-
Upgrading My Current Build
Hey Everyone, Current build below. My budget for upgrading is <$1,000. I'd like a better capacity to stream, multi-task, and prevent FPS dips while playing Valorant, PUBG, Halo, and Tarkov. Right now I have my FPS capped at 144. Looks like my CPU is bottlenecking things and periodic dips occur when lots of action happens…
-
Old cards, new rig?
Hello everyone! Bought two pre-owned GPUs but don't know if they are still useable. If I bring them into the store, can they be tested before I purchase the rest of the parts (or a completely new rig) in store?
-
Order status still says "routed"
I ordered some filament on Thursday from the Houston location (before noon ish). Every time I order filament it always comes the next day, but this time the status just says "routed" and it still hasn't arrived. I think the product page may have said 2 in stock so maybe there wasn't actually any stock.
-
Desktop Build for general use, photo editing and converting old VHS to DVD
Hello! I need to replace my old desktop. I am a new/beginner builder....never done this before. I would like to build a desktop that will last me for years to come. Please help with a build for general everyday use, windows word, spreadsheets, etc, video streaming, photo editing, and wanting to take all my dance recital…
-
PC Reboots While Gaming
I have just recently bought a new powerspec pc a little over a month ago and my Pc reboots while gaming! I only have about 3-4 apps downloaded on the pc itself! I have been monitoring the gpu and cpu temperatures while gaming and they seem to be at a normal temperature! Looking for help on trying to resolve the issue! It's…
-
First PC
Hello Everyone, I am trying to choose what parts I want in my dream PC. I am currently going to use it for DJing/Audio Production, Gaming, and School. I have a link here to help you see what I have been thinking. I would like to stay around the same budget of 1600$. Games I play are FIFA 23, Apex, Overwatch etc...…
-
Service for my ThinkPad P72, still on extended warranty (problems with Lenovo)
Hello, My laptop is about 4 years old, and has had constant problems. The mainboard has been replaced several times, always with another that had different problems. (Once they even downgraded me from a Xeon to a Core i7 and lesser graphics). I have about 2 months left on my extended warranty. They just replaced the…
-
Leaving feedback for your Columbus, OH store
Leaving feedback from an amazing set of experiences, with your Columbus store off Bethel rd sharing how now Micro Center is my electronics center of choice (1.5 hr drive? Worth it) Visit One: I had moved to town recently, and first entered for help setting up my 3D printing center again. I met with Tyler and he gave me a…
-
microcenter.com
microcenter.comPlease enable JS and disable any ad blocker Read the full story here
-
7950x3d bundle question
Is MicroCenter still offering codes for Jedi Survivor and if so, will a code be given when purchasing the 7950x3d combo bundle?
-
Submit a build coupon not received
Hi, I had submitted a build and it is showing approved. I haven't received the coupon though. Could you please resend the coupon? Thanks! https://www.microcenter.com/buildpost/35957/datacruncher?preview=yes
-
Conformation Email
So I ordered a bunch of stuff right, and still haven't had a conformation email, I ordered it around 3 yesterday and still haven't gotten it today, it is a bit early and can wait but im looking to make sure everything is going right, Im not really sure what to do besides ask here. I ordered from the Brentwood Microcenter
-
Need to start a return but chat is offline...
I'm hoping someone from MC can help me out here. I ordered a set of fans online that I need to return but the chat for Shipping and Account Questions has been offline since yesterday. Is there another way I can get this process started? I want to make this return so I can order the other fans I want instead. Thanks.
-
Submit a build still showing pending after 48 hours
Hi, I had submitted my build at submit a build showcase for review. The link is https://www.microcenter.com/buildpost/35957/datacruncher?preview=yes. 48 hours passed but it is still showing pending. Thanks
-
Microcenter PC build services for an engineering rig?
How fancy does Microcenter get with their PC build services? Building an engineering prototype: EPYC 9374F (32-core) CPU Supermicro H13SSL-NT motherboard AMD Instinct MI100 GPU PCIe gen 4 card (2x) Xilinx VCU118 FPGA development card PCIe gen 3 card(s) XMC daughtercard (from top edge of FPGA card) (etc) Bit more exotic…
-
Is my 4CH Relay Friend?
I was going to use the Inland 4CH relay (5v) to switch around 4 USB LED Strips in sequence with a motion sensor trigger. The motion sensor wasn't working the way I wanted, so I switched to a simple button just to get it to work. The Nano I was using went black and the relay board shut off. I guess I fried the NANO somehow.…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. I’m working on a build that I want to keep around $1,200. I play games like wow, league of legends and will be playing Diablo 4. I want to make sure the parts I have picked will do just that. I also will be running a dual monitor set up and was wondering if…
-
Any advice for a gaming pc (beginner)
Looking to build a pc only for gaming. Mainly to play shooting games like r6, cod, gta, gta5 rp etc good graphics! budget is $1,000-$1,500
-
7800 X3D 4090 Build Thoughts
Looking to have a custom PC built around a 7800 X3D and 4090. Curious to get people's thoughts, mainly around the motherboard (wifi needed at a minimum) / CPU Cooler and any other recommendations / changes / additions here. Looking at paying under $3500 ideally. CPU: AMD - Ryzen 7 7800X3D Raphael AM5 4.2GHz 8-Core Boxed…
-
G443 Lighting
I've done what I can, which isn't very much. There seems to be no way to program the LED fans on G443 build, except from the preset buttons on the case. Everyone keeps referring me MSI Center, which only effects the motherboard, which is now on a different cycle than the fans. Wonderful. I had assumed since it was an Lian…
-
Asus Z390P Motherboard lights up but no power
I took my motherboard to a shop yesterday he used his power supply (Didn't Bring Mine) it powered up he was in the bios it worked fine when i returned home I did everything the guy did at the repair shop (Motherboard light up but that's it) i couldn''t get any results CPU fan was spinning (Now it's not even doing that) but…
-
Build of the Week 5/19 - 5/25
Every week, we choose some of our favorite builds submitted to our Build Showcase, with one very talented builder getting highlighted as our Community Build of the Week and also getting an exclusive Micro Center T-Shirt! This week's Community build is: Project: Frames AND Graphics Created by Camco Looking for past Build Of…
-
I can't install ESET Internet Security on my PowerSpec PC
I purchased a PowerSpec PC in April, 2020 and a prompt came up saying to install ESET Internet Security. When I try to fill in the registration form I have to choose my country then state THEN fill in the other blanks. After all that, I get "The License Key or Retail Code you entered could not be found in our system." What…
-
The NVIDIA GeForce RTX 4060 Ti is Out Now: 40 Series 1080p Gaming!
Written by Sean Mekinda NVIDIA's newest card has arrived! The GeForce RTX 4060 Ti (8GB) is out now and takes everything you loved about last generation's GeForce RTX 3060 Ti and pushes the dial to 11 with a suite of new features, all while reducing the power draw by over 25%. The GeForce RTX 4060 Ti comes loaded with all…
-
Diablo 4 Code with in-store 4080 Purchase
I bought a Gigabyte RTX 4080 OC on Monday from the Westmont store and did not receive a code to redeem for Diablo IV. What do I need to do to get the code?
-
Ender-6 isn't homed correctly
I have a Creality Ender-6. I can't get it set up correctly. When I am in the Aux Leveling screen it doesn't seem to know where the nozzle actually is. When I press "3" or "4" it positions the nozzle far to the left of where it should be. I expect the nozzle to be right of center on the Printing Platform but it isn't. If I…
-
Can I ship back a store bought item?
Hi, I bought an item from the Flushing location, and would like a return/refund (incompatible), but 100% cannot return to that location. Is there any way I can ship the product back at my own expense to the store for a refund, or another store in any other location/state even, as it’s impossible for me to go in person.
-
Choices are Overwhelming. Please Help
I want to build a PC for 4K video editing. I started to build one online but the choices are overwhelming. I would have the store build for me. What can you suggest a kit when using the following major parts Intel i7 (16 core) Nvideo Gforce 4700xt 32GB RAM 1TB SSD (boot) 2TB Hard drive I would not know how to choose the…
-
Power cord for external monitor question
Hello, I need a new power cord for my external monitor and am having a very hard time finding the correct one. Please help! :) It is a Dell P4317Q monitor. Thank you!!!
-
Build of the Week 12/2 - 12/8
Every week, we choose some of our favorite builds submitted to our Build Showcase, with one very talented builder getting highlighted as our Community Build of the Week and also getting an exclusive Micro Center T-Shirt! This week's Community build is: The Warframe Created by ppennza Want your chance to be showcased? Just…
