I can not get Kali Linux to finish the initial install. I get an error at the "partitioning disk" screen of the wizard. It says "The Kernel can not be informed." I have tried everything. Does micro center work with Linux at all?
RTX 3070, 5600x, 570 Tomahawk, Corsair Rm750x, WD SN550 Just built a new computer that boots, all the fans, rgb, etc turn on, but it will not post or, at the very least, I can't see anything happening on screen because my monitor does not detect any signal from the GPU (yes, I have tried multiple cables, as well as hooking…
Is so when will it be available?
Hi, I would like to know if the case that comes with my G436 is large enough to support the 3090? Also, is the psu sufficient for the card?
I just recently bought a Asus Strix Scar 17 laptop and a Samsung 2Tb NVME drive for it as a second drive. I don't need cloning services. I did not want to install it myself because there are 2 flimsy LED cables attached to the cover and I did not want to void the warranty. I looked on the Microcenter website and it stated…
I've got a G436 PowerSpec machine and I've got a question about wiping/restoring via Windows Recovery. I've created the USB image through the Windows Recovery Drive functionality, however I'm wondering what happens with the system's drivers. I'm assuming MicroCenter preloaded some drivers onto the machine and I'm not sure…
I know my local Micro Center is the best Micro Center. It's the one I go to, I know the people who work there, and it's pretty dang big. But, I feel like you all probably think your local Micro Center is better, so convince me: why is YOUR Micro Center the best?
HI! It has been a very long time since I was last down to St. Davids PA and am planning to travel back down to purchase everything based on the answer(s) to this post- some time this week, most likely. My current system is a Gateway FX6803-35. This is a dual channel Core i7, running Windows 7 (64) Ultimate. I would prefer…
Hello I have recently had a few online orders of Inland PLA+ Spooless cancelled. I was wondering if the shortage was temporary or if this item is being discontinued? Currently, there is no Micro Center near me. So, online ordering is my only choice. Thank you
With the recent release of the Raspberry Pi Pico, the number of projects you can do with a Pi just went up. What are you building currently? Or, do you have plans for a new build and just haven't figured out what pieces you want to use yet? And be sure to check out more Raspberry Pi ideas and tips over here!
Tech Support My custom build from Mayfield store is several months old. Lately I noticed the RGB on the iCUE H100i RGB PRO XT Liquid CPU Cooler goes out sometimes for a couple seconds,. The problem is intermittent and haven't noticed it in gaming, When I reboot it works ok for some time then will act up. I think it is just…
Not sure if this is the right subforum, but I was wondering the above. As of months ago B450 boards have gotten BIOS updates which allow them to run 5000 series (Zen3) AMD CPUs. Apparently B450s will have stickers on the boxes indicating they've been updated for 3000 series (per:…
I had bought this headset around a week ago and it's been nothing but issues and the support team won't even answer/contact me for anything I've asked. I have the metal rattling around in my headset, everytime I turn on my PC the wireless transmitter doesn't want to connect to my headset, there is static every 5 min…
Is it possible that the stock on the gaming pc’s has not yet updated on the website and there is still some in stores while people are getting their vouchers?
I have a Dell Inspiron 3471 (Windows 10 [64-bit]) – just a simple computer. It has a regular old RAID hard drive. I bought a Samsung 970 EVO Plus SSD at Micro Center and they agreed I simply install it in the empty slot, use the Samsung software to clone my hard drive, and change the BIOS to boot the SSD. But I get an…
Hi I have an old original xbox, and was wondering what the options were for how to stream it on my pc. I have open Pcie 3.0 slots if it is relevant
I just finished building my first pc (Gigabyte x570 Aorus Elite wifi/Ryzen 5 5600x) I tried doing the bios update (By using q flash) but when I put my usb into the bios slot nothing happend. The flash drive had a red light for a split second and then went away. I then clicked the q flash button and then I didnt see a light…
I just did an in store pickup order, 12495967. Can I have this order cancelled?
I purchased a docking station around August of last year but cannot find the order in my online account and need a copy of the receipt for warranty with the manufacturer. I have the product information part# and SN. Is someone able to reach out and help me with this?
Any chance this might be in shortly? Can buy it elsewhere but would rather buy from MicroCenter. Or even another Asus with 10gb ethernet.
I need help figuring out what are the best router and modem I should purchase for our cabin. I don't want to rent Spectrum's modem or router and I don't want to pay through the roof either. But I don't want one that lives up to a cheap name either. What are the suggestions? I greatly appreciate this. And i'm a novice at…
My new powerspec G508 is not providing sound. I can't get sound through Dell monitor or through CPU. Please help! I've checked drivers and enabled sound. What am I missing? Thank you
The QNAP TS-231K is about 5 years old as of 2021, but it looks like a decent 2 bay NAS for the price. Is there a newer product that I should consider? What have been the big improvements since the QNAP TS-231K was introduced?
Hi, I have a pop out when I boot my machine talking about "there is no vbios support detected in this card". I don't even have a graphic card installed, I use the integrated intel card that came with the machine. I don't want to see this pop out, what could be the problem and how do I fix it? I have the POWERSPEC B745/I7…
Hello, I would like to order several of these if possible. My local store is Yonkers. Can I do this directly?
With the Wyze Watch, you can control your whole Smart Home ecosystem from your wrist. And, in light of it's arrival at Micro Center, we want to hear about your Smart Home! What do you have set up, what do you have automated, and how nice is it to skip light switches?
I'm really sorry about the long post, but i just paid almost 2 grand for this PC so I am trying to be as thorough in my explanation as I possibly can. So last night, eager to get deeper into learning about my PC so i can be more familiar with things when i need to trouble shoot or upgrade in the future, I booted into BIOS…
I bought a new motherboard from Microcenter several weeks ago expecting to get a CPU from a friend. That didn't happen. If I buy a CPU from Microcenter, can I still get a bundling discount or do I have to buy the board and the CPU at the same time?
I was wondering if anyone has any information regarding the stocking of 10th gen intel. I would like to use 10th gen in my build because it is currently a better deal at its discounted prices, I won't be able to pay for it at the moment though and I was wondering how long they will continue to stock these chips. Thanks
I know almost zero about computers. I use adobe suite to design vehicle wraps. BIG files! Can anyone recommend a desktop that is not Apple? My work is pc so I want work to home to be trouble free. I'm overwhelmed by all the options. Budget would be $2000 or less. Thanks for any advice.
Submit photos and a description of your PC to our build showcase
See other custom PC builds and get some ideas for what can be done
Services starting at $149.99
