-
Buying build a pc parts one at a time and then bring them in to install?
I am working on deciding what parts to get for my pc build. Some parts I know what I want for sure. Like the operating system. Microsoft Windows 10 Pro 64-bit - 1pk DSP OEM DVD - Micro Center If I buy some parts early, like Windows 10 Pro, do I just need to bring in the unopened software package and then Microcenter will…
-
First build help.
Wanted some info on if this is a good build and if everything is compatible. This is my first build. I know its going to be a tad difficult with all the RGB stuff but I wanted to go with the corsair brand for all of that.I know i could probably downgrade the GPU to a 3080 and i still might but I wanted to know if the 3090…
-
How is Windows 10 on disc installed in a new build when the cases shown do not have room?
I am putting together a build and will be getting Windows 10 Pro on disc. But the cases shown in the build list to pick from do not have any external openings to install one or more BD/DVD writeable drives. Are there cases still that can have those drives installed in them in the store? Or will the copy I purchase be…
-
i7-11700K or i9-10850K "better"?
There is only a $20.00 price difference now for these. Would I gain anything by getting the i9 over the i7?
-
Is this build compatable?
This is my first PC build so naturally i dont have a clue what im doing, ive done some research and considered my budget of around £800 ($1168.32), id use it for majorily gaming and entertainmemt and some other work with one monitor, but hoping to upgrade to two monitors soon. Would anyone be able to confirm for me that…
-
Graphic card compatibility with a HP Pavilion Desktop Computer
We have a HP Pavilion Desktop Computer, Intel i5, 12GB RAM, 256GB SSD (TP01-1026) and we want to put a nvidia 1650 card in it. The card has a 6 pin connector. Must it be used, or is it enough to put the card in a PCIe slot? Thanks
-
Audit my build?
Hi folks, I'm a rookie, and I would really appreciate any advice or help from knowledgeable members of this community to see if I've made any mistakes with my build: Very much appreciate your time and advice!
-
Help Choosing Parts
This discussion was created from comments split from: How to Choose Parts for Your Custom Computer Build.
-
Upgrade for Windows 11 Support
Folks, Microcenter build me a computer about 4-5 years ago. I have a ASUSTek X99-Deluxe II (Socket 2011) motherboard, an Intel Core i7-6800K @ 3.40Ghz and 16.00 GB Dual-Channel 1223MHz (16-18-18-38) memory. Windows 11 compatibily upgrade is telling me this hardware is not support for the upgrade. I think it maybe cause…
-
Choosing RAM
This discussion was created from comments split from: NVIDIA GeForce RTX 3070 Ti Build Guide.
-
Need help picking parts
I'm Tori. Interested in building my first pc but not quite sure what works good together, here is one of many ideas. I have given myself a budget of $500 but I went over that. I want to be able to plate Fortnite, Rocket league, and possibly stream on twitch. My first idea was a AMD- Ryzen 3 3200G. AMD - Ryzen 5 5600G…
-
upgrade to my internal SSD
I have a Powerspec I purchased from you a few years back and I need to upgrade my SSD (C:) drive. It currently has a Micron_M600_MTFDDAY256MBF drive and I need to replace it. I have backups of the system drive and it is still operational, just need to know compatible drives. What would you suggest for replacement? Thanks
-
where to get a graphics card......
so a few weeks ago i posted a question about how to fix my 980. long story short, i found out it is toast. so i need to find a new graphics card. but the thing is that i want it brand new because i want to buy something i can trust. i saw a 1050 at microcenter for $300 but the msrp for one is only $109. i want to know if…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. It will be for a triple monitor sim racing setup. I would ideally be under $3000 but $3500 is my max. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=ffec3be5-46f3-46b3-8b2a-0571be799557
-
Looking for help with a gaming pc
Put this list together and I would like to know how well it would work, if I need to add or remove anything from the build. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=54cbb4cd-c1fc-4a04-8efa-458d5bef3ccf
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=5dcbdb9f-2308-4759-86fd-d6df285d9e3d
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder-amd.aspx?load=ac12971a-f844-4fbc-afe5-1d3ec7b33269
-
Rebuilding, looking for some peer review
It's been a while since I've upgraded my computer, so now it's time to rebuild. I'm on a $1,500 budget. I'm going to keep my old data drives and peripherals, so I don't need to buy those. I'm looking for some review, primarily on compatibility and cooling. I'm pretty sure these should all work properly together, but it's…
-
Need Help Choosing Parts
I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=90dfeacc-563f-4ea2-a7bd-01d7df3ca90a
-
Help building gaming PC
https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=8ef49ece-8b02-43fe-9df2-0845ef72922a I am looking to build a PC for gaming only on my home theater system (essentially a steam machine). I am a total novice when it comes to computers and just a casual gamer. That being said I would like to be able to run…
-
Liquid cooling for i9-11900k
Looking for a single-radiator 120mm liquid cooling option for new build with i9-11900k. Considering Corsair Hydro Series H60 or H80 - are these sufficient for running at stock clock or maybe limited overclocking? Any better suggestions?
-
Need help Building a PC: around $2000 Gaming PC
Looking to move from mac to a pc. Mac isn’t cutting it for me. In need for a major upgrade. I’m looking to invest in a pc that I can use for gaming, work (amazon, eBay type platforms) and school. Any advise would be great appreciated thank you
-
Help Choosing Parts
This discussion was created from comments split from: How to Choose Parts for Your Custom Computer Build.
-
I need some help on this build
https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=e7326dc0-9b8d-494e-9866-4d2ca1331a93 I hope to bring the price down but still want the Corsair Case and Corsair AIO
-
Can I get some feedback on this build?
https://pcpartpicker.com/list/mLk4xc
-
Looking for input on new build
This is my lazy man build for my new machine where I won't take any drives out of my current (at least initially). This is going to be a big upgrade from me since I am currently running a 4820K processor so I've been playing around with a build that will last me quite a while in the future. Since I haven't put anything…
-
Phanteks Enthoo Pro II build out
Hey there, so I have plans on building out of the Phanteks Enthoo Pro II case. One of the things that is kind of bothering me after getting it is will the Phanteks Revolt X PSU be able to take the loads of newer GPUS if I build a dual system. Ideally, I would like to have a full ATX streaming and video editing at the top…
-
im going to attempt to build a gaming pc
cpu- ryzen 7 2700 gpu- gtx 1660 super power supply- thermaltake smart rgb 700w case- musetex atx mid tower case ssd- 500gb wd blue motherboard- gigabyte b450 cpu cooler- Cooler Master Hyper 212 Evo CPU Cooler are these parts all good and compatible?
-
How good is this build?
Hi all, I have been fiddling with trying to get a new PC built for about 2k. Not too worried if I go a bit overbudget. I know GPUs are a bit hard to come by right now, but I'd prefer a GTX 3000 series. I'd also like an NVMe M.2 as my boot drive, a 2 TB SSB and 4-6 TB HDD. Looking to run three montiors and do some…
-
Salvage some parts for a Blender pc
https://pcpartpicker.com/b/3DRkcf Here is my current system, but I think I need to get a new motherboard to fix my issue, so I figured I would take this moment to make it to render blender better because I'm currently using a Mac laptop due to my pc problem. So I'm asking for help to see what I should get and replace what…