovo AIO 520-22ICB I want to upgrade the ram.. To 8gb per slot any idea which type to get or what type is best.. thanks
-
What do I need to do to upgrade my pc to run Hogwarts Legacy?
My current PC has an ASUSTek Computer Inc. Prime A320M-K Rev. X.0x motherboard, an AMD Ryzen 3 2200G with Radeon Vega Graphics 3500 Mhz, an Nvidia Geforce GT 1030 graphics card, and 16 GB of DDR4 RAM. The Asus manufacturer website says that my motherboard supports a PCie 3.0/2.0 slot only. My budget for upgrading would be…
-
Need help with error code on cross hair 8 extreme Q code 02 and I need help with ram compatibility a
I'm currently running in battle damage mode on my cross air 8 extreme with A5960X and a 6700 neck VGA from AMD arm sorry AMS or MSII mean I need help with ram compatibility if need be I will send a list I need to talk to somebody in the store but there is no phone number to you guys
-
First pc need help
Hello there, I’m so lost and confused i don’t know if the parts I choose for this PC are right, but I’m gonna put them on here in hopes that someone out there will help me. Here are the parts I picked, again I definitely didn't chose something right or messed up something.CPU: Intel -Core i7-13700K Motherboard: ASUS -…
-
What are the best parts for my first hardline water cooled system?
So I plan on going to microcenter in a month and I am wanting to make my current system custom water cooled. My system consists of a Ryzen 7 5800x, an EVGA FTW3 3080ti, and it’s in a Hyte y60. So what is everything you recommend that I grab
-
Help Choosing Parts
This discussion was created from comments split from: How to Choose Parts for Your Custom Computer Build.
-
Looking for thoughts on pc build
Monitor: Lg Ultragear 38" Curved LED Budget is Max $2,000.00 Also want to be sure I am maximizing wifi speed. CPU: (1) Intel Core i7-12700K Alder Lake 3.6GHz Twelve-Core LGA 1700 Boxed Processor - Heatsink Not Included ($297.98 EACH) Motherboard: (1) ASUS Z690-F ROG Strix Gaming WiFi DDR5 Intel LGA 1700 ATX Motherboard…
-
First PC - Pink and White Gaming, Streaming, and ART Build
I’m looking to build my own PC for Gaming, Art and Streaming. I would use programs like Adobe Illustrator, Adobe Photoshop, Maya, Unreal, Unity and probably a video editor of some sort. I would like the PC to be capable of Streaming and Gaming at the same time with minimal loss of performance. I would be playing games like…
-
what processor would be best to upgrade to?
i have a 1650 and a really old i5 processor. i want to upgrade my processor for now and need help. any suggestions that would be best?
-
Help with PC Build - Replacing dying tower
Hi all, I was looking to put together a replacement tower for my current PC that is about 5 years old. It has recently started randomly restarting and I am not sure if it's a part-failure and don't really want to diagnose what it may be. Currently I have a 1070 ti video card, a 7700k intel processor, a 500 gb 2.5" sata…
-
Cooling solution
Is there a cooling solution that can be shipped to me for this tight SLI graphic cards? Hardly any room in there. After I installed the 2nd card the computer will power down a couple minutes into gaming activity. Thanks
-
New to pc building, need help with parts
I did some research but not sure if I picked the right parts for the pc. I know I want a 4070 ti gpu and I currently have a 3840 x 2160 monitor at 144HZ. Below is what I came up with for a build. Your comments and suggestions are appreciated! No current budget. Wish to play games like Modern Warfare 2, Warzone 2.0, and…
-
Upgrade or rebuild?
I've had my current system for about 5.5yrs and am trying to decide between building ($1800-2000) or investing ~$500-700 into my current build. Any input on where I'm going to get my best value? Operating System Windows 10 Pro 64-bit CPU Intel Core i5 6600K @ 3.50GHz 37 °C Skylake 14nm Technology RAM 16.0GB Single-Channel…
-
Newbie looking for your suggestions on a Prebuilt VR PC.
Good day all, I am currently using the Oculus Quest 2 stand alone for VR gaming. However, I'm looking to take the leap to the world of PCVR it seems the graphics are insanely better. I do not have the knowledge to build my own PC to completely honest, with that being said I have looked at the Micro Center website and there…
-
Hey im planing on Building a $2500 Gaming pc and I need your help!
Im planning on building my brother his first real gaming pc. I'm mainly looking to build a pc that can handle Warhammer, Skyrim, Cyberpunk, and Sims 6 heavily modded. My budget is $2000-2,500. He wants it to have custom water cooling and be in the Fractal Torrent Case. I've already got a part list but i don't know if i…
-
Need help for first PC, I am lost
Remaking this because I think the first one got deleted after I made an edit. So It's that time for me, I want to build my first PC. I have no clue about the parts minus I think I have decided on the 4070ti for the cost-to-performance ratio in this market. Here is what I want the PC to do. Video editing 4k video for my…
-
Question about the physical store and delivery.
Hello, my name is Eric and I am disabled because of current mental health issues. I am looking to purchase an expensive new computer in the future, and I was hoping to get it from Microcenter. I have a few hurdles to get over in order to purchase it though I have to make a selection and get an invoice from the store The…
-
gonna be my 1st build!
I've listed all what I need but still on searching/digging if they are compatible to each other. any inputs will be appreciated.
-
Hello I’m new to pc gaming
I’m looking for help to build a gaming pc for $750.00-$800.00 dollars that I can run day z and call of duty and games like that any information would be greatly appreciated
-
Need help with this new pc
Im thinking of getting a new pc whose parts are sitting in the custom pc builder as im typing this but I need some second opinions. Im trying to get something that i will be able to plug my existing 3.5 HDD into and my 1660 NVIDEA card into. The PC i currently have is a Dell G5 5000 Intel I3, so its a proper piece of…
-
Need input - Search ArcGIS Pro 3.0 System Requirements For Build Basis
www.microcenter.com/site/content/custom-pc-builder.aspx?load=b593f149-a7db-4afb-9be2-070f2e81cf5e
-
Going for a 4090/i9 13900K build -- does anything about this look off/not compatible?
Sorry for not posting an HTML part list AND not putting link in comment. I'm new and it's not working! Please see below for parts! -- TLDR: Please check to see if these parts are compatible and would work well in a really good performance for an RTX 4090 / i9 13th Gen build! (See build parts!) This is my first time having…
-
Need Help Choosing Parts 800-900 build
Hi! First time builder, been looking through 4-5 pc part lists, and have compiled my own based on those, and I need advice on the GPU and cooling and just the overall design of it. Planning on using it for engineering hw like CAD/Chrome for college, and games like OW2, PUBG, Doom Eternal, and maybe hitman. In MI, USA. I…
-
Help with intro Machine Learning build
Hi, any recommendations or obvious issues with this setup? Also, any recommendations for liquid cooling cpu and gpu? Thanks CPU: (1) Intel Core i9-13900K Raptor Lake 3.0GHz Twenty Four-Core LGA 1700 Boxed Processor - Heatsink Not Included ($579.99 EACH) Motherboard: (1) ASUS Z790-A Prime WiFi Intel LGA 1700 ATX Motherboard…
