-
Pc keeps turning off and on when I plug in the CPU power connector
My PC Specs: (pre-build with some changes) CPU: Intel i7-11700F Motherboard: AsRock B560m-c RAM: DDRR 4 G.skill TridentZ rgb 32GB GPU: NVIDIA GeForce GTX 1660 Super Case: iBUYPOWER Storage: 480GB SSD, 1TB HDD, & 2TB HDD PSU: 500 Watt This hopefully will make sense! I am really bad at writing! I have had this pc for almost…
-
microcenter.com
microcenter.comPlease enable JS and disable any ad blocker Read the full story here
-
Does the St. Louis Park store take electronics for recycling?
Also, do you offer harddrive shredding?
-
Windows
Hi I have a question. Im going to build a pc at micro center and I want to know do you guys download windows for us or do i have to get the flash drive and download it myself. Thank You!
-
Microcenter replacement policy in MD
Recently purchased a pair of headphones at Rockville microcenter, found them defective out of the the box, and almost got rejected a replacement pair by the employees because of microcenter policy. For anyone else who finds this to happen, be informed of your rights! "Under Maryland law...If an item is defective, the store…
-
Upgrading PowerSpec G470 to 3090 RTX
I bought a PowerSpec G470 last year and so far it's working great. However, the applications I'm using require more VRAM than my current 3080Ti can provide. Are the expansion slots in the G470 big enough to house a 3090 RTX, and will the current power supply support the upgrade card?
-
Cable Management
I wonder why PowerSpec didn't feed the GPU power cables straight down through the case PSU shroud slot? It would have had much cleaner cable management. It technically wouldn't have blocked the fan's airflow. One of these days I might re-route it. I mean it doesn't look too bad now, but...
-
Give an attaboy
We are at the Sharonville, Ohio store yesterday looking for a new router. We were helped by a young man by the name of Chris S. Chris was very polite and helped us find the right router for our needs. Great person to deal with and knows his stuff. We will be retuning for our computers needs.
-
4090 and redfall
How do i get a code since I never got one on my receipt anything
-
Get Whole House Internet Without Whole House Wiring
Written by @Vaganza About 5 years ago, my brother designed a new house for my parents and when we got it built, we took the opportunity to run Cat6 cable to 18 locations in the house. I pulled all that cable and set up faceplates all throughout the house. We even built out a wall rack with modular patch panels, a network…
-
Micro Center Service Center Highlights: The Custom Rebuild
Written by @Vaganza Micro Center’s Service department offers everything your computer could need, from simple OS reinstalls, to data backups, to software and hardware installations, even as far a fully custom water-cooled systems using hard tube installations. For many of us in the service department, we all have our…
-
Hands On with the Twotrees TTC 450 CNC Router
Written by Nick Biederman We’ve taken a fairly in-depth look into the world of hobbyist laser cutters over the last year. Today we’ll be shifting gears and looking at a desktop-sized CNC router from Twotrees, the TTC 450. CNC routers are conceptually similar to laser cutters but with a major difference in how they cut.…
-
The Max 1440p Gaming Build Guide
Written by @Lambdaben Today’s build is all about getting the maximum performance build for 1440p gaming and we’re going all out. By building with some of the best products on the market, you'll end up with an absolutely killer build with some nice aesthetics to match. So, let’s dive right in. Processor: AMD Ryzen 7800X3D…
-
Turning on HDR in Resident Evil 3 turns my screen red. Any thoughts on how to fix this?
I'm wondering if anyone here can help. I'm trying to play RE3 with HDR on, but whenever I enable HDR, my screen turns very red. It appears to be an issue with my monitor as it doesn't affect screenshots (see attached images). Here are my specs: Graphics card: AMD RX 7950 XT (Reference) CPU: Ryzen 7 5800X3D Monitor: MSI…
-
What are the marked down red prices on the website for?
I saw a GPU for $325 on your website. Originally $350 but on your site it was marked down in red and said $325. Seems most products are marked down. But when i went in the store to purchase the GPU it was still $350. So what is the mark down price for on the website if it isn't' actually marked down in the store?
-
The Open Air Build Guide
It’s always exciting when you finally decide you want to build your own PC! I know I was really looking forward to actually building my own PC. My old setup was from high school and was using onboard graphics, which… yikes! Then, a few years ago, I saw this wicked case at Micro Center and knew what I had to do. I was…
-
Bought a 4090 and did not receive a $100 steam gift card
I was wondering if I have any options about receiving a $100 steam gift card that was apart of the 40 series card deal. I never received any gift card and was hoping it would come in the email but I have yet to receive anything. Any idea if I could reclaim my promised card.
-
Can I buy my all my pc parts together then take it to micro center to get it built?
I've recently bought some pc parts and I don't wanna break or mess anything up so I wanna take it to the micro center and have them build it for me. I made sure all the parts work with each other, I jus wanted to know if I can take everything and have someone else build it for me
-
Motherboard ($200-400) for i5-13600K PC?
Planning to build a new i5-13600K PC, but I can’t decide which motherboard to choose. I’ve heard there have been problems with certain DDR5 motherboards. 1) Which brands / models of Z690/Z790 motherboards are most reliable? 2) DDR4 or DDR5 for best reliability and performance? Thanks in advance!
-
microcenter.com
microcenter.comPlease enable JS and disable any ad blocker Read the full story here
-
Tax exempt but can't get tax refunded
Hello, I had a workstation repaired in January and, when I looked what I thought was the receipt, there was no tax. That is correct as I work for a tax exempt university and this was a repair done for one of my users' iMac workstations. About a week later, I got an email stating that the charge on the payment card didn't…
-
6 Simple Tricks to Help Your 3D Print Stick to the Bed
What is one of the most frustrating things that can happen when you’re 3D printing? A failed print due to bed adhesion issues. We've got six easy tricks to help your 3D prints to stick to your build plate. 1. Clean the Bed If you’re having bed adhesion issues, the first action you should take is cleaning your build plate…
-
upgrading PC
I'm currently running a Ryzen 7 2700x with a 2070 Super. I'm in the market to upgrade, i want to get into 1440P gaming now. However, i'm troubled on graphics cards. I can not decide if the 4080 is worth the extra $400 over the 4070 TI. I will be paring it with a 13600k processor and DDR5 ram. I am looking for a hand on…
-
Recurring screen flickering issue
I've had this issue with my monitor for a while now where the bottom portion of the screen flickers for several minutes after I first turn on my system. It only does this after I've left my PC off for more than a couple consecutive days, and the flickering is worse and/or lasts longer if my PC has been off for longer…
-
Should I upgrade from the Ryzen 7 3700X to the Ryzen 7 5800X3D?
Apologies if I'm doing this wrong. Don't think I've ever utilized this community stuff. Wasn't sure what category to select. In addition to the Ryzen 7 3700X, I have 32GB of RAM and now an RTX 4080 up from an RTX 3070. I also swapped out my 850W PSU for a 1000W one. Is my Ryzen 7 3700X essentially bottlenecking my 4080?
-
😞😡 DANGEROUS & Irresponsible of Micro Center. 😡😞
I Love building Custome gaming PC's and have been for several years now. Yesterday I went to buy a new bundle for my new project, I am building a space capsule pc case and computer. When I asked for help in finding the bundles, the salespersons completely ignored my request, even though I asked about 5 times for the…
-
!?!?!? Advice On Parts Picked For First-Time Custom Water Cooled System Build *Warning:Post is Long*
😀Hello Community, My name is Rick and I've been saving for a custom water cooled gaming system for a while. I'm finally ready to make some decisions and want to build the system myself. The goal of my build is to have constant 4k gaming for titles that will allow for it at high FPS. I don't currently have the monitor to…
-
Microcenter Credit Card CANNOT BE USED ONLINE!!??!!
Are you kidding me? The only reason I got it is because I am moving from Fairfax Va. to Tampa Fl. and will be unable to shop at Microcenter. Get it together guys.
-
Computer Clean and Speed Up Software
Is there any agreement in what the best Computer Clean and Speed Up Software is for an Intel I7 computer running Windows 10?
-
Gateway Laptop Warranty
I purchased a Gateway laptop GWTN141-10BK from Paterson/NJ store on Nov2022 (075-WP-7508798). It was working ok till March. Now when booting, system stops at the BIOS screen and not going further. Contacted the Gateway technical support and they were not able to fix it after trying many steps. When I asked them about the…
