-
Please Help! First Build:)
Hey all, I'm looking to build my first PC. I have some knowledge of computers as a Comp Sci Junior in College, but definitely not enough to make my own decisions uninformed. I am looking to use my PC to run some heavy design software, a few games (Valorant, League of Legends, Apex Legends, etc), and lotssss of coding.…
-
B677 (Adding HDD)
Quick question: are SATA cables not included? I purchased a WD Black for a second drive and started excitedly installing it only to (possibly) find no way to connect it. I wish I'd known that when I purchased it. Only cables I see are those attached to the power supply. Thanks in advance!
-
Using non-QVL RAM
I'm getting an ASRock B450M PRO4 motherboard and am planning on just going with the popular 16gb G. Skill DDR4-3200 RAM Ripjaw V series. I went to the QVL section of the motherboard page on ASRock's site and they only have memory lists for older Ryzens and not the new ones with the Matisse core. I'm aware that it's…
-
Mobo WiFi or no?
I've already boiled my choice of motherboard to the ASRock B450 PRO4 mATX. The big question for me is whether or not to go for the one with WiFi or not. I already have a PCE WiFi adapter in my current system (ASUS PCE-AC56) so I could just simply use that in the new build, but could the integrated WiFi on the ASRock…
-
Putting together a build for my kid. Please advise.
I read that great guide here about choosing parts and put this build together, but it might be more than I need. Any advise would be much appreciated. Looking to play CS GO, GTA V on Steam. Thanks. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=e1855d51-3fc1-408c-96df-71e4440917fa
-
Bridge Networking Question
Hi I was wondering if you guys sell any outdoor WiFi bridges antennas that will do at least 1000ft and what brand do you prefer and why thanks
-
need a little help Slash suggestion
Hello I don't know what it is but my first build does not seem to cut it anymore. I need help with decisions/pointer on what I need to upgrade my current build can be seen herehttps://pcpartpicker.com/user/Aziel/saved/# I know things have to change, but I want to stick to AMDI plan on using it for both gaming and streaming…
-
Do you have this product in stock.please follow the below link
https://pcpartpicker.com/list/WRYyQq
-
Review my first build please...
I am bulding my first PC and would like a review. I plan to use this computer to play games like the sims4, GTA, Minecraft, Secondlife, and code a little. Nothing to heavy. My intentions are to build something powerful on a budget that I can upgrade later without to much of a hassle. I am having trouble picking out a…
-
New Gaming PC Build $1120
I currently own a 2018 Blade 15 Base model with GTX 1060. I took it in to Microcenter a couple days ago to be looked at. The coil whine has been pretty bad and then the other day the fan got so loud, that it woke me out of my sleep. They just called me and said that its overheating should be replaced. Microcenter no longer…
-
Build question
Hey there I'm planning on building my first gaming PC. I'd like a PC that'd run any type of games very well and maybe even a VR set. I've put this together, do you guys know if these parts are compatible and if this is a good build? I'd appreciate any sort of feedback.…
-
Help with compatibility / is this right?
Hello there! First time here, haha. I need help just making sure all of these parts work! I initially made my build on pcpartpicker but prices on here were a lot cheaper, but I had to change things around since I could not find the exact parts. Here is the link for the parts on…
-
Help with my first budget gaming build
I am currently looking into building my first PC. budget is about 1000 but can go up to 1200 all things included if needed. Ideally I would like to pick up everything in store in a few weeks. Minneapolis (St. Louis Park) location.…
-
Beginner at building, looking for advice
Too start off this will be my first build. I had ordered a pre-built off amazon but with everything going on the company was unable to supply but im taking that as a blessing because i was on the fence of just building my own PC and this just confirms it. So what i need help with is pretty much what to buy, ive only ever…
-
Does anyone have Corsair H100i RGB Platinum + G.Skill Trident Z Neo RAM?
If so, does the RAM clear the gap to fit between the DIMM slot and the radiator fan(s)?
-
Out of stock
My micro center is out of the ryzen 5 3600 and 3600x and the 1660 super do u know how often they restock
-
Plex server/Channels DVR Server refresh
Greetings all, I am updating my media server from a haswell i3. I am keeping all storage, Windows 10 pro. I only use graphics local to setup and service the machine and have been using the onboard. I am looking at the following and perhaps a new power supply.…
-
Monitor
I would like a monitor for my powerspec g227 for 150 dollars max I was thinking the Asus eye care free monitor
-
Need advice for build.
Hello everyone, I am looking to build my first gaming computer but I don't really know about computer parts, etc. I have a budget of $1500 that can go over a bit. I don't need any peripherals. I would like to know what build y'all recommends for 2020 that will last and fits under my budget. I mostly play League of Legend,…
-
Trying to upgrade my gaming rig
Hello everyone, I am wondering if you could give me some suggestions on what to upgrade/add to my gaming pc first. I am getting near-60 fps on most non-GPU-intensive games, and for a GPU-intensive games, I am getting 40-50 fps. I would rather upgrade to improve my frames and to be able to stream games rather than make…
-
PC Build - Question on Parts Compatibility
Hello! I am building a PC using a mother board (Asus STRIX B350-F GAMING ATX AM4 Motherboard) and processor (AMD Ryzen 5 2600 3.4 GHz 6-Core Processor) that was given to me. I am looking at buying the following parts to go in the build. Will these work with that motherboard and processor? Corsair Vengeance LPX 16 GB (2 x 8…
-
best motherboard and CPU upgrade options?
current motherboard is an MSI 760 GMA https://us.msi.com/Motherboard/760GMA-P34-FX/Specification (dimensions are 9.3 x 8.1 x 2.2 inches) so my question is what is a good motherboard similar in size to this one that will fit in my PC case that is also compatible with modern CPU's? i want to try to upgrade to be able to play…
-
800-900 pc build
I need help finding a pc that could run games at high settings while streaming/recording
-
What do you all think ?
Hello everyone, I just made this build. What do you all think about it? Any recommendations or changes? Can someone double-check for the compatibility of all parts? My budget is around $1500-$1600. The build: https://www.microcenter.com/site/content/custom-pc-builder.aspx#selector_84 Thank you !
-
Home work graphics PC
This is my 1st build. My wife and I have a home - based graphic design and photography firm. Our current computer is becoming outdated (again) so, I’m going to take swing at building a custom machine that we can update ourselves when necessary instead of always purchasing a new one. We run the entire Adobe CC apps. In…
-
Go budget or all in?
True to my name, I'm fighting with myself over which build to go for. I made 2 build lists on here and the difference between them in price is $300. Not a huge difference but significant enough. The main difference between the builds boils down to the motherboard and video card. Went from the AMD x570 to the older B450 and…
-
Changing the case on my revolt 2
Hey guys. I have a revolt 2 but I want to change to a different case. I have dogs and bunnies that shed and their hair is getting inside. Im a moron and need an easier case to open and clean all the dust and hair out. Any suggestions? I really don't have a budget.
-
Question about upgrading Lenovo
I was given a Lenovo desktop and I was trying to add a video card to it, and the power supply does not have the right cables to install. After doing research I learn that Lenovo uses a different power supply and motherboard pin and I can not add a video card that requires power from PSU. IS it worth adding a low profile…
-
Graphics Cards
I am searching for a refurb IMac..i would like to buy one with a graphics card that would work with cinema grade editing program—it requires metal compatibility. Can someone make suggestions for what graphics card I should buy, please? Thanks :)
-
Help
Some questions would this be a suitable build https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=e34aba9d-3960-42b1-9fbd-2fe0139de3aa and do u guys have cheap tp link WiFi adapters?
