-
Can’t put pictures in “Custom pc build showcase.“
I have been creating the “Custom pc build showcase” and have done all the parts except put pictures in. I have 5 pictures of my pc to put in and after putting them in it says around 27.6mb. The note at the bottom of the screen says can’t put pictures in more then 2 mb, so when I change all the image sizes to medium it says…
-
Internet FINE, Download speed FINE...but upload speed is now ABYSMAL
Recently bought a new, high end PC and also changed out a new modem from my ISP rented one...all was fine and I was able to upload and stream with 240 MBPS download and an average of 10-12 MBPS upload no problem. All of a sudden yesterday - my Download speed remains same but my upload speed crashes to 0.5 MBPS or less.…
-
Need help cancelling online order please!
Order#: 11403798Can I change the pick up person on this order or cancel this so I can make a different order? Please help going to the store asap thank you
-
I need to cancel a reservation I made yesterday.
I don't feel comfortable just letting it lapse. How do I cancel?
-
Looking for WinBook TW101 default drivers
My touch screen has stopped working after a windows update and looking for the drives for the TW101. Also could you tell me which driver(s) would effect the touch screen.
-
I purchased the Powerspec G705. Can i use any DDR4 2666 memory in it
I purchased this machine : PowerSpec G705 Gaming Computer; AMD Ryzen 7 2700X 3.7Ghz Processor; AMD Radeon RX 5700 XT 8GB GDDR6; 16 DDR4 It comes with 16gb (2x 8gb) of Gold Key Technologies DDR4-2666 / PC-21300 Ram. Microcenter doesnt stock this memory any more.. can i put any other DDR4-2666 memory in it, ie Crucial…
-
Can't get Wifi to work with new PC! :(
We bought a new PC (not pre-built) - to connect WiFi, we got an ethernet cable & port, but it says "invalid IP address".
-
MSI B550 Gaming Edge WiFi Windows Installation Problem
Just put together a new system using the board listed in the subject along with an AMD Ryzen 7 3700X and Sapphire Radeon RX 5600 XT. I have a Samsung M2 and a Samsung SSD installed. I have a store purchased copy of Windows 10 with USB. The install seems to work fine up until the reboots start. The first reboot where it…
-
I need help reinstalling all of the drivers/software after resetting the o/s for Powerspec G356
After resetting the o/s for my Powerspec G356, I am having problems reinstalling the software listed at http://www.powerspec.com/support/support_archive.phtml?selection=G356. I clicked on C->motherboard-RGB->PolychromeRGB->iAsrPolychromeRGBSetup(v1.0.42) to install it. I want to control the fan. It installed c:\Program…
-
Issues regarding new custom built PC.
I recently bought parts for a custom PC at Microcenter. The PC works fine after I built it but there are some issues that I can't seem to solve. I would really appreciate any help in solving these problems. I bought all the parts new except for the graphics card in store and its been 2 weeks since the purchase of all the…
-
SSD and HDD
It’s my first time having duel hard drives, but I don’t know how to save or get files from the HDD. I thought I found the drive and attempted to save to it but it didn’t work.
-
I really don't mind waiting for a new product but please let us be on a reservation list
We get it product launches are hard. Between COVID causing short supply and scalpers buying up all the new stuff to sell at over 2x the price on ebay, its really hard to keep this stuff in stores. I understand that making it an in store only item helps with that second point. But there is no way a store in 2020 that sells…
-
Smallest screws possible, how do I find a screwdriver?
okay so I'm trying to disassemble my Asus RoG G75VW to clean the keyboard because I splashed soda on it and an hour later I was getting graphical glitches on my display that don't replicate when displayed on a different screen so it's hardware. (Been cleaning parts inside hoping it fixed it and that I won't have to replace…
-
xbox series x
Do you have any in stock at the stores? Specifically Mayfield heights?
-
Pc build help
I'm not sure if this is the right place to put this, but I recently built a pc and I was having some issues with the pc actually booting up to a bios post screen or even starting up any of the components. My setup consists of these components: motherboard: z390-e ROG strix gaming cpu:i9 9900k ram:32gbs 3600 mhz corsair…
-
PowerSpec B245 doesn't see video card
We bought a PowerSpec B245 and installed a discrete video card (Sapphire Radeon RX 580). We added that card as we need multiple HDMI ports. When I powered up the unit, the video card wasn't recognised. I tried to make changes in the BIOS / UEFI setup but there no options visible. What options do we have?
-
Xbox series x release day
Does anyone know if microcenter gets the new consoles on launch day? I just discovered microcenter last year when I got into pc gaming and have never bought a console from them but would like to get the series x next week from them if possible.
-
RTX 3080 & Ryzen 5000 STL
I went to the store at like 11am on thursday for the ryzen 5000 launch and as soon as I got there they started deep cleaning. and when I came back they were sold out. bummer but it happens. just curious on how I should go about getting these items or knowing when they’ll get in stock.
-
Broadcast Digital TV Tuner for Monitor
I have a friend who has an existing TV and hates it. They absolutely do not want a smart tv. This is a non-negotiable point. They already have an audio system and and streaming device, and Apple TV. He I'm trying to put together a system with a monitor and an over the air digital TV tuner. Could you please recommend an…
-
Monitor no signal but working the day before
I finally put all my pc parts together and was playing games on it with no problem. When I was done for the day I turned everything off and went to bed. The next day I went to turn my pc and monitor on again and my monitor said there was no signal. I looked up so many videos hoping that they would help. I cleaned my ram…
-
Nvidia RTX 2000 availability
Hi Microcenter, I am going to build a new computer, and started to do so on your site but it appears these cards are not available (Denver store). Could I get some input if they are? I don't yet have a specific model in mind other than the RTX 2070 line. Could I get some help? Do you all offer that I can converse with one…
-
Winbook TW100 issues any ideas appreciated
I have a Winbook TW100 that doesn't load windows properly, I can get to the recovery page but the touchscreen doesn't work either. Have tried USB to laptop but laptop doesn't "see" it
-
FIRST Robotics Team in Need of Assistance
Hello, my name is Joshua Wentworth and I am a mentor for a First robotics team in the Kansas City metro area (FRC 1987). Recently my team has started meeting in person as the school district allows but in person attendance of students and mentors is limited due to social distancing constraints. We have been thinking…
-
How are black Friday sales here?
I'm new to ohio and I'm looking to make a new pc, I'm doing massive over time and plan to have around 4000-5000 dollars for black friday, I'm not sure I'll have enough for all the parts i want but the main goal will be the more expensive parts followed by the memory ram cooling and the rest. But the more money I save the…
-
Rattling Noise New PowerSpec Desktop
Hi all, I just purchased a desktop today, PowerSpec G434, and there is a faint rattling noise coming from the fans on the inside of the "ceiling" of the case. Any ideas how to fix this, or should I just take it back to the store to be looked at? I don't have the 2-3 year warranty, but the standard 1 year warranty should…
-
New PowerSpec G436 stopped working
Bought a new G436 with RTX 3070 card Friday. Was working fine, then stopped working. Seems to power up, monitors come on, but thats it. Can't get into start up screen/bios. Checked connections, all the standard checks, don't see any issues. Under warranty but anything else I can try before taking it in?
-
3D PRINTER
I’m looking for a 3D printer core XY, print area aprox. 300mx300mmx300mm
(which is 11.8inx11.8inx11.8in) Quality of printing should be higher than 0.15mm and the
nozzle should be 0.3mm/0.4mm (not looking for a quality lower than that). I need it to print in several colors. Do you have a product like this? If so, do you…
-
3D PRINTER
I’m looking for a 3D printer core XY, print area aprox. 300mx300mmx300mm
(which is 11.8inx11.8inx11.8in) Quality of printing should be higher than 0.15mm and the
nozzle should be 0.3mm/0.4mm (not looking for a quality lower than that). I need it to print in several colors. Do you have a product like this? If so, do you…
-
recomendation, i dont know much about building a pc so...
hello, which other mother board besides the gigabyte b4 60m ds3 H, with the 10th gen core !5 ?
-
When will the Ryzen 5600X and RTX 3070 be back in stock in Rockville location?
I'm making a PC with these parts but I don't know when they're back in stock.
102 discussions
235 comments
Most recent: I need a copy of my receipt emailed to me by PaulL
December 20
