-
Now at Micro Center: The NVIDIA GeForce RTX 4090!
Written by Sean Mekinda The next generation of NVIDIA graphics cards has arrived at Micro Center, and leading the charge is the GeForce RTX 4090! Not only does the RTX 4090 pack a massive amount of power, it also heralds the arrival of a suite of new NVIDIA features, including improved ray tracing performance and the…
-
Build of the Week 4/14 - 4/20
Every week, we choose some of our favorite builds submitted to our Build Showcase, with one very talented builder getting highlighted as our Community Build of the Week and also getting an exclusive Micro Center T-Shirt! This week's Community build is: Main PC Created by Leslie Z. Looking for past Build Of The Weeks? We've…
-
Need your opinion on this please
Hello everyone. I am building a video editing and possibly machine learning pc with Ryzen 9 7950X3D Raphael AM5 4.2GHz 16-Core Boxed Processor. I want to keep the cost under 1600 dollars. But my main focus is on the CPU, and the Ram. As far as GPU, I think I can get away with a 3060 rtx which is about $320. Does anyone has…
-
Doesn't offered promotion work?
Hello I am checking the microcenter website. In the menu I go to Clearance (1). Then I go to open boxes (2). In the open boxes items I see that MicroCenter website offers me Diablo IV with a purchase of an open box RTX 4080 with the price of $1197.96. I also see that the price for the open box ASUS Z790-Plus motherboard is…
-
Arizona
Please forward my request to the real estate team. We really need a micro center in Arizona. There is a perfect location on the corner of the I-10 interstate and Baseline Rd. In Tempe, Arizona (boarding of Phoenix and Tempe). This was formerly a Fry’s electronics and has been vacant for quite a while. There is only one…
-
Change the Pickup Policy
I'd buy everything from MicroCenter, but the requirement that the person picking up the online purchase also provide payment and/or the card used to place the online order has caused our business to blacklist MicroCenter as a vendor. Our accounting department and purchasing card is out of state, so the only way to purchase…
-
Linux sub-subforum in this subforum?
So, I see there's a Apple and a Windows section here, but no Linux? Where is the love at? 😫💔
-
Recommendations for a solid UPS?
Hello all, Had a ton of power issues in my area recently, so I’m looking into getting a 1500VA UPS for my gaming PC (850W psu, i7-12700k and 3080 ti), a couple monitors, and my router, just enough to stay up for a good 10 min or so to let me shut everything down properly in event of an outage. True sine wave output would…
-
Why is my build not powering on?
Please move this post if its on the wrong section. At the beginning of this month, I bought an Asrock Phantom Gaming 4 mobo, a Montech X1 desktop casing, and a G.Skill MB750G PSU from my local Micro Center to begin my first computer build. Almost a week ago, I got a Powercolor AMD Radeon RX6500 XT GPU and a Gigabyte Wifi…
-
Motherboard in bundle defective
Hi, I bought a CPU-MB-RAM bundle (7700x+MSI PRO B650-p wifi+G.Skill ddr5 16GBx2) from micro center last Thursday, and during my system-building process, I found that my motherboard is defective. After booting the system with the original BIOS (which is V13), it says "Over Current Have Been Detected On Your USB Device!!".…
-
Will MacBook Air M2 16/512 be back in stock at GA-Marietta?
So the MBA M2 16/512 still shows up on the GA-Duluth store site, but not on the GA-Marietta store site. On the GA-Marietta site, it doesn't even show up as an out of stock item when browsing through the MacBook Airs. It's just not on the list. I'm wondering whether this means the Marietta store has stopped carrying it, or…
-
How to get a receipt after purchase for Manufacturer Warranty Replacement [Netgear]
I bought a Nighthawk CM1200 Cable Modem a few months ago out of the Cambridge, MA store and no longer have the receipt. There is a factory defect and in order for Netgear to replace my modem, I'd need my receipt or proof of purchase. Is there ANY way to reclaim my receipt if I purchased in-store and without a credit…
-
Never received receipt
On Monday I went to a Micro Center and bought an Ender-3 S1 3D printer and some Inland Filament. It was the first time I shopped at Micro Center so I gave the cashier my phone and email and she said I would receive the receipt through my email. When I got home I realized I never received the recipt, so I logged into the…
-
Does opening up my laptop void my warranty?
I opened up my ASUS laptop to insert a single stick of RAM in, and in the process I believe I accidentally damaged my headphone jack as it no longer streams audio. Aside from inserting the RAM, I did not otherwise modify the laptop. I know this more than likely voided my manufacturer's warranty, but I also purchased…
-
Lost Receipt
Not sure if this belongs here, but I lost the ticket for a graphics card bought 6 months ago. It is now failing sometimes. How can I get a copy of the receipt?
-
Laptop upgrade?
I have a laptop that is 7 years old and still runs well but freezes occasionally and always says waiting for the cache. The hard drive needs to be replaced because of a bad sector and I was wondering if I could replace the CPU as well. It is an Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz 2.60 GHz. I can't afford a new laptop…
-
Pc keeps turning off and on when I plug in the CPU power connector
My PC Specs: (pre-build with some changes) CPU: Intel i7-11700F Motherboard: AsRock B560m-c RAM: DDRR 4 G.skill TridentZ rgb 32GB GPU: NVIDIA GeForce GTX 1660 Super Case: iBUYPOWER Storage: 480GB SSD, 1TB HDD, & 2TB HDD PSU: 500 Watt This hopefully will make sense! I am really bad at writing! I have had this pc for almost…
-
microcenter.com
microcenter.comPlease enable JS and disable any ad blocker Read the full story here
-
Does the St. Louis Park store take electronics for recycling?
Also, do you offer harddrive shredding?
-
Windows
Hi I have a question. Im going to build a pc at micro center and I want to know do you guys download windows for us or do i have to get the flash drive and download it myself. Thank You!
-
Microcenter replacement policy in MD
Recently purchased a pair of headphones at Rockville microcenter, found them defective out of the the box, and almost got rejected a replacement pair by the employees because of microcenter policy. For anyone else who finds this to happen, be informed of your rights! "Under Maryland law...If an item is defective, the store…
-
Upgrading PowerSpec G470 to 3090 RTX
I bought a PowerSpec G470 last year and so far it's working great. However, the applications I'm using require more VRAM than my current 3080Ti can provide. Are the expansion slots in the G470 big enough to house a 3090 RTX, and will the current power supply support the upgrade card?
-
Cable Management
I wonder why PowerSpec didn't feed the GPU power cables straight down through the case PSU shroud slot? It would have had much cleaner cable management. It technically wouldn't have blocked the fan's airflow. One of these days I might re-route it. I mean it doesn't look too bad now, but...
-
Give an attaboy
We are at the Sharonville, Ohio store yesterday looking for a new router. We were helped by a young man by the name of Chris S. Chris was very polite and helped us find the right router for our needs. Great person to deal with and knows his stuff. We will be retuning for our computers needs.
-
4090 and redfall
How do i get a code since I never got one on my receipt anything
-
Get Whole House Internet Without Whole House Wiring
Written by @Vaganza About 5 years ago, my brother designed a new house for my parents and when we got it built, we took the opportunity to run Cat6 cable to 18 locations in the house. I pulled all that cable and set up faceplates all throughout the house. We even built out a wall rack with modular patch panels, a network…
-
Micro Center Service Center Highlights: The Custom Rebuild
Written by @Vaganza Micro Center’s Service department offers everything your computer could need, from simple OS reinstalls, to data backups, to software and hardware installations, even as far a fully custom water-cooled systems using hard tube installations. For many of us in the service department, we all have our…
-
Hands On with the Twotrees TTC 450 CNC Router
Written by Nick Biederman We’ve taken a fairly in-depth look into the world of hobbyist laser cutters over the last year. Today we’ll be shifting gears and looking at a desktop-sized CNC router from Twotrees, the TTC 450. CNC routers are conceptually similar to laser cutters but with a major difference in how they cut.…
-
The Max 1440p Gaming Build Guide
Written by @Lambdaben Today’s build is all about getting the maximum performance build for 1440p gaming and we’re going all out. By building with some of the best products on the market, you'll end up with an absolutely killer build with some nice aesthetics to match. So, let’s dive right in. Processor: AMD Ryzen 7800X3D…
-
Turning on HDR in Resident Evil 3 turns my screen red. Any thoughts on how to fix this?
I'm wondering if anyone here can help. I'm trying to play RE3 with HDR on, but whenever I enable HDR, my screen turns very red. It appears to be an issue with my monitor as it doesn't affect screenshots (see attached images). Here are my specs: Graphics card: AMD RX 7950 XT (Reference) CPU: Ryzen 7 5800X3D Monitor: MSI…
