-
Conformation Email
So I ordered a bunch of stuff right, and still haven't had a conformation email, I ordered it around 3 yesterday and still haven't gotten it today, it is a bit early and can wait but im looking to make sure everything is going right, Im not really sure what to do besides ask here. I ordered from the Brentwood Microcenter
-
Need to start a return but chat is offline...
I'm hoping someone from MC can help me out here. I ordered a set of fans online that I need to return but the chat for Shipping and Account Questions has been offline since yesterday. Is there another way I can get this process started? I want to make this return so I can order the other fans I want instead. Thanks.
-
Submit a build still showing pending after 48 hours
Hi, I had submitted my build at submit a build showcase for review. The link is https://www.microcenter.com/buildpost/35957/datacruncher?preview=yes. 48 hours passed but it is still showing pending. Thanks
-
Microcenter PC build services for an engineering rig?
How fancy does Microcenter get with their PC build services? Building an engineering prototype: EPYC 9374F (32-core) CPU Supermicro H13SSL-NT motherboard AMD Instinct MI100 GPU PCIe gen 4 card (2x) Xilinx VCU118 FPGA development card PCIe gen 3 card(s) XMC daughtercard (from top edge of FPGA card) (etc) Bit more exotic…
-
Is my 4CH Relay Friend?
I was going to use the Inland 4CH relay (5v) to switch around 4 USB LED Strips in sequence with a motion sensor trigger. The motion sensor wasn't working the way I wanted, so I switched to a simple button just to get it to work. The Nano I was using went black and the relay board shut off. I guess I fried the NANO somehow.…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. I’m working on a build that I want to keep around $1,200. I play games like wow, league of legends and will be playing Diablo 4. I want to make sure the parts I have picked will do just that. I also will be running a dual monitor set up and was wondering if…
-
Any advice for a gaming pc (beginner)
Looking to build a pc only for gaming. Mainly to play shooting games like r6, cod, gta, gta5 rp etc good graphics! budget is $1,000-$1,500
-
7800 X3D 4090 Build Thoughts
Looking to have a custom PC built around a 7800 X3D and 4090. Curious to get people's thoughts, mainly around the motherboard (wifi needed at a minimum) / CPU Cooler and any other recommendations / changes / additions here. Looking at paying under $3500 ideally. CPU: AMD - Ryzen 7 7800X3D Raphael AM5 4.2GHz 8-Core Boxed…
-
G443 Lighting
I've done what I can, which isn't very much. There seems to be no way to program the LED fans on G443 build, except from the preset buttons on the case. Everyone keeps referring me MSI Center, which only effects the motherboard, which is now on a different cycle than the fans. Wonderful. I had assumed since it was an Lian…
-
Asus Z390P Motherboard lights up but no power
I took my motherboard to a shop yesterday he used his power supply (Didn't Bring Mine) it powered up he was in the bios it worked fine when i returned home I did everything the guy did at the repair shop (Motherboard light up but that's it) i couldn''t get any results CPU fan was spinning (Now it's not even doing that) but…
-
Build of the Week 5/19 - 5/25
Every week, we choose some of our favorite builds submitted to our Build Showcase, with one very talented builder getting highlighted as our Community Build of the Week and also getting an exclusive Micro Center T-Shirt! This week's Community build is: Project: Frames AND Graphics Created by Camco Looking for past Build Of…
-
I can't install ESET Internet Security on my PowerSpec PC
I purchased a PowerSpec PC in April, 2020 and a prompt came up saying to install ESET Internet Security. When I try to fill in the registration form I have to choose my country then state THEN fill in the other blanks. After all that, I get "The License Key or Retail Code you entered could not be found in our system." What…
-
The NVIDIA GeForce RTX 4060 Ti is Out Now: 40 Series 1080p Gaming!
Written by Sean Mekinda NVIDIA's newest card has arrived! The GeForce RTX 4060 Ti (8GB) is out now and takes everything you loved about last generation's GeForce RTX 3060 Ti and pushes the dial to 11 with a suite of new features, all while reducing the power draw by over 25%. The GeForce RTX 4060 Ti comes loaded with all…
-
Diablo 4 Code with in-store 4080 Purchase
I bought a Gigabyte RTX 4080 OC on Monday from the Westmont store and did not receive a code to redeem for Diablo IV. What do I need to do to get the code?
-
Ender-6 isn't homed correctly
I have a Creality Ender-6. I can't get it set up correctly. When I am in the Aux Leveling screen it doesn't seem to know where the nozzle actually is. When I press "3" or "4" it positions the nozzle far to the left of where it should be. I expect the nozzle to be right of center on the Printing Platform but it isn't. If I…
-
Can I ship back a store bought item?
Hi, I bought an item from the Flushing location, and would like a return/refund (incompatible), but 100% cannot return to that location. Is there any way I can ship the product back at my own expense to the store for a refund, or another store in any other location/state even, as it’s impossible for me to go in person.
-
Choices are Overwhelming. Please Help
I want to build a PC for 4K video editing. I started to build one online but the choices are overwhelming. I would have the store build for me. What can you suggest a kit when using the following major parts Intel i7 (16 core) Nvideo Gforce 4700xt 32GB RAM 1TB SSD (boot) 2TB Hard drive I would not know how to choose the…
-
Power cord for external monitor question
Hello, I need a new power cord for my external monitor and am having a very hard time finding the correct one. Please help! :) It is a Dell P4317Q monitor. Thank you!!!
-
Build of the Week 12/2 - 12/8
Every week, we choose some of our favorite builds submitted to our Build Showcase, with one very talented builder getting highlighted as our Community Build of the Week and also getting an exclusive Micro Center T-Shirt! This week's Community build is: The Warframe Created by ppennza Want your chance to be showcased? Just…
-
Build of the Week 1/27 - 2/2
Every week, we choose some of our favorite builds submitted to our Build Showcase, with one very talented builder getting highlighted as our Community Build of the Week and also getting an exclusive Micro Center T-Shirt! This week's Community build is: Fire and Ice Created by Dale B Chosen by @Rye_Bread Holy cow, this week…
-
Build of the Week 5/5 - 5/11
Every week, we choose some of our favorite builds submitted to our Build Showcase, with one very talented builder getting highlighted as our Community Build of the Week and also getting an exclusive Micro Center T-Shirt! This week's Community build is: Modern Build Created by Dayoung L Chosen by @ricardo_ortega: I’m a big…
-
Build of the Week 4/28 - 5/4
Every week, we choose some of our favorite builds submitted to our Build Showcase, with one very talented builder getting highlighted as our Community Build of the Week and also getting an exclusive Micro Center T-Shirt! This week's Community build is: Gaming for my after college life! Created by Johnny D Looking for past…
-
Prebuild in the Sharonville Store
Here in Sharonville we do like to keep a few systems that we put together from a curated list of parts based on what we are seeing is popular with the BYO crowd. There were a pair of these I put together last weekend, I think I checked and they may have sold already, but I thought it looked good. The radiator in the front…
-
Solving Nozzle Clogs on Bowden Tube Style 3D Printers: A Comprehensive Guide
Written by Kyle Wall Nozzle clogs are a common issue faced by 3D printing enthusiasts, particularly on Bowden Tube-style 3D printers. These clogs can hinder the printing process and result in subpar print quality. This comprehensive guide will delve into the causes of nozzle clogs and provide preventive measures to help…
-
Looking to build the fastest 4k/120 gaming rig I can
I Currently run an i9-10900k and RTX3090 hooked up to a LGC1 OLED (yeah I know real gamers use a monitor, but I like gaming from my couch with a controller) and would like to build a faster rig. Picked what I thought might fit the build off various reviews, but it has been a while since I have kept on top of what the best…
-
Choosing 4070Ti or 4080 for Diablo 4 at 4K?
Hi all, Just saw this deal of getting Diablo 4 for free if buying 40 series. I am thinking of either 4070 TI (currently around $800) or 4080 (currently cheapest at $1190) The other components are pretty standard: I7-13700K, Asus Z790-P PRIME, [G.Skil] PC5-4800 16Gx2 (to qualify for the combo deal), Samsung 980 Pro 2T [M.2…
-
The new NZXT H9
What do you all think about this one?
-
USB C Docking Station toggle between two laptops
I have a Dell USB-C Docking Station that I want to toggle between two laptops ( USB-C ports) . Are there USB C KVM switches or USB C switches that can do toggle my docking station between the two laptops ? Physically plugging and unplugging the docking station between laptops is a pain.
-
What is a Better Air cooler for my Intel 10700 & My Case?
This air cooler was installed by a local shop in May 2022 after i failed with trying to install Be Quiet Pure Rock 2 Myself, anyways wanting to try and get cooling all good before i upgrade to a Geforce 3060 card or 4060 card in the future. I know probably be best if i just get an entire new case with airflow in mind…
-
Exchange a graphics card 35 days of purchase
Hello, I purchased a Gigabyte 3060ti vision last month at Denver store, I really want to upgrade/exchange it to the 6700xt and pay more for it, unfortunately I have passed the 30 days window. It is a holiday weekends so it takes longer time for me. Could any mods help me have a private message to their manager and ask if I…
